Igniter

• No heat or not enough heat

Removed back panel of dryer. Pulled out part out of its clamp. Placed new igniter in clamp, then dried some clothes and it worked. Read more

Appliance pros had the part. Incredibly, we received it the next day. They sent a confirming e mail with general instructions on how to replace it. Worked like a charm! Our's is a Bosch unit. The retaining brass nut in the center of the burner is an odd size-20 mm which I did not have among my many automotive metric tools. The local Auto Zone though had a 20 mm socket. Once that was removed the procedure would have been a breeze except the retaining screw on the old igniter was frozen. ... Read more

• Little to no heat when baking
• Won't start
• Gas igniter glows, but will not light

I put in a new igniter. Very simple Read more

Ordered part at 4:33 on Friday and FedEx dropped it at my door at 9:35 Sat a.m. I did not pay for expedited shipping. I had trouble getting to the offending part as the illustration of the parts was less than desirable. i called the help line and the agent was very helpful with ideas to try as he was looking at the same illustration as I. I did finally figure out the correct way to access the part and once I removed the rusted screws, the repair took only 5 minutes even though I spun my... Read more

• Won't start

I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more

The burner lit when I used a lighter so figured it was electrical. There were only 2 electrical components so I first tried replacing the block terminal. This did it, very simple and saved $250 on a whole new unit. Read more

• Won't start

Of course, before disassembling anything, I unplugged and turned off the gas supply. To replace the spark electrode, I removed the drip pan/surface to gain access to the burner assemblies. Next, I unscrewed (with a 1/2" open-end wrench, I think) and disconnected the gas supply tubing from the burner assembly with the cracked electrode, and then unscrewed the assembly itself from the base surface. With the assembly detached, I flipped it over and removed the screw that secured the cracked... Read more

Had a repair person come into my home and he suggested a different ($200) part, labor would have been another $125. Seeing that it would cost almost $400 fix it, we were just going to buy a new oven. The next day, I called Appliancepartpros and spoke to someone from their support. I explained the symptoms and they suggested this $50 part and told me that I could return it, even if it didn't work. Figured I had nothing to lose. Based on the diagram they sent, I was able to fix the oven (I'm... Read more

Took apart the top of the stove and replaced ignitor Read more

We ordered a new ignitor and it came in two days just as promised. The only problem that we experienced was that the leads on the new ignitor were to short. We were able to find enough slack on the oven end to make it work. The oven is once again working great. The video was a little off on what need to be done to disconnect the ignitor. We actually had to flip the oven over to get to the bottom. We could not access the connector through the back. Read more

Checked the internet for a video on how to fix the igniter. I took the burner apart and replaced the igniter. It works perfectly! Read more

• Gas igniter glows, but will not light
• Won't start

I removed all the individual burners so I could lift the stainless cover to expose the igniter wires. I cleaned all the wire connections and the 4 good igniters and replaced the one bad igniter. Reassembly was easy and everything worked properly when done. Video of repair was helpful and all parts ordered were correct and shipped promptly and I will definitely use AppliancePartsPros again. Read more

• Won't start
• Gas igniter glows, but will not light
• Element will not heat

Accessed your online video on the probable problem and repair, ordered the replacement igniter then replaced it easily. Read more