Heating Element

Burner won't heat or gets no power? This surface element supplies heat to your cooktop. Easy DIY fix—test for power at terminals first.

Restore reliable, even heat to a single cooking zone with this surface heating element. It replaces a failed top burner element on an electric range or cooktop so pots and pans heat consistently for everyday cooking. What it does:

• Supplies controlled heat to one cooktop burner zone
• Helps resolve: burner won't heat, intermittent heating, or very slow heat-up
• Can address uneven heating or visible damage to the element
• Replaces an open/failed element to restore normal cooking performance

What's included:

• 1 surface heating element

Install notes:

• Disconnect power at the breaker and allow the cooktop to cool completely before servicing
• Access the element per your model's service manual; support the cooktop if lifting a glass top
• Note wire locations and transfer connections one at a time to the new element
• Secure the element with existing brackets/clips as designed, then test operation before reassembly

Fix a cooktop burner heating only on inner or outer ring, or not heating at all. This dual radiant element restores both heating zones. DIY repair.

Range not broiling or browning food evenly? A failed broil element is the likely cause. This radiant heating coil restores strong, even heat for searing.

This replacement heating element restores consistent, reliable heat so your appliance reaches and maintains temperature as designed. A worn or open element can lead to long heat-up times or a complete loss of heat. What it does

• Converts electrical energy into heat for proper operation
• Helps the unit reach and hold the set temperature
• Common symptoms of a failed element: no heat, slow to heat, uneven heating, visible cracks/blisters, or tripping the circuit breaker

• 1 heating element

• Disconnect power at the breaker or unplug before servicing; allow the unit to cool completely
• Note wire positions and move connectors one at a time to the new element
• Secure all mounts and ensure terminals are fully seated with no loose connections
• After reassembly, restore power and monitor the first heating cycle

This is a 2500-watt circular heating element located at the rear wall of the oven cavity, surrounding the convection fan. It provides even heat distribution during convection baking and roasting by working in conjunction with the fan. Replace this element if your oven is not heating properly in convection mode, food is cooking unevenly, or the element is visibly damaged or broken.

The Surface Element is an OEM part for Frigidaire electric ranges and cooktops. It is the individual electric coil located beneath the cooktop that provides heat.

The surface element heats up rapidly upon activation in order to boil, simmer or saute foods efficiently. Its precise heating capabilities assist home cooks in meal preparation.

Causes can be mineral deposits caked onto the element surface over time reducing its ability to transfer heat properly. Excess moisture exposure can also damage internal wiring.

Symptoms of a bad surface element include:

• Burners that do not heat up at all or heat unevenly
• Lights flickering below an element when in use
• Popping, buzzing or crackling noises coming from below an element

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Bake element provides the oven's lower heating source so food cooks and browns properly; replacing a faulty element restores normal bake performance and addresses no-heat or uneven baking issues. What it does:

• Heats the oven cavity during bake cycles to deliver even cooking and browning.
• Replacing a failed element can correct no-heat conditions, undercooked food, or uneven baking.
• Visible damage like breaks, blistering, or exposed wires are signs the element needs replacement.
• Electrical symptoms such as a tripped breaker or burning smell can indicate a shorted element.

• Disconnect power at the breaker or unplug the appliance before beginning any repair.
• Allow the oven to cool and remove racks to access the element safely.
• Support the element while removing mounting screws and carefully disconnect terminals; avoid touching terminals with bare hands.
• Restore power and test the oven after installation.

The Dishwasher Heater Assembly ensures your dishwasher operates efficiently by providing consistent and reliable heating during each cycle. As a genuine OEM part, it guarantees perfect compatibility with a range of Samsung dishwasher models, allowing for seamless installation and optimal performance. This high-quality heater assembly enhances the drying process, ensuring your dishes come out spotless and dry every time. Designed for durability, the Dishwasher Heater Assembly helps extend the lifespan of your appliance by maintaining effective temperature control. Whether replacing a faulty heater or upgrading your dishwasher's functionality, this genuine OEM part offers the dependable performance you expect from your Samsung appliance. Enjoy improved efficiency and consistent results with the Dishwasher Heater Assembly , crafted to meet the highest standards for your kitchen needs.

This is the resistive coil heating element that generates heat inside the dryer drum to dry clothes. It is rated at 208 volts, which is commonly found in apartment or commercial installations rather than the standard 240-volt residential supply. Replace this element if the dryer runs but produces no heat, takes excessively long to dry clothes, or if the coil is visibly broken or damaged.

Burner not heating or heating unevenly? This 8-inch surface element restores reliable cooktop performance. Simple plug-in installation in minutes.

Dryer not heating or takes hours to dry? This 240V heating element assembly restores proper heat output. Common fix for no-heat issues. Moderate DIY repair.

Oven won't heat or maintain temperature? A failed bake element causes uneven cooking and long preheat times. This lower heating element restores consistent heat.

This is a triple radiant surface element used on glass-top electric ranges. It provides heat to the cooktop surface and typically features multiple heating zones for different pot sizes. Replace this element if your cooktop burner is not heating evenly, only partially heating, or not turning on at all.

This is a sheath-style heating element mounted at the top of the oven cavity that provides high, direct heat for broiling. It glows red when functioning properly and is responsible for searing and browning food from above. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

Dryer not heating or taking too long to dry? This heating element generates heat to dry clothes. Common repair for no heat issues in laundry centers.