Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Switch

Range Oven Door Light Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316445500

Oven light stays on or won't turn on when door opens? This door-activated switch restores automatic light control. Easy 15-minute DIY repair.

Do-It-Yourself Stories from Customers like You Oven door wouldn't lock & oven light stayed on   Michael B. • Dubois , PA • November 26, 2015

Replaced light switch Read more

More
$52.68
Compare At:
$63.22
You Save:
$10.54

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Infinite Switch
Genuine Ge part
By: Ge
Part Number: WB24T10011

Burner stuck on high or won't heat properly? This infinite switch controls temperature settings. Common fix for dual burners that won't adjust heat levels.

More
$78.95
Compare At:
$94.74
You Save:
$15.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Cooktop Dual Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74008248

Burner won't heat or dual-ring stops working? This dual infinite switch restores power control to both circuits of your cooktop element. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You I was hanging a light above the cooktop and put my foot on the edge of the glass and my wife heard the glass snap   Robert C. • Lyman , WY • February 04, 2017

I looked up the parts on appliancepartspros.com, made the order, and was amazed how fast the parts arrived! I was able to watch their repair video and it showed me how to change it step by step. Read more

More
$63.65
Compare At:
$81.36
You Save:
$17.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Surface Element Control
Genuine Ge part
By: Ge
Part Number: WB23M9

This infinite switch controls the heat level of your range's surface cooking elements. It regulates power flow to provide different temperature settings from low simmer to high heat. Replace this part if a burner won't heat up, stays on high heat, or cycles on and off irregularly.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Element temperature would only work on high and there was no adjustment to the heat   Joann S. • Lennox , SD • October 26, 2015

Ordered the element control for my dual front right burner and a infinite heat switch for my left front large single burner. Removed cooktop and followed the instructions video given with the parts online. Process was simple and everything on my cooktop is working like it is brand new. The only problem I have is with the online chat, save time by calling in and talking to someone as the people I talked to online (4 of them) are in such a hurry to get to the next call they gave conflicting part... Read more

More
$113.95
Compare At:
$135.60
You Save:
$21.65

IN STOCK
Ships Today Guaranteed
Add to Cart
Element Control
Genuine Ge part
By: Ge
Part Number: WB23M8

1200W Element Control

Do-It-Yourself Stories from Customers like You The element control had to be replaced   Avi E. • West Hartford , CT • April 06, 2014

I took the cook top of its support disconnected the electricity took the part off the panel and replaced the faulty control. Read more

More
$112.45
Compare At:
$134.94
You Save:
$22.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011243

Burner stuck on high or won't heat? The infinite switch controls surface element power from low to high. Common DIY fix restores heat adjustment.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You No control of range burner burner was either off or on high no heat adjustment   Robert B. • Toms River , NJ • September 06, 2014

Replaced infinite switch Read more

More
$73.95
Compare At:
$87.26
You Save:
$13.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Electric Range Surface Burner Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10295048

If your electric range burner won't heat properly or won't turn off, this infinite switch controls power to the surface element. Moderate DIY repair.

More
$84.95
Compare At:
$101.94
You Save:
$16.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Plunger Switch (Push-Type)
Genuine Ge part
By: Ge
Part Number: WB24K10068

This plunger switch is the push-style electrical switch that completes a circuit when an actuator is depressed, restoring reliable on/off signaling. Use it to replace a worn or broken plunger switch that causes intermittent or non-responsive operation. What it does:

  • Closes an electrical circuit when the plunger is pushed, sending a signal to the appliance control.
  • Commonly used where a door, lever or dispenser actuator must register a position or user input.
  • Can correct symptoms like intermittent operation, a dispenser or mechanism that won't activate, or a stuck/unresponsive actuator.
  • Acts as a direct mechanical-to-electrical interface—no electronics required.
What's included: One plunger switch. Install notes:
  • Disconnect power (unplug or turn off breaker) before servicing to avoid shock.
  • Remove the access panel or housing to reach the switch; note actuator orientation before removal.
  • Disconnect terminals or harness, then swap the old switch for the new one; reconnect terminals securely.
  • Test the plunger action and appliance function before reinstalling panels.

Do-It-Yourself Stories from Customers like You Light was stuck on because switch was bad   Brian F. • Clinton , NY • October 10, 2015

I pulled the switch out of the oven console and wiggled it until it started working. That only worked for a few days. I ordered the new switch from AppliancePartsPros on Monday. In the mean time, I pulled the switch off and held the wiring harness in place with duct tape. This turned off the light. Two days later, I plugged in the replacement switch, pushed it into the console and the rest is history! Thank you AppliancePartsPros! Read more

More
$14.95
Compare At:
$17.64
You Save:
$2.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Blower Speed Switch (Selector)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4456836

This blower speed switch lets you select the blower/fan speed to restore proper airflow control in your appliance. It replaces a worn or faulty speed selector so the blower will respond correctly when you change settings. What it does:

  • Controls the blower/fan speed so the appliance can run at selectable airflow levels
  • Replaces a switch that is stuck, unresponsive, or only running at one speed
  • Restores reliable electrical connection between the control circuit and blower motor
  • Helps eliminate intermittent fan operation or loss of speed selection
What's included: One blower speed switch Install notes:
  • Disconnect power to the appliance before starting any repair.
  • Verify wiring placement and retain original fasteners; wiring diagram for correct connections.
  • Handle terminals carefully to avoid bending or damaging contacts.

Do-It-Yourself Stories from Customers like You Broken fan switch on my kitchenaid electric cooktop   Joseph H. • Winter Haven , FL • May 12, 2014

Went on line to find the part number. Once I had the number I searched for the part. Found it, had it shipped overnight and installed it with the help of a video from youtube. Read more

More
$120.56
Compare At:
$143.47
You Save:
$22.91

IN STOCK
Ships Today Guaranteed
Add to Cart
Wiring Harness (Range/Oven)
Genuine Frigidaire part
By: Frigidaire
Part Number: 316219019

This wiring harness routes power and control signals between key components inside your range or wall oven. Replace a damaged harness to restore safe, reliable operation and prevent intermittent heat, shorts, or non-working burners and oven functions.

  • Distributes electrical power and signals between controls, switches, heating elements/igniters, and safety components
  • Maintains correct connector orientation and wire routing for dependable operation
  • Typical symptoms: no heat in oven or on surface burners, intermittent operation, breaker tripping, or visible burnt/melted wiring
  • Restores stable connections to reduce arcing and overheating
What's included: One wiring harness assembly. Install notes:
  • Disconnect power at the circuit breaker; for gas ranges, also shut off the gas supply
  • Label or photograph all connections and transfer one wire at a time to avoid miswiring
  • Route the harness exactly as original; keep away from sharp edges and hot surfaces; secure with existing clips/ties
  • If connectors don't match or any terminals are heat-damaged, stop and inspect mating components.

Do-It-Yourself Stories from Customers like You One of the burners wasn't doing the ignition   Juan Carlos A. • Brooklyn , NY • October 30, 2016

Replaced the wiring harness Read more

More
$65.74
Compare At:
$77.57
You Save:
$11.83

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Burner Control Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316498603

Burner won't heat or stays on constantly? This range burner control switch regulates cooktop element temperature. Straightforward DIY fix.

Do-It-Yourself Stories from Customers like You The burner control switch was broken!   Rinuan W. • San Francisco , CA • November 19, 2024

I ordered a new one and replaced it! Read more

More
$60.66
Compare At:
$72.79
You Save:
$12.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Burner Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: 8203536

Burner stuck on high or dual element not working? This infinite switch controls heat levels. Moderate DIY; transfer wires one at a time carefully.

Do-It-Yourself Stories from Customers like You The "infinite switch control" failed on the 1000/2400 watt dual element burner causing both elements to turn on when single was selected   Eddie K. • Edmonds , WA • March 18, 2016

Turned OFF the CIRCUIT BREAKER for the RANGE at home electric control panel. Checked RANGE to verify power to entire RANGE was OFF by observing that control panel and OVEN lights were OFF and no burner operation. Covered GLASS COOKTOP of range with cardboard or other protective material to avoid accidental breakage during repair. Removed knob from infinite control switch by firmly pulling UP. Carefully removed switch retaining nut and insulating washer, by using an adjustable wrench. Removed... Read more

More
$103.95
Compare At:
$125.28
You Save:
$21.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293820

Fix a burner stuck on high or not heating with this surface element switch. Controls power to your cooktop heating element. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Large burners would go to high when turned on   Charles H. • Prestonsburg , KY • October 25, 2016

Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days... Read more

More
$64.70
Compare At:
$77.64
You Save:
$12.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Infinite Switch Top Burner Control Switch
Genuine Ge part
By: Ge
Part Number: WB23K34829

The Infinite Switch is an OEM part for GE electric ranges. It regulates precise temperature settings for the bake and surface elements.  This is specifically for 6" inch elements.

Symptoms of a bad infinite switch include:

  • Wide variations in cooking temperatures 
  • Failure to attain or maintain desired heat levels
  • Non-working or faulty temperature selector dial 

Causes can involve degraded metal contacts, worn internal components, or damaged wiring connections after extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore electric range models. 

Do-It-Yourself Stories from Customers like You The red "burner on" signal light was on when all switches were turned off 3 of the 4 burners would heat up but one 8 inch burner would not heat and inspection showed a burned switch easy repair   Harley W. • Holt , MO • January 10, 2015

Replaced the switch. Read more

More
$57.95
Compare At:
$68.96
You Save:
$11.01

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Oven Control Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 808136601

Oven not responding to buttons or features won't activate? This control switch restores reliable operation by opening and closing electrical circuits.

Do-It-Yourself Stories from Customers like You Oven light would never turn off.   Raul R. • Northlake , IL • March 15, 2018

Bought a door light switch from your company and used it to replace the bad one from my stove. Read more

More
$46.35
Compare At:
$54.69
You Save:
$8.34

IN STOCK
Ships Today Guaranteed
Add to Cart
Cooktop Dual Element Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215034

Fixes dual burner stuck on high, won't heat, or no inner ring control. This infinite switch restores precise temperature selection. 45-60 minute DIY repair.

Do-It-Yourself Stories from Customers like You Burner didn't turn on   Bruce H. • Granger , IN • August 18, 2015

I replaced both the element and the switch. It was a relatively easy fix, although I needed a second set of hands to hold the stovetop upright while I did the replacement. The entire job took about 45-60 minutes. Read more

More
$160.95
Compare At:
$192.52
You Save:
$31.57

IN STOCK
Ships Today Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store