Touch Pad

The Dispenser Module Cover is an OEM part for Frigidaire Refrigerator. It is the decorative plastic shroud that fits externally over the ice and water dispenser components.

Causes can be normal wear from frequent use of the dispenser, impacts from children or pets pressing on the area, or damage from attempted cleaning with improper chemicals over time.

Symptoms of a bad dispenser module cover include:

• Cracked, faded or stained external appearance
• Exposed wires and components vulnerable to liquid intrusion
• Cover not properly sitting flush or securely clipping into place

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models. 

This backsplash assembly with graphics replaces the rear control panel on compatible dryers. It restores a rigid mounting surface and clear cycle labeling for the timer and switches, improving appearance and helping the controls align and operate properly.

• Mounts and aligns the timer and switch controls on the console
• Provides printed cycle and option identifiers for accurate selection
• Helps resolve cracks, dents, broken tabs, or missing/illegible markings on the original panel
• Can reduce rattling or loose-feeling knobs when the old panel is damaged

• Disconnect power; turn off gas supply for gas models.
• Remove control knobs and console screws; lift off the old backsplash.
• Transfer the timer/switches and any brackets to the new panel; move connectors one at a time or photograph wiring for reference.
• Watch for sharp metal edges; avoid overtightening screws; control shafts are centered before reinstalling knobs.

Color: White.

This is the user-facing control panel for your appliance. Replacing a worn or damaged panel restores clear labeling and dependable button selection so you can choose cycles and options as intended. What it does:

• Provides the button interface to select cycles and options
• Sends user inputs to the appliance's control system
• Protects and finishes the console/door area
• Common symptoms: unresponsive or intermittent buttons, cracked or loose panel, worn or unreadable labels, stuck keys

• 1 control panel

• Disconnect power to the appliance before servicing
• Remove inner/console screws to release the old panel; note screw locations
• Carefully transfer any clips, brackets, or nameplates from the old panel
• Reconnect any ribbon cables/connectors straight and fully seated; avoid pinching during reassembly

Color: Black

Color: Black

Color: White

The Clock Plate is an OEM part for GE ranges. This part covers and protects the clock and timer mechanisms, providing a clean and organized appearance to the appliance's control panel.

Causes of a bad clock plate can include physical damage such as cracks or breaks, discoloration from heat exposure, or wear and tear from regular use.

Symptoms of a bad clock plate include:

• Cracks or visible damage
• Discoloration or yellowing
• Difficulty reading the clock or timer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a switch membrane, also known as a keypad, that is used with ovens, ranges, and stoves. The part is located in the center of the front of the appliance. It is made up of several layers and acts as a switch to turn the appliance on and off. It also includes several buttons so users can choose cooking settings, set temperatures, and otherwise alter the operation of the appliance.Regular use or damage can cause the switch membrane to become damaged. When this occurs, the buttons may not work correctly or there may be no way to turn the appliance on and off. If this is the case with a switch membrane, it should be replaced. Unplug the appliance and remove the screws from the back. Find the tabs on the side and press them to remove the housing. Remove the bottom screws to take off the ribbon connector. Remove the original part and replace it with the OEM replacement component.Created for compatibility with KitchenAid ranges, ovens, and stoves, the switch membrane is sold as a single part. This is an authentic OEM replacement component that is sourced straight from the manufacturer.

The Overlay is an OEM part for Frigidaire ranges. It provides the protective plastic face that interfaces with the electronic control buttons and display.

Causes of a bad overlay can include cracks or breaks from repeated cleaning, warping or discoloration from heat exposure over time, and physical damage from impact.

Symptoms of a bad control board overlay include:

• Non-responsive or inoperable control buttons
• Illegible or faded labels and display graphics
• Gaps or loose fit of the overlay allowing moisture ingress
• Premature wear reducing the overlay's protective function

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This control panel assembly replaces the white front console on your dryer. It restores a solid mounting surface for the timer, switches, or display so you can select cycles and settings with proper alignment and smooth operation. What it does

• Provides the front console housing for the dryer's user controls
• Keeps buttons/knobs and indicators aligned and protected
• Restores appearance after cracks, discoloration, or broken tabs
• Helpful when controls feel loose, are hard to press, or the console is rattling

• 1 white control panel assembly

• Disconnect power; if gas, shut off the gas supply before servicing
• Remove control knobs and any end caps; take out mounting screws/clips and lift off the old panel
• Transfer any brackets, light pipes, clips, and harness retainers from the old panel to the new as needed
• Reinstall and tighten fasteners; refit knobs and verify smooth control operation before restoring power

The Console Assembly is an OEM part for Frigidaire dishwashers. It houses the electronic controls, buttons, and touch screen panel which allow users to easily monitor dishwasher cycles and settings. The console assembly is crucial for selecting cleaning options, checking cycle status, and making any adjustments during a wash.

Causes of failure could be due to physical damage, spilled liquids causing corrosion of internal components, or just normal wear over extended use.

Symptoms of a bad console assembly include:

• No power to control functions or display
• Faulty or non-functional buttons that do not press
• Inability to start or stop dishwasher cycles
• Touch screen no longer detects input selection
• Error codes appearing without cycle initiation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replace the control panel to restore a clean, secure interface for selecting settings and protecting the controls. Ideal when the original panel is cracked, dented, loose, or its graphics are worn and hard to read.

• Provides the fascia that houses and aligns the keypad/display or control knobs
• Shields internal components from heat, spills, and impacts
• Restores proper button alignment and the appearance of the front console
• Common symptoms: cracked or broken panel, stripped or missing mounting tabs, peeling/illegible labels, loose or rattling console

• Disconnect power at the breaker before servicing
• Remove door/knobs/trim as needed; support the console while removing mounting screws
• Transfer any attached controls and hardware from the old panel to the new panel
• Handle sharp edges and do not overtighten fasteners to avoid damage

This console back cover assembly forms the rear housing of the dryer's control console. It supports the timer/controls and shields wiring so the control panel stays secure, aligned, and protected during everyday use.

• Forms the rear shell of the control console
• Provides mounting points for the timer/control board and switches
• Protects and routes console wiring away from heat and debris
• Helps keep knobs and buttons properly aligned and secured
• Common signs it's needed: cracked plastic, broken tabs, or a loose/rattling console

• Disconnect power to the dryer before servicing
• Remove top/console fasteners per your model's service instructions and support the console
• Transfer controls, brackets, and hardware from the old cover to the new one
• Reattach all retainers/ground screws before reassembly and test

This backsplash assembly is the rear console housing for a washer's controls. It supports and protects the user interface components and finishes the top, restoring a secure, aligned control area when the original panel is cracked or loose.

• Houses and supports the washer's control components and mounting hardware
• Shields wiring and controls from splashes at the rear of the top panel
• Restores proper fit and alignment for knobs, buttons, and overlays
• Common symptoms: cracked or broken console, loose or rattling controls, broken mounting tabs, cosmetic damage

• Disconnect power and, turn off water supply before servicing
• Remove control knobs and screws/clips securing the console; carefully lift the assembly
• Label or photograph wiring and transfer controls/mounting hardware to the new panel
• Reinstall, ensuring all tabs and screws are fully seated; watch for sharp edges

Color: Black

This overlay is the graphic label for the appliance's control panel. It restores clear button legends and a clean finish, replacing a worn, peeling, or damaged original so the controls are easy to read and use.

• Provides printed button labels and indicator marks for the user interface
• Helps shield the underlying touchpad/control board area from everyday wear
• Replace if text has worn off, film is peeling or bubbling, edges are cracked, or surface is sticky/discolored
• Common after replacing a touchpad/control panel, when graphics must match the new assembly

• Disconnect power before servicing to prevent accidental operation or shock
• Remove the control panel and old overlay; clean and dry the mounting surface
• Align the new overlay with buttons/indicators and apply evenly without wrinkles
• Reassemble and test the controls for proper operation