Lg Parts

The Lint Filter Assembly is an OEM part for LG dryers. It is responsible for trapping lint and debris that come off clothes during the drying cycle, preventing these particles from clogging the dryer vent and ensuring efficient airflow.

Causes of a bad lint filter can include wear and tear over time, damage due to excessive heat, or physical damage from mishandling. Additionally, neglecting regular cleaning can lead to buildup that impairs its effectiveness.

Symptoms of a bad lint filter include:

• Longer drying times
• Excessive lint buildup inside the dryer
• Clothes not drying properly
• The filter being cracked or torn

This OEM LG part is also compatible with Sears/Kenmore models.

The Outer Door Seal is an OEM replacement part for LG dishwasher doors. Situated around the door opening, it creates a tight seal when closed to contain moisture, heat, and germs within the wash chamber. Proper door sealing is essential for sanitization, drying performance, and protection of surrounding cabinetry.

Causes can be deterioration of sealing material over extended use, cracks or deformities allowing passage of water and air, or damage from closing force on the rigid door.

Symptoms of a bad seal include:

• Visible leaks and water damage around the door interior and exterior
• Door failing to seal fully shut
• Musty odors escaping from uncontained air inside

This OEM LG part is also compatible with some Sears/Kenmore dishwashers.

This safety interlock assembly secures the washer door and signals the control when it's safe to run a cycle. Replacing a faulty unit helps restore proper locking and start functions to prevent interruptions and error codes.

• Locks the washer door and confirms it is closed to allow the cycle to start
• Sends door-closed/locked status to the control throughout the cycle
• Helps prevent the door from opening during spin or when water is present
• Common symptoms: won't start, won't lock/unlock, door error (dE) messages, cycle stops mid-wash

• Disconnect power before servicing; wear cut-resistant gloves
• Access the lock at the door opening; remove the mounting screws and disconnect the harness
• Transfer connectors to the new assembly, align, and secure without overtightening
• Ensure the door strike aligns smoothly with the new lock before testing

The Compressor Overload Protector Assembly is an OEM part for LG refrigerators. The compressor overload protector steps in if the compressor motor draws excessive current. It then interrupts the power to prevent overheating. The wire harness boosts the compressor to kick-start it, disengaging as soon as the motor reaches the desired speed.

Over time, the compressor overload protector can wear out or become damaged due to electrical issues, power surges, or constant exposure to high temperatures. A faulty protector can compromise the safety and efficiency of the refrigerator’s cooling system.

Symptoms of a bad compressor overload protector assembly include:

• The refrigerator not cooling properly
• The compressor frequently cycling on and off
• Clicking noises coming from the compressor area
• The refrigerator not turning on at all

This OEM LG part is also compatible with Sears/Kenmore models.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators, designed to replace or upgrade the ice-making capabilities of your appliance. This assembly kit includes all necessary components for ice production, ensuring your refrigerator can generate ice efficiently and reliably.

Causes of issues with the ice maker assembly often stem from water line problems, such as clogs or freezing, or mechanical failures within the ice maker itself, including faulty electrical connections or worn-out mechanical components.

Symptoms of a failing ice maker assembly can include:

• Inability to produce ice
• Producing smaller or malformed ice cubes
• Ice maker making unusual noises during operation
• Leaks around the ice maker area

This OEM LG part is also compatible with some Kenmore models.

The Light Bulb is an OEM part for LG microwaves. It provides illumination inside the microwave oven, allowing users to monitor the cooking process and check the condition of the food without opening the door.

Causes of a bad light bulb can include normal wear and tear, electrical surges, or damage due to impact or overheating. Over time, the filament inside the bulb can burn out, or the bulb itself can become loose or disconnected.

Symptoms of a bad light bulb include:

• The microwave interior light not turning on
• Flickering or dimming of the light
• Intermittent lighting during operation

This OEM LG part is also compatible with Sears/Kenmore models.

The Freezer Defrost Heater is an OEM part for LG refrigerators. It plays a crucial role in the defrost system by melting any frost or ice buildup on the evaporator coils. This helps maintain the efficiency of the cooling system and ensures the freezer operates properly.

Over time, the defrost heater can wear out or fail due to continuous heating and cooling cycles, electrical issues, or physical damage. Causes of a bad defrost heater include burnouts, electrical faults, and accumulation of frost that hinders its functionality.

Symptoms of a bad freezer defrost heater include:

• Excessive frost buildup in the freezer
• The freezer not maintaining the set temperature
• The refrigerator running continuously or cycling more frequently
• Water leaks inside the freezer from melting ice

This OEM LG part is also compatible with Sears/Kenmore models.

The Ice Maker Assembly is an OEM component specifically designed for LG refrigerators. It is responsible for automatically producing batches of ice cubes through an electrical freezing process.

Causes of a bad ice maker assembly can include failures in the electrical components, freezing properties deteriorating over time, or physical damage to the assembly housing. 

Symptoms of a bad ice maker assembly include:

• No ice production or very slow icemaking  
• Cubes that are improperly formed or jammed inside the unit
• Error codes displayed related to the icemaker
• Leaking or water issues around the assembly area

This LG part is also compatible with Sears/Kenmore models utilizing the same refrigerator chassis and components.

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment. 

Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter. 

Symptoms of a bad Noise Filter Assembly include:

• Increased electrical noise or buzzing sounds emanating from the washer
• Intermittent disruptions in the washer's performance
• The washing machine failing to start or experiencing power fluctuations

This OEM LG part is also compatible with some Kenmore models.

The Pump Casing is an OEM replacement part for LG top-load washing machines. This casing houses the water pump, providing a protective enclosure that shields the pump from debris and external factors. The casing is designed to fit snugly around the pump, helping to maintain its position and function within the washing machine.

Causes of casing failure can include cracks or leaks from repetitive pressure fluctuations exerted during machine operation. Casings experience extensive mechanical stresses.

Symptoms of a compromised casing include:

• Water leaks near or below the pump assembly
• Noisy or grinding pump noises during water fills or drainage
• Error codes related to water flow issues

This casing fits LG top load models as well as some Kenmore configurations. 

The Rotor Assembly is an OEM part for LG washing machines. This component is critical for the proper functioning of the washer's motor, helping to rotate the drum during the wash and spin cycles. It works in conjunction with the stator to generate the necessary magnetic fields for drum rotation.

Causes of a bad rotor assembly can include excessive wear over time, exposure to heavy loads, or physical damage due to mishandling. A malfunctioning rotor assembly can hinder the washer’s ability to spin and agitate effectively.

Symptoms of a bad rotor assembly include:

• The drum not spinning or agitating properly
• Unusual noises such as grinding or clunking during operation
• Error codes related to motor issues displayed on the control panel
• The washer not completing wash cycles correctly

This OEM LG part is also compatible with Sears/Kenmore models.

The Water Inlet Valve is an OEM part for LG refrigerators. It controls the flow of water into the refrigerator for the icemaker and water dispenser, ensuring a consistent supply for ice production and chilled water.

Common causes of failure include sediment buildup, electrical issues, or damage from freezing. A malfunctioning valve can disrupt the water supply, affecting both the icemaker and water dispenser functions.

Symptoms of a bad Water Inlet Valve include:

• No water or ice production
• Slow filling of the ice tray or water dispenser
• Leaks or puddles around the refrigerator
• Unusual noises when the water dispenser is activated

This OEM LG part is also compatible with Sears/Kenmore.

The Coupling Washer is a genuine OEM part for LG washing machines. As a crucial component connecting the drive motor to the inner drum, the coupling washer allows for the transmission of rotational force during the spin cycle. This rotational movement generated by the drive motor is what extracts water from clothing, effectively drying clothes. 

Symptoms of a bad coupling washer include:

• The washing machine fails to spin or rotates very slowly
• Vibrations and noise during spinning
• Rubber couplings tearing or shredding prematurely

Over time, the constant exposure to vibrations and forces during spin cycles can cause the rubber material of the coupling washer to deteriorate. 

This OEM LG part is also compatible with Sears/Kenmore washers.

The Motor, AC Fan is an OEM part for LG ovens. This fan motor is responsible for circulating air within the oven cavity, ensuring even heat distribution for consistent cooking and baking results. It helps maintain the oven’s temperature by moving hot air around, which is especially important for convection ovens.

Over time, the fan motor can wear out or become faulty due to continuous use, exposure to high temperatures, or electrical issues. When the fan motor fails, it can lead to uneven cooking and potential overheating of the oven.

Symptoms of a bad oven motor, AC fan include:

• Uneven cooking or baking results
• Unusual noises coming from the oven during operation
• The oven taking longer to preheat
• The fan not spinning or running intermittently
• Error codes related to fan or airflow issues

This OEM LG part is also compatible with Sears/Kenmore models.

The Holder is an OEM part for  LG dishwashers. It is a mounting bracket or clip located inside the dishwasher that securely holds racks, baskets and other accessories in place during wash cycles. The holder plays a supporting role, making sure dishes and utensils are stabilized for cleaning.

Causes of a bad holder typically include breakage or cracks in plastic mounting clips from repeated uses. Fatigue of metal brackets may also occur over time due to vibrations.

Symptoms of a bad holder can include:

• Accessories that no longer stay firmly fixed in position during the wash cycle
• Items may dislodge or racks may become loose

This LG part is also compatible with some Kenmore models.