Dishwasher Valve

Note: This is the complete solenoid assembly kit. For armature & linkage assembly only, use WD1X1316.

The Solenoid Assembly is an OEM part for GE dishwashers. It plays a crucial role in controlling the flow of water into the dishwasher by activating or deactivating the drain valve. This assembly is essential for ensuring that the dishwasher fills and drains at the correct times during the wash cycle, which is pivotal for the overall efficiency and effectiveness of the appliance.

Common causes for a Solenoid Assembly to fail include wear and tear over time, mineral buildup from hard water, or electrical failures that prevent the solenoid from operating as intended. 

Symptoms of a bad Solenoid Assembly include:

• Failure of the dishwasher to drain properly, leading to water accumulation at the bottom.
• The dishwasher not filling with water as it should, affecting the cleaning process.
• Unusual noises coming from the dishwasher, which may indicate the solenoid is failing to engage or disengage correctly.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Water Inlet Valve is an OEM part for Whirlpool dishwashers. It controls the flow of water into the dishwasher during the wash and rinse cycles, ensuring the correct amount of water enters the machine for optimal cleaning performance.

Causes of a bad water inlet valve can include wear and tear over time, mineral buildup from hard water, electrical issues, or damage to the valve components. Blockages or malfunctions can prevent the valve from opening or closing properly.

Symptoms of a bad water inlet valve include:

• Dishwasher not filling with water or filling slowly
• Water leaking into the dishwasher when it’s not in use
• Error codes related to water supply issues
• Noisy or buzzing sounds during water intake

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Float Switch Kit is an OEM part for Whirlpool dishwashers. It includes the float and the switch mechanism that monitors and controls the water level inside the dishwasher. The float switch ensures that the dishwasher does not overfill by signaling the water inlet valve to shut off the water supply once the appropriate level is reached.

Causes of a bad float switch can include debris or mineral buildup, wear and tear over time, or electrical failures within the switch mechanism. A malfunctioning float switch can lead to water overfilling, which may cause leaks and inefficient washing performance.

Symptoms of a bad float switch kit include:

• Dishwasher overfilling with water
• Water leaks during operation
• Dishwasher not filling with enough water
• Error codes related to water levels

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM part for Bosch dishwashers. This part controls the flow of water into the dishwasher during the wash and rinse cycles. The valve ensures that the correct amount of water enters the appliance.

Common causes of a bad valve include mineral buildup from hard water, electrical issues, or wear and tear over time.

Symptoms of a bad water inlet valve include:

• Dishwasher not filling with water
• Low water pressure during cycles
• Leaks or water pooling under the dishwasher
• Dishes not being cleaned properly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Water Inlet Valve is an OEM part for Frigidaire dishwashers. It plays a crucial role in the hydraulic system by controlling the flow of water into the dishwasher. The valve is designed to precisely regulate water pressure and supply the appropriate amounts of water at specific times during each washing cycle.

Causes of a bad valve include wear and tear over time, mineral buildup that obstructs flow, or damage from freezing or overheating. 

Symptoms of a bad valve include:

• Improper or inconsistent water levels during the cycle
• Leaks or flooding in the base of the dishwasher 
• Inability to select or begin washing cycles
• Illumination of error codes relating to water problems

This OEM Frigidaire replacement part is also compatible with Gibson, Kelvinator, and Kenmore models. 

The Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This genuine OEM part ensures precise water flow control, allowing your dishwasher to operate efficiently and effectively. Designed specifically for Samsung dishwashers, the water valve guarantees a perfect fit and seamless integration with your appliance. By replacing a faulty or worn-out valve with this high-quality part, you enhance your dishwasherGÇÖs ability to clean dishes thoroughly while preventing leaks and water damage. The durable construction of the Dishwasher Water Valve provides long-lasting reliability, reducing the need for frequent repairs and saving you time and money. Installation is straightforward, making it an ideal choice for DIY enthusiasts looking to restore their dishwasherGÇÖs functionality quickly. Trust in the quality of this genuine OEM part to deliver consistent performance and extend the lifespan of your Samsung dishwasher, ensuring a hassle-free and enjoyable kitchen experience.

The Filter Ball is an OEM replacement part for GE dishwashers. As a key internal filtration component, it helps trap and remove food soils and other residue from washing water to maintain hygienic cleanliness standards. 

Causes of a bad filter ball can include worn filter mesh that no longer adequately strains soils or substances that pass through more readily over time. 

Symptoms of a bad filter ball include:

• Dirty wash water that fails to fully sanitize dishes
• Cloudy rinse water that leaves behind streaks and residue 
• Excess food debris collecting in drainage areas 

This GE replacement filter ball is also compatible with some Hotpoint, RCA, and Kenmore dishwashers.

The Check Valve Flapper is an OEM replacement part for GE dishwashers. It is a small but crucial component located within the water inlet valve assembly. The check valve flapper regulates water flow into the dishwasher, allowing water to enter during the fill cycles but preventing backflow when the water is drained. 

Causes of a bad check valve flapper can include wear and tear over time, mineral buildup that causes sticking, or damage to the flapper itself. This prevents the flapper from opening and closing as intended.

Symptoms of a bad check valve flapper include:

• Slow or incomplete filling of water 
• Dripping or leaking water from the inlet area
• Error codes related to water issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models. 

The Water Valve is an OEM part for GE dishwashers. It controls the flow of water into the dishwasher during the wash and rinse cycles.

You should replace the water valve if it becomes defective or worn out. Over time, mineral deposits can build up, or the internal components can fail, leading to improper water flow. This can affect the dishwasher's performance and water efficiency.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Low water pressure during the cycle
• Leaking water from the valve area
• Dishes remaining dirty due to insufficient water

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Valve Assembly is an OEM replacement part for GE dishwashers. It consists of multiple valves that work together to control water flow during different stages of the wash cycle.

Causes of a bad water valve assembly can include mineral buildup restricting flow, cracks developing in valve housings allowing leaks, and failure of components like solenoids or inlet/outlet valves.

Symptoms of a faulty water valve assembly include:

• Abnormal sounds or squealing during filling
• Inability to properly fill or wash dishes
• Slow, inconsistent, or no water circulation
• Water leaks in the valve area

This GE replacement is compatible with additional brands like Hotpoint, Profile, and select Kenmore models as well.

The Check Valve Assembly is an OEM replacement part for Whirlpool dishwashers. It is a component that regulates water flow and pressure, allowing water to enter the dishwasher during designated cycles but preventing backflow. The check valve plays an important role in the overall water distribution system of the dishwasher. 

Causes of a bad check valve can include mineral buildup blocking the valve ports over time, damage to the valve mechanism or seals, or decreased valve integrity from wear and repeated use. 

Symptoms of a bad check valve include:

• Leaks or water not properly entering the dishwasher 
• Incomplete or inefficient washing and rinsing cycles
• Strange sounds coming from the water inlet area
• Higher water usage due to faulty draining 

Note: O-ring included.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Valve is an OEM part for Frigidaire dishwashers. This valve controls the flow of water into the dishwasher, ensuring the correct amount of water enters the tub during the wash cycle.

Causes of a bad water valve can include mineral buildup from hard water, electrical failures, or wear and tear from regular use that affects the valve's ability to open and close properly.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Leaking water around the valve area
• Inconsistent or insufficient water levels during cycles
• Unusual noises when the valve is in operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Water Valve is an OEM replacement part for GE dishwashers. It controls the flow of water into the dishwasher during each cycle stage. The valve regulates water temperature and volume to achieve the desired wash and rinse results.

Causes of a bad water valve can include mineral buildup interfering with valve function, worn internal seals, or obstruction in the valve inlet or outlet ports.

Symptoms of a bad water valve include:

• Incorrect or inadequate water levels during the cycle
• Inability to reach proper wash or rinse temperatures
• Water not shutting off fully between cycles
• Leaks from the water inlet area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Inlet Valve is an OEM part for LG dishwashers. This part regulates the flow of water into the dishwasher tub during the fill cycle, ensuring the proper water level for effective cleaning.

Causes of a bad part can include sediment or mineral buildup obstructing the valve, physical damage from water pressure or impact, or electrical malfunctions preventing the valve from opening and closing correctly.

Symptoms of a bad Water Inlet Valve include:

• Failure of the dishwasher to fill with water
• Overfilling or insufficient water levels in the tub
• Leaks from the valve or water inlet area
• Error codes or indicator lights related to water supply issues

This OEM LG part is also compatible with some Kenmore models.

The Check Valve and Hose Assembly is an OEM part for GE dishwashers. This part prevents the backflow of water into the dishwasher, ensuring proper drainage and protecting the appliance from potential water damage.

Causes of a bad check valve and hose assembly can include blockages from debris, wear and tear over time, or damage from improper installation. 

Symptoms of a bad check valve and hose assembly include:

• Water not draining properly from the dishwasher
• Standing water in the bottom of the dishwasher
• Water leaking from the dishwasher
• Unusual noises during the drain cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Valve is an OEM part for Frigidaire dishwashers. It is responsible for controlling the flow of water into the dishwasher, ensuring the correct amount of water is used during each cycle.

Causes of a bad valve can include mineral buildup, wear and tear over time, or damage from high water pressure or freezing temperatures.  

Symptoms of a bad valve include:

• Dishwasher not filling with water
• Water leaking from the valve area
• Irregular water levels during cycles
• Delayed or incomplete wash cycles

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.