Dishwasher Valve

This diverter assembly kit controls the dishwasher's wash-water routing. It switches flow between spray arms for targeted cleaning. Replacing a failed diverter restores proper water distribution and helps recover normal wash performance.

• Directs wash water between lower and upper/middle spray arms as the cycle advances
• Works with the control to provide zone/alternating spray for efficient cleaning
• Failure can cause poor cleaning on one rack or water spraying from only one arm
• May produce repeated clicking/grinding from the sump area or extended cycles while indexing

• Disconnect power and shut off water supply before servicing; expect some residual water
• Access the diverter at the sump/pump area; follow your model's service procedures
• Ensure seals/O-rings are properly seated and parts are aligned before tightening
• Run a short test cycle to check for leaks and confirm both racks receive spray

The Float Assembly is an OEM replacement part for LG dishwashers. It is a sensor located inside the dishwasher that monitors water levels during wash cycles. The float assembly precisely indicates water levels to the control system to determine adequate water is available throughout the cleaning and rinsing functions. Proper water level detection is crucial for achieving sparkling clean dishes.

Causes of a faulty float include mineral buildup on sensors overtime, cracks or leaks developing, and damage to electrical wiring from impacts.

Symptoms of a bad float assembly include:

• Incomplete or inefficient wash cycles due to low water levels
• Water remaining in the bottom of the tub after a cycle
• Drainage issues related to inaccurate water level readings
• Error codes related to improper filling and draining of water

This OEM LG part is also compatible with some Sears/Kenmore models.

The Dishwasher Brake Case Assembly is a high-quality replacement part designed to ensure your Samsung dishwasher operates smoothly. This genuine OEM part guarantees compatibility and a precise fit, maintaining the integrity of your appliance. The brake case assembly plays a crucial role in controlling the doorGÇÖs movement, preventing sudden closures and potential damage. By replacing a worn or faulty brake case, you can restore your dishwasherGÇÖs functionality and extend its lifespan. Installing this assembly is straightforward, allowing you to quickly get your dishwasher back to optimal performance. Crafted with durable materials, the Dishwasher Brake Case Assembly offers reliable performance and long-lasting results. Trust in this genuine OEM part to provide the functionality and safety your kitchen appliance needs, enhancing your overall user experience and ensuring your dishwasher runs efficiently.

The Drain Solenoid is an OEM part for GE dishwashers. This component controls the draining function by opening and closing the drain valve, ensuring that water is properly expelled from the dishwasher at the appropriate times during the wash cycle.

Common causes of a bad drain solenoid include electrical malfunctions, buildup of debris or mineral deposits, and general wear over time. These issues can prevent the solenoid from operating correctly, leading to improper draining.

Symptoms of a bad drain solenoid include:

• Standing water at the bottom of the dishwasher after the cycle
• Unusual noises during the draining process
• Error codes related to draining
• Water leakage from the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Check Valve is an OEM part for LG dishwashers. This component plays a crucial role in preventing backflow of water into the dishwasher, ensuring proper drainage and efficient operation during the washing cycle.

Causes of a bad check valve can include clogging due to food particles or debris, wear and tear over time, or damage from exposure to harsh chemicals or high water pressure. These factors can compromise the valve's ability to function correctly, leading to issues with water flow.

Symptoms of a bad Check Valve include:

• Water not draining properly
• Dirty water backing up into the dishwasher
• Unpleasant odors from standing water
• Incomplete cleaning cycles

This OEM LG part is also compatible with Sears/Kenmore.

This overfill control float sits in the dishwasher tub and rises with the water level to signal the float switch to stop filling. Replacing a cracked or sticking float helps prevent leaks and recurring fill issues. What it does:

• Rises with the water level to actuate the float switch and stop the inlet valve
• Helps prevent overfilling and water leaking from the door
• A float stuck in the UP position can cause no fill or short fill
• A float stuck DOWN or damaged can allow overfilling

• 1 overfill control float

• Disconnect power and turn off water before servicing
• Remove the lower rack; lift out the old float from its guide and clear any debris in the well
• Insert the new float, ensuring it moves freely and reliably actuates the switch when raised

This water inlet valve regulates the flow of household water into the appliance. When the control energizes the solenoid, it opens to deliver the correct amount of water for filling and operation, restoring proper flow and performance.

• Controls on/off flow from the household water supply
• Opens when signaled to provide the correct amount of water for fill functions
• Helps maintain consistent water flow to the system
• Common failure symptoms: no water flow, slow fill, intermittent filling, or leaking at the valve body

• Disconnect power and turn off the water supply before servicing
• Place a towel to catch residual water and relieve line pressure
• Note tubing and wire locations before removal; transfer any brackets or clips as needed
• After installation, restore water and power, check for leaks, and purge air from the lines

This float detects and monitors water levels in the appliance's sump/drain area to help prevent overfilling and water pooling. Replacing a damaged or stuck float restores proper water sensing and reduces leak risk. What it does:

• Senses water level in the drain pan or sump so the appliance can stop or redirect water flow
• Helps prevent water from overflowing or pooling under the appliance
• Can stop false fill/overfill conditions caused by a stuck or broken float
• Fault symptoms include water pooling, continuous or unexplained filling, or failure to drain properly

• Always unplug the appliance before accessing internal panels or service areas
• Remove the required access panels or trim to reach the sump/drain area; follow the model's service manual
• Handle the float and any clips or wiring carefully to avoid damage; reconnect any electrical connectors securely
• After installation, restore power and run a manual fill/drain test to verify proper operation

The Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This genuine OEM part ensures reliable water flow control, allowing your dishwasher to fill and drain effectively during each cycle. Designed specifically for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance. The high-quality construction of the water valve enhances durability, reducing the need for frequent replacements and providing long-lasting functionality. By using this genuine OEM part, you can trust that your dishwasher will operate smoothly, preventing leaks and ensuring efficient washing performance. Installing the Dishwasher Water Valve is straightforward, making it a convenient choice for DIY repairs. Whether your original valve is malfunctioning or showing signs of wear, this replacement part restores your dishwasherGÇÖs reliability and efficiency. Invest in the Dishwasher Water Valve to maintain the excellent performance of your Samsung dishwasher and enjoy hassle-free dishwashing for years to come.

This float controls your dishwasher's water level. As the tub fills, it rises to signal the float switch to shut off incoming water, helping prevent overfilling and leaks.

• Lifts with the water to actuate the float switch and stop filling
• Helps protect against overfilling and door leaks
• Replace if the float is cracked, deformed, waterlogged, or sticks in its well
• Symptoms can include: won't fill or stops filling early; overfilling or leaks at the door

• Disconnect power and shut off the water supply before servicing
• Remove the lower rack and locate the float in the tub floor
• Lift the old float straight up; clear any debris; seat the new float and free up-and-down movement
• Restore power and run a fill test to proper operation and check for leaks

The Dishwasher Float Cover Assembly is essential for maintaining proper water levels in your dishwasher. This genuine OEM part ensures reliable performance by accurately regulating the float mechanism. Designed to fit a variety of Samsung dishwasher models, it guarantees a perfect fit and seamless integration with your appliance. The Float Cover Assembly helps prevent water overflows and ensures efficient washing cycles, enhancing the longevity of your dishwasher. Its durable construction withstands daily use, providing consistent operation over time. Easy to install, this part allows you to quickly restore your dishwasher's functionality without the need for professional assistance. By choosing this genuine OEM part, you benefit from the quality and reliability that Samsung is known for. Trust the Dishwasher Float Cover Assembly to provide consistent and dependable operation, ensuring your dishes come out clean every time.

The Water Inlet Valve is an OEM component for Whirlpool dishwashers. As the critical connector between the home supply lines and the dishwasher itself, this valve oversees the entry of water into the machine for wash and rinse cycles.

Causes of inlet valve malfunction include mineral deposits accumulating inside the valve body or worn seals no longer maintaining a tight closure following years of usage. This places increased strain on internal mechanisms. 

Symptoms consist of:

• Slow or irregular water fills failing to reach proper levels
• Fluctuating water pressure inputs 
• Drips or continuous leaks at the water connection
• Inability of cycles to advance beyond initial fill stages

This Whirlpool OEM replacement is compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers as well.

This replacement pump moves water/condensate through your appliance so it can drain or recirculate as designed. Replacing a weak or failed pump restores proper water removal and helps prevent leaks, overflows, or nuisance shutoffs.

• Moves collected water from the sump/collection area to a drain hose or internal passage
• Maintains correct water level to prevent overflow conditions
• Common failure signs: water won't pump out, leaks near the base, or loud buzzing/grinding from the pump
• May trigger "bucket full," drain, or pump-related error indicators, depending on the model

• Disconnect power before servicing; allow unit to cool, and expect residual water in the lines or pan
• Note hose routing and wiring connections; transfer any clamps, grommets, or fittings from the old pump if reused
• Ensure hoses are fully seated and not kinked; tighten connections and check for leaks after reassembly
• Test operation after installation and water is expelled properly

This overfill float and shaft assembly monitors the dishwasher's water level. As the tub fills, the float rises and triggers the float switch to shut off the inlet water, helping prevent overfilling and leaks.

• Senses tub water level and moves up/down with the water
• Activates the float switch to stop filling at the correct level
• Helps protect against overfill-related leaks
• Common symptoms include: won't fill (float stuck up), continuous filling/overfilling (float stuck down or damaged), or float not moving freely

• Disconnect power and turn off the water supply before servicing
• Lift the old float straight up from inside the tub; access the underside (behind the toe panel) as needed to release the shaft from the float switch lever
• Install the new shaft through the guide and onto the switch lever; seat the float so it moves freely
• Verify smooth float movement and test a fill cycle while checking for leaks

Included with nut.

The Water Inlet System is an OEM component specifically designed for select Bosch dishwashers. Comprising inlet valve, screens, hoses, and connectors, it precisely meters fresh water. Reliable flow prevents mineral buildups from impairing performance.

Causes of a bad water inlet system commonly involve bursting hoses or stripped connectors. Prolonged pressure weakens seals requiring timely replacement.

Symptoms of a faulty water inlet system include: 

- Fluctuating or absent water flow to spray arms
- Leaks forming inside or near the installation site
- Errors relating to improper water temperature or amounts  

Causes of a bad water inlet system involve typical degradation such as:

• Limescale clogging narrow valve openings
• Plumbing joint corrosion compromising integrity
• Splitting plastic tubing unable to withstand cycles

This OEM Bosch part is also compatible with some Miele, Blomberg, and Thermador dishwashers.