General Electric Accessories

This steam kit is the OEM steam generator assembly that supplies steam for steam-refresh and wrinkle-care cycles. It restores the appliance's ability to produce steam for improved fabric care and odor removal. What it does

• Heats and releases water as steam into the drum during steam cycles to help relax wrinkles and freshen clothes.
• Addresses weak or no-steam symptoms when the dryer runs steam cycles but garments remain untreated.
• Works with the appliance's control system to deliver steam only during designated cycle phases.
• Helps reduce the need for ironing by loosening fabric fibers during the cycle.

• One steam generator assembly (steam kit) as shown.

• Disconnect power before starting any repair to avoid shock or flooding.
• Suitable for technicians or experienced DIYers; follow the appliance service manual for disassembly and routing of water/steam lines.
• Inspect and replace any brittle or cracked tubing and seals to prevent leaks; test for proper steam delivery after installation.
• Do not operate the dryer with missing or damaged panels; ensure all connectors are secure.

The Door Removal Tool is an OEM replacement part for GE microwave ovens. It is a specialized tool designed to assist in the safe and proper removal of the microwave door. This tool is essential for servicing, repairing, or replacing components within the microwave cavity, ensuring that the door can be securely detached and reattached without causing any damage.

Symptoms of needing the Door Removal Tool include:

• Requirement to access the interior components of the microwave for repairs or maintenance
• Difficulty in removing the microwave door using conventional methods
• Potential risk of damaging the door or other components without the proper tool

Causes for needing the Door Removal Tool can vary, but it is typically required when performing tasks such as replacing the magnetron, waveguide cover, or other internal parts that necessitate door removal for access.

This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore microwave models.

This wire Wine & Beverage Rack replaces a damaged or missing shelf in wine and beverage refrigerators to securely hold bottles and maximize usable storage space. It restores proper bottle support and prevents shifting during use. What it does:

• Provides stable support for wine and beverage bottles so they store evenly and don't roll or tip.
• Restores proper spacing and organization inside the cooler or wine compartment.
• Helps prevent contact between bottles and interior surfaces that can cause chips or scratches.
• Fits into the cabinet's existing rails or brackets to recreate the original storage layout.

• One replacement wire wine & beverage rack

• Unplug the appliance or switch off power before reaching into the compartment.
• Slide the rack into the existing rails or brackets; no special tools usually required.
• Handle edges carefully; avoid forcing the rack into position to prevent damage.
• If original rails or clips are damaged, inspect and replace those mounting parts separately.

This Custom Cool tray is the refrigerator shelf insert that provides a flat, stable surface in the Custom Cool compartment and helps contain minor spills. It replaces a cracked, warped, or missing tray so refrigerated items sit level and clean. What it does:

• Provides a stable shelf surface in the refrigerator's Custom Cool compartment
• Helps contain small spills and prevents liquids from dripping onto lower compartments
• Restores proper fit and appearance when the original tray is cracked, warped, or broken
• Supports refrigerated items and small containers for safer storage

• One Custom Cool tray

• Disconnect power to the refrigerator before working on interior components
• Remove all items from the compartment and lift out the old tray; handle carefully to avoid cuts if cracked
• Align the replacement tray with the shelf guides and slide into place until fully seated
• Refer to the refrigerator owner's manual or manufacturer service instructions for model-specific guidance

This mounting bracket secures the dishwasher tub or inner components to the cabinet or frame, helping keep the appliance stable during cycles and preventing movement or misalignment. What it does:

• Provides a secure attachment point between the dishwasher and the cabinet or chassis
• Helps reduce rattling, shifting, and vibration during operation
• Keeps inner panels and assemblies aligned for proper door operation
• Supports correct positioning that can prevent wear on adjacent parts

• One dishwasher mounting bracket

• Intended for users comfortable with appliance repair; disconnect power and shut off water before starting
• Typical installation uses screws or clips—retain original fasteners unless replacement fasteners are specified
• Inspect surrounding mounting points and hardware; replace any damaged screws or tabs for a reliable fit

This replacement part is a snack dish cover, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. The snack dish cover is found in most refrigerators and is placed above any drawer to create another level of shelving. This allows the user to gain more space inside the appliance and store more things. A new snack dish cover might be needed if the current one is damaged including being chipped, broken, or cracked. It is possible for the dish cover to become brittle over time after being exposed to cold temperatures. If the dish cover has become discolored and is unable to be cleaned, it is also recommended that it be replaced. This is a simple repair and should only take a few minutes. After emptying the area, simply remove the old cover and replace it with a new one. This snack dish cover is sourced directly from the manufacturer. This is a genuine OEM replacement part and is sold individually.

This replacement rack can restores a damaged or missing support cup that helps hold and stabilize a refrigerator rack. It lets shelves sit level so stored items stay secure and the rack moves smoothly. What it does

• Supports a refrigerator shelf or rack pivot so the rack stays level and aligned.
• Replaces cracked, split, or missing support cups that allow racks to tilt or drop.
• Reduces rattling, binding, or uneven sliding caused by a failed rack support.
• Restores proper engagement with rack tracks or pivots for safe storage.

• One rack can (support cup) as pictured.

• Disconnect power (unplug or shut off breaker) before working inside the appliance.
• Remove the affected rack or shelf to access the support cup; installation typically snaps or presses into the rack/frame.
• Inspect mating surfaces for debris or damage; clean before installing the new cup for a secure fit.

This wire beverage rack provides a secure place on the refrigerator door to store cans and bottles, keeping drinks organized and easy to reach. It restores proper door storage and prevents items from falling or shifting. What it does:

• Replaces a broken, bent, or missing beverage rack to restore door storage
• Holds cans, bottles and other small drink containers securely on the door
• Stops rattling, sliding, or items falling when the door is opened or closed
• Keeps bottles and cans organized for easier access

• One wire beverage rack

• Designed to attach to the refrigerator door; orientation and clip locations may vary by model
• Remove any damaged rack or clips before installing the replacement
• Install by snapping into the door shelf clips or securing with the existing fasteners; do not force parts into place
• Unplug the appliance or disconnect power before working inside the refrigerator for safety