General Electric Blower Wheel Or Fan Blade

This replacement fan blade restores proper airflow inside your microwave, helping cool internal components so the unit runs reliably and quietly. A worn or damaged blade can reduce ventilation and lead to noise or overheating during operation.

• Circulates air to help cool internal parts and maintain proper airflow
• Helps reduce humming, rattling, or scraping noises from a damaged or unbalanced fan
• Can address weak or no airflow from the fan area
• May help prevent overheating or thermal shutdowns caused by poor circulation

• Disconnect power to the microwave before servicing to avoid electrical shock
• Access the fan area; remove grille/panels as required
• Note blade orientation; transfer any clips, spacers, or hardware from the original
• After installation, spin the blade by hand to ensure free movement before restoring power

This axial flow fan moves air through the appliance to help cool internal components and support proper airflow. Replacing a worn or damaged fan restores quiet operation and helps prevent overheating-related issues. What it does:

• Circulates air across internal components or heat exchangers to maintain proper operating temperatures
• Helps prevent overheating of electronics, motors, or heating elements
• Reduces abnormal noise caused by worn or imbalanced fan blades or bearings
• Supports consistent airflow for reliable appliance performance

• One axial flow fan assembly

• Disconnect power to the appliance before starting any repair
• Handle the fan blades carefully to avoid damage; align properly during installation
• Verify secure mounting and electrical connections before restoring power
• Test appliance operation after installation and observe for proper airflow and quiet operation

This evaporator blower fan blade circulates cold air through the refrigerator to maintain even cooling and proper frost control. Replacing a worn or broken blade restores airflow and helps the appliance cool more consistently. What it does:

• Spins on the evaporator motor to move air across the evaporator coils
• Promotes even temperature distribution inside the fresh-food and freezer compartments
• Helps prevent frost build-up by maintaining steady airflow
• Commonly replaced when airflow is weak, the fan is noisy, or the blade is cracked or broken

• One fan blade

• Disconnect power before accessing the evaporator/fan area to avoid shock or injury
• Handle the blade carefully to avoid bending fins or damaging the motor shaft
• The motor shaft and mounting hardware are intact before installation

This axial flow fan circulates air inside the appliance to help cool components and maintain proper ventilation. It replaces a worn or damaged blower wheel to restore airflow and reduce overheating risk. What it does:

• Moves air across coils or internal components to support cooling and ventilation.
• Helps prevent overheating and supports consistent appliance performance.
• Can reduce unusual temperature-related symptoms or poor cooling/airflow.
• Fits into the appliance's blower/motor assembly to restore proper airflow.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blades carefully to avoid bending or damage.
• Verify proper seating on the motor shaft and secure fasteners per the appliance's service instructions.

A complete fan assembly that restores airflow to the appliance to help maintain proper cooling and component ventilation. Installs as a direct replacement for the original fan assembly. What it does:

• Circulates air across coils and components to support proper cooling and temperature control
• Helps prevent frost or ice buildup by maintaining consistent airflow in refrigeration systems
• Replaces a failed or noisy fan motor that causes reduced airflow or unusual sounds
• Restores normal ventilation when a damaged blade or assembly disrupts air movement

• Always disconnect power to the appliance before starting any repair
• Handle the fan blades and motor housing carefully to avoid bending blades or damaging wiring
• Verify mounting orientation and connector fit before finalizing installation
• Test the assembly after installation to ensure proper operation

This stirrer assembly circulates microwave energy inside the cavity so food heats more evenly and prevents cold spots. It replaces a damaged or noisy stirrer that can cause uneven cooking or unusual microwave noise. What it does:

• Spins the microwave stirrer to help distribute microwave energy for more even heating
• Reduces hotspots and cold spots during cooking
• Stops or reduces rattling, grinding, or squealing noises when the original stirrer is worn
• Helps prevent arcing or sparking caused by a cracked or broken stirrer cover

• Disconnect power at the breaker or unplug the appliance before servicing to avoid electrical shock.
• Access may require removing the microwave's outer cabinet or control panel; follow OEM service manual steps.
• Handle the stirrer and cover carefully—plastic parts can crack if forced.

This evaporator fan motor and blade assembly circulates cold air through the refrigerator compartment to help maintain even temperatures and proper cooling. Replaces a worn or noisy fan to restore airflow and reduce frost buildup. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator and into the fresh food and freezer sections
• Helps maintain consistent internal temperatures and efficient cooling
• Can reduce unusual noise or vibration when a failing motor or bent blade is replaced
• Stops refrigerator frost buildup caused by poor circulation

• Disconnect power before accessing the evaporator compartment and handling electrical connections
• Handle the fan blade carefully to avoid bending; ensure blade clears shroud and is seated on motor shaft
• Reinstall any access panels and seals to maintain proper airflow and defrost function

This stirrer assembly circulates microwave energy inside the oven cavity to promote even cooking and reduce hot spots. It replaces a worn or damaged stirrer to restore consistent heating and quieter operation. What it does:

• Rotates to scatter and distribute microwave energy for more uniform cooking and reheating
• Helps reduce unevenly cooked food and cold spots when functioning properly
• Stops wobbling, binding or noise caused by a cracked or broken stirrer
• Prevents potential arcing from damaged components behind the waveguide cover

• One stirrer assembly

• Disconnect power at the wall or circuit breaker before inspecting or replacing the stirrer
• Access usually requires removing the microwave cavity grille or interior waveguide cover; keep fasteners and hardware for reassembly
• Handle the stirrer and waveguide area carefully to avoid damaging the magnetron or waveguide seal