Axle, Roller, Pulley Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240285
This planetary drip ring fits around a stand mixer's planetary assembly to cover the gap below the gearcase and help catch grease residue, restoring a clean, finished look where the beater hub meets the mixer head.
- Mounts at the base of the mixer head around the planetary housing
- Helps deflect incidental gearbox grease residue away from the bowl area
- Covers the seam between housing and planetary for a clean, finished appearance
- Replace if bent, cracked, loose, missing, or if you notice grease spotting beneath the planetary
What's included: One planetary drip ring. Install notes:
- Unplug the mixer and remove the bowl and attachments
- Gently pry off the old ring; clean the seating surface of debris or residue
- Align and press the new ring evenly until fully seated; avoid deforming the ring or striking the gearcase
- On some models, access may require lowering/removing the planetary
Note: This ring is a trim/deflector piece and not a fluid seal. Persistent oil leakage indicates separate gearcase service.
Do-It-Yourself Stories from Customers like You
Worm gear failure on my KitchenAid 5 qt "professional" lift bowl mixer. Edward B. • Mount Horeb , WI • January 24, 2020
This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros...
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Ge part
By: Ge
Part Number: WD30X22347
Roller and bracket assembly for dishwasher rack systems. Clips to the side of the rack to allow smooth sliding. Replace if broken, cracked, or worn.
Do-It-Yourself Stories from Customers like You
Broken parts Roger M. • Fryeburg , ME • November 23, 2024
Parts arrived sooner than expected and parts fit perfectly.
Very pleased with result.
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001108
Plastic push-on pulley that mounts on the washer motor shaft to drive the belt. Replace if cracked, melted, worn, or no longer grips the shaft securely.
Do-It-Yourself Stories from Customers like You
Motor pulley broke witch strest my drain pump and broke that burned my belt Vicki A. • Muskegon , MI • November 07, 2014
Acualy sounded and looked major but with a littel help with you tube the job only took 30 minutes. 3 bolts for the water pump pulley broken pulley poped off new one klick into place simple belt install good to go.
Parts saved me $40 and where here in only 2 days. I couldnt be happyer.
Read more
More
$24.68
- Compare At:
-
$29.37
- You Save:
-
$4.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240286-1
Color: White
Do-It-Yourself Stories from Customers like You
Planetary was damaged when one screw came lose and was shaved to bits Tom A. • Allentown , PA • November 09, 2014
Removed the old planetary and cleaned metal shavings from gears. Transferred the old axle/gear assembly onto the new planetary. Inserted the new (and expensive) screw for the main gear and torqued it very tight (as well as the original other four screws). Slid the new planetary gears together and re-inserted the holding pin. Tapped on the cover ring and was done.
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Samsung part
By: Samsung
Part Number: DD61-00222A
Holds the upper rack roller wheels in your dishwasher. Replace this assembly if the holder is cracked, broken, or missing to restore smooth rack gliding.
Do-It-Yourself Stories from Customers like You
Brokenand misssing rollers Anthony S. • Congers , NY • December 13, 2016
Purchase replacements. Removed old roller carrier from lower basket by pushing on retaining clips with butt of screw driver. Maybe necessary to use flat end to get it started coming off.
The site helped in locating the correct part number roller assembly for my model.
Read more
More
$14.39
- Compare At:
-
$15.83
- You Save:
-
$1.44
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002072
Secures rack rollers to the dishwasher rack edge for smooth sliding. Replace this strip if cracked, broken, or tabs are damaged to restore proper alignment.
Do-It-Yourself Stories from Customers like You
Wheel Mounting strip broke after the wheels had jumped the track. Gerald C. • Pittsburgh , PA • March 31, 2014
Bought new strip then found that both of the wheels had worn flats on them and had to purchase newwheels.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Ge part
By: Ge
Part Number: WD35X21039
Replace cracked or worn upper rack rollers that prevent smooth sliding. Kit includes studs and wheels for secure rack gliding. Fits GE dishwashers.
Do-It-Yourself Stories from Customers like You
Dishwasher top rack roller broken Timothy S. • Ossian , IN • May 31, 2015
Replaced roller as shown in appliance parts pros video. I am highly pleased again and with my exp experience with you. Parts are priced better than anywhere and the videos are the perfect for someone mechanically- challenged like I am.
Read more
More
$35.70
- Compare At:
-
$42.48
- You Save:
-
$6.78
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317933
Replace worn, broken, or missing lower rack rollers. This 4-pack includes white double roller attachments that snap onto your dishwasher's lower rack.
Do-It-Yourself Stories from Customers like You
Broken roller on lower dishwasher basket Linda H. • Conyers , GA • July 25, 2014
Popped the old rollers off and snapped on new ones.
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Ge part
By: Ge
Part Number: WH07X10019
Drive pulley mounts to the washer basket shaft and routes the belt from the motor. Replace if worn, cracked, loose, or showing play on the shaft.
Do-It-Yourself Stories from Customers like You
Clunking and grinding from the drive Scott R. • Onondaga , MI • August 14, 2015
Replaced the shaft & mode shifter assembly. Also replaced the pulley as it had taken some damage from the wobbling clutch dog. And replaced the tub seal since it's normally inaccessible with the shaft in place. This is an advanced repair that took a lot of time. Removing the tub nut took a 1 11/16" socket and a 700 ft-lb impact wrench and I had to hammer on the nut for several minutes to break it free of the tub. Disassembly of the washer is complete, and requires a lot of space for...
Read more
More
$48.29
- Compare At:
-
$57.47
- You Save:
-
$9.18
Genuine Whirlpool part
By: Whirlpool
Part Number: W10917062
This drive coupling connects the motor shaft to the blender jar. Replace if worn, stripped, or cracked to restore proper blade rotation and function.
Do-It-Yourself Stories from Customers like You
Drive coupler and coupling both on blender and blender jar, were chewed up by using hot stuff in blender. Which we should have not done. Joseph F. • Turnersville , NJ • October 11, 2018
Just ordered blender jar coupler and blender motor coupling and now works fine and like new.
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Ge part
By: Ge
Part Number: WH38X10018
Mounts on the transmission shaft to transfer motor power for agitation and spin. Replace if worn, cracked, or causing belt tracking issues.
Do-It-Yourself Stories from Customers like You
Transmission pulley gone bad John J. • San Diego , CA • December 03, 2019
By replacing it.
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507405
Replacement dishrack roller for dishwashers. Attaches to the sides of the rack to allow smooth gliding movement. Replace when cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Two front bottom rollers for the top rack were partly broken, and the rack kept coming off the rollers. George W. • Westminster: , MD • April 04, 2014
Unscrewed the old rollers one at a time, and screwed in the new ones. Couldn't have been simpler. Why did I put it off for so long?
Read more
More
$24.95
- Compare At:
-
$29.44
- You Save:
-
$4.49
Genuine Ge part
By: Ge
Part Number: WD12X10278
White dishwasher lower rack roller axle. Replaces broken or worn axles that cause wheels to fall off. Snap-in design for easy installation.
Do-It-Yourself Stories from Customers like You
Dishwasher rollers had worn down and some were melted since they fell off into the heating element so the lower shelf door was constantly off its track Kara O. • Cincinnati , OH • February 15, 2015
We purchased both the roller studs and new rollers for all of the slots on the lower rack. They came two days later and I was able to easily click them into place and the lower rack now rolls smoothly and securely. I only wish I hadn't lived with it in the broken stage as long as I did - such an easy and affordable fix.
Read more
More
$15.31
- Compare At:
-
$18.22
- You Save:
-
$2.91
Genuine Ge part
By: Ge
Part Number: WD12X332
Includes screws.
Do-It-Yourself Stories from Customers like You
Worn out rollers due to old age of dishwasher. Budi N. • Madison , WI • March 09, 2018
Replace all 8 of them with the ordered parts. No big deal. Your provided repair-video was a big help! Thanks!
Read more
More
$12.01
- Compare At:
-
$14.22
- You Save:
-
$2.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251051
Right Side. For left side use part number WPW10251050.
Do-It-Yourself Stories from Customers like You
Both adjusters were broken causing the basket to tilt downward as the it was extended in order to be loaded the more it was loaded the further it would tilt downward Mr M. • Reading , PA • June 18, 2016
I removed the basket, studied the old adjusters before removing them, and installed the new ones using some of the old parts(adjustment levers and the covers). adjusters work like a charm.. the only tool required was a screwdriver with removable torque bit.
Read more
More
$75.68
- Compare At:
-
$89.30
- You Save:
-
$13.62
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002106
Replacement roller wheel for dishwasher rack mounting strips. Installs on the rack assembly to help it glide smoothly along the tub tracks. Order when broken or worn.
Do-It-Yourself Stories from Customers like You
Upper rack of dishwasher was not pulling out smoothly Douglas L. • Bellaire , TX • March 03, 2015
Ordered new frame, wheels and SS slide for the bad side. Job was done in 10 minutes and the rack now works smoothly.
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39