Hose Or Tube

• Leaking

Changed the Frigidaire Icemaker Fill Tube Part # 241796405 (AP5671747) about a week ago and so far the Frigidaire Refrigerator seems to work fine. Did not use other ordered parts. Recently ice formed around internal evaporator fan and it started making loud noise when then fan and compressor, etc were running. A long winded history noted below if interested: I have been fighting with this Frigidaire Refrigerator for about 3 to 4 years, started out with the evaporator fan making noise when ice... Read more

Took the old part off and fitted the new one. I used the old plastic ball from the old hose and it worked fine. Next time I would replace the original clamp with a 4 inch hose clamp. The original clamp is way tooooooooooo hard to put back on....with a different clip it would be a 10 minute job at most. Read more

Upon cleaning my washer filter, I noticed that the hoses were very dirty. Instead of trying to clean, I decided to purchase new ones. Good price and fit perfect. Thanks Read more

Removed the old tube. You will need this part - note that it might look different from what you have because they redesigned the part to not have a sharp curve at the bottom part where it plugs into the valve. You will also need a 5/8" stainless steel hose clamp (that will go down to 1/4") to clamp the top part of the hose that feeds into the icemaker (this replaces the factory clamp that is effectively throw-away). Read more

Seems like a poor design-hose developed a leak from rubbing on the support pad beneath it. Pretty easy fix if you follow one of the instructional videos online as far as how to get the front panel off of the washer. You can't change this part from the rear access panel. My washer and dryer are stacked so it added some time to the job. Read more

I searched for parts on the internet regarding the make and model of my washer. Appliance Parts Pros not only had the part on a very user friendly website, but also had a well done video that made fixing the problem a breeze. Much appreciated and will buy from here from now on. Highly recommend! My local parts store did not have the part and would have to order it anyway. Read more

I got on appliance parts pros website, looked up my model number. Using their diagrams I found my part. Ordered it and replaced it, just like the new one. Read more

Replaced hose that came with the new washer with this longer one. Read more

REPLACED WITH YOUR MODULE. ARRIVED AS PROMISED & SAME AS OLD ONE. THANKS Read more

Followed the instructional video on how to replace water pump. Also, as a back up measure we replaced the drain hose assembly thinking this may have been clogged with fabric softener residue. A success and wash machine works like it is brand new! No more fabric softener in this house again. Read more

Found the correct USA made OEM part from Appliance Pros, and installed it on my new Dishwasher. The use of this correctly manufactured Adapter prevented any damage to the threads of the dishwashers inlet solenoid valve which is made of a plastic material. If I had forced the after market adapter onto the solenoid valve instead of ordering the OEM adapter; it would have ruined the threads on the plastic solenoid valve resulting in the need to purchase a very expensive replacement valve. ... Read more

Ordered Siphon Break Kit. Speedy shipping, thank you. Attached video shows how to remove front of washer to access screws to loosen top of washer to access siphon break from inside washer cabinet. http://www.do-it-yourself-washing-machine-and-dryer-repair-help.com/siphon-break-Maytagwasher.html Read more

Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread. Six pointers. 1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is... Read more

Removed the drain tube and put in a new drain tube. Read more

Replace injector. Placing liquid soap on the injector cover help insert the assembly into the hose. Read more

All this occurred after our utility had to cut off our water for 2-3 hours. We almost ordered a new ice maker, but thankfully someone had their repair story posted. Based on that story, we ordered a new ice maker supply line and a new water inlet valve for our Kitchen Aid refrigerator. After turning off the water to the refrigerator we noticed that the water supply line had almost burst right above the ice maker, so we thawed that out with a hair dryer, then replaced that line first. Removed... Read more