Axle, Roller, Pulley Parts
Bestselling
Price High to Low
Price Low to High
By: Ge
Part Number: WE03X10008
Replacement drum support roller assembly for dryers. Supports and stabilizes the drum as it rotates. Replace if roller is loose, wobbly, or worn out.
Do-It-Yourself Stories from Customers like You
Squeaky dryer Jerry C. • New Orleans , LA • June 19, 2016
Order set of drum rollers. My dryer required four. As long as I was opening up the dryer, dryer, 10 years old, I wanted to replace all of them. Also ordered new belt for Sam reason. Found full manual online. Disassembled dryer, about 20 screws. Replaced rollers, although only one was squeaky. Put it all back together. Took about 3 hours.
Read more
More
$58.95
Compare At:
$70.15
You Save:
$11.20
By: Whirlpool
Part Number: WPW10580220
Replacement wheel for dishwasher upper rack assembly. Supports and guides smooth rack movement. Needed when original wheel is cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Needed new wheels. Casey G. • Ansonia , CT • December 13, 2020
Installed new wheels.
Read more
More
$34.75
Compare At:
$41.35
You Save:
$6.60
By: Ge
Part Number: WE49X28031
Idler bracket and bearing assembly mounts to the dryer base, supporting and tensioning the drum belt. Replace if bracket is cracked or bearing is worn.
Do-It-Yourself Stories from Customers like You
None Dennis B. • Carmel Hamlet , NY • January 15, 2018
Took dryer apart. Replaced roller, 45 minutes, done.
Read more
More
$56.77
Compare At:
$66.99
You Save:
$10.22
By: Whirlpool
Part Number: WP8268703
Replacement axle for dishwasher upper rack height adjustment mechanism. Needed when the axle is broken, cracked, or missing from the rack roller assembly.
Do-It-Yourself Stories from Customers like You
Screw on one of the roller on upper tray broke Tim J. • Bend , OR • December 28, 2014
Replaced complete roller- screw,wheel and axel. Easy job
Just recently I had to replace upper spray arm. I ordered assembly from you and was completely satisfied with your service and price, that was over 1/2 of what local appliance repair dealer wanted. Very satified with how to do video on this project
Read more
More
$6.95
Compare At:
$8.34
You Save:
$1.39
By: Ge
Part Number: WH01X10608
Secures the drive pulley to the motor shaft in your laundry center washer. Replace if stripped, missing, or loose to restore a solid pulley connection.
More
$75.22
Compare At:
$89.51
You Save:
$14.29
By: Whirlpool
Part Number: WP243368
Replace a worn, bent, or broken agitator shaft in your stand mixer. This shaft connects attachments to the planetary mechanism for proper operation.
Do-It-Yourself Stories from Customers like You
Dough tool was stuck on the shaft because of hardened dough James H. • Winterville , NC • June 07, 2021
Bought a new shaft and replaced the original shaft. I tried soaking the original shaft with the dough tool stuck on in boiling water and vinegar, but no luck. Dough was like cement. Dough was already hardened like cement, so the hot water didn't change the chemistry at this point.
Read more
More
$23.61
Compare At:
$27.86
You Save:
$4.25
By: Frigidaire
Part Number: 5304475625
Replacement wheel assembly for dishwasher racks. Snaps onto lower or upper rack to restore smooth gliding. Needed when wheels are broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Upper rack rotted Terrance B. • Lynbrook , NY • January 08, 2018
Replaced upper rack (it comes with wheel assembly). The only tricky part was removing spray bar from old rack.
Read more
More
$30.95
Compare At:
$36.83
You Save:
$5.88
By: Whirlpool
Part Number: WP8575897
Wheel mount assembly for dishwasher upper rack. Attaches to rack and glides along side rails. Replace when cracked, broken, or worn for smooth rolling.
Do-It-Yourself Stories from Customers like You
Upper rack in dishwasher guide wheel broke easy repair after watching video Frank F. • Jefferson Twp , PA • September 29, 2014
Replaced both wheels after watching your video. easy repair
Read more
More
$11.78
Compare At:
$14.14
You Save:
$2.36
By: Whirlpool
Part Number: WP8268785
Replacement wheel for dishwasher upper rack. Snaps onto rack tines to allow smooth gliding in and out. Replace when cracked, broken, or worn out.
Do-It-Yourself Stories from Customers like You
Broken dishrack wheel Ted M. • Lincoln , NE • May 29, 2016
This is the sixth or seventh time that I've relied on your firm. It was late Thursday night (10:30 local time) when I needed to order a replacement wheel; the part number I had from my manual did not match the one listed on your site. I hit the Chat link, not expecting to reach anyone that late in the day, but I received a response within three seconds. The young lady not only confirmed the proper part but entered the order while we "chatted". I did not request fast delivery but received the...
Read more
More
$26.95
Compare At:
$32.07
You Save:
$5.12
By: Ge
Part Number: WD30X22347
Roller and bracket assembly for dishwasher rack systems. Clips to the side of the rack to allow smooth sliding. Replace if broken, cracked, or worn.
Do-It-Yourself Stories from Customers like You
Broken parts Roger M. • Fryeburg , ME • November 23, 2024
Parts arrived sooner than expected and parts fit perfectly.
Very pleased with result.
Read more
More
$11.41
Compare At:
$13.69
You Save:
$2.28
By: Ge
Part Number: WD12X22801
Rack roller bracket with three wheels that mounts to the dishwasher rack and rides in the rail. Replace if bracket is damaged or wheels are cracked or worn.
More
$28.55
Compare At:
$33.97
You Save:
$5.42
By: Whirlpool
Part Number: WP3385088
Replacement dishwasher dishrack wheel installs on the upper or lower rack to restore smooth gliding. Replace worn, broken, or missing wheels to fix jamming.
Do-It-Yourself Stories from Customers like You
Upper tray roller failure Michael S. • Atascadero , CA • February 28, 2022
Ordered replacement parts and installed them. A lot less expensive than having a dealership fix it.
Read more
More
$12.95
Compare At:
$15.41
You Save:
$2.46
By: Whirlpool
Part Number: W10850374
Dishwasher rack wheel that attaches to the upper or lower rack for smooth gliding. Replace if worn, cracked, broken, or missing to restore rack stability.
Do-It-Yourself Stories from Customers like You
Both back wheels broke off their assemblies and basket was unstable. James M. • Ocala , FL • March 28, 2021
Removed and replaced wheel assemblies.
Read more
More
$47.41
Compare At:
$55.94
You Save:
$8.53
By: Whirlpool
Part Number: WPW10254909
Replacement wheel assembly for dishwasher upper rack. Installs on the rack rail to allow smooth gliding in and out. Replace if cracked or worn.
Do-It-Yourself Stories from Customers like You
Top rack wheel pulled out of support arm Paul J. • Spanish Fork , UT • January 18, 2016
Installed a new top rack wheel support arm. The repair took less than 5 minutes. I appreciated the repair video on how to remove old support arm and end cap.
Read more
More
$48.46
Compare At:
$57.18
You Save:
$8.72
By: Whirlpool
Part Number: WP240285
This planetary drip ring fits around a stand mixer's planetary assembly to cover the gap below the gearcase and help catch grease residue, restoring a clean, finished look where the beater hub meets the mixer head.
Mounts at the base of the mixer head around the planetary housing Helps deflect incidental gearbox grease residue away from the bowl area Covers the seam between housing and planetary for a clean, finished appearance Replace if bent, cracked, loose, missing, or if you notice grease spotting beneath the planetary What's included: One planetary drip ring. Install notes:
Unplug the mixer and remove the bowl and attachments Gently pry off the old ring; clean the seating surface of debris or residue Align and press the new ring evenly until fully seated; avoid deforming the ring or striking the gearcase On some models, access may require lowering/removing the planetary Note: This ring is a trim/deflector piece and not a fluid seal. Persistent oil leakage indicates separate gearcase service.
Do-It-Yourself Stories from Customers like You
Worm gear failure on my KitchenAid 5 qt "professional" lift bowl mixer. Edward B. • Mount Horeb , WI • January 24, 2020
This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros...
Read more
More
$13.95
Compare At:
$16.60
You Save:
$2.65
By: Ge
Part Number: WE12X81
Maintains belt tension for smooth drum rotation. Replace if the pulley is cracked, worn, or the nylon bushing is broken to restore proper operation.
Do-It-Yourself Stories from Customers like You
The dryer was squeaking loudly George V. • Weirton , WV • December 13, 2014
I replaced the drum bearing in the back and also the nylon sliders in the front. It rook some time but was not difficult. I took some extra time to thoroughly clean all the lint from the inside.
Read more
More
$21.69
Compare At:
$29.75
You Save:
$8.06