Need Help?
Call
This assembly includes the housing and door that enclose the lint screen filter compartment on the top or front of the dryer. It provides access to the lint filter for cleaning and keeps the filter securely in place during operation. Replace this part if the door is cracked, broken, won't stay closed, or if the housing is damaged and no longer holds the lint screen properly.
Open dryer door. Remove four Phillip head screws that hold lint assembly together. Two inside and two on the outside. There is also a hex head screw behind the front panel. To get at it I removed the four hex heads at bottom of front panel and four star head screws on left side of front panel. I was able to get at it by pulling the front panel out as much as possible and and reaching from the side with small quarter inch socket. Remove lint assembly, vacuum out everything and replace with new... Read more
White plastic cap that secures the water filter in place. Replace if cracked, broken, or missing to properly hold your refrigerator's filter cartridge.
Replaced with new one from your website. I love the website because it shows you how to fix your problem before you get started. I Read more
The Cap Cover is an OEM part for LG refrigerators. This cover is designed to protect and secure various components within the refrigerator, such as the water filter or other internal mechanisms. Its role is to ensure that these components are shielded from debris, moisture, and potential damage, maintaining the overall efficiency and cleanliness of the appliance.
Causes of a bad cap cover can include wear and tear over time, cracks or breaks from accidental impacts, or warping due to exposure to temperature fluctuations. Misalignment or improper installation can also contribute to the cap cover becoming damaged or ineffective.
Symptoms of a bad cap cover include:
This OEM LG part is also compatible with Sears/Kenmore.
Order your parts and they were installed that day. Parts were very reasonable price, but I thought shipping with excessive for the size parts sent. Read more
This is the outer cover that protects the electrical terminal block on the back of a dryer. It shields the power cord connection point from accidental contact and helps prevent dust or debris from reaching the wiring terminals. Replace this cover if it is cracked, broken, or missing to ensure safe operation and protect the electrical connections.
Replaced broken coupling with new coupling Read more
Protective cover that shields the rear power connection terminals on your dryer. Replace if cracked, broken, or missing to prevent lint buildup and accidental contact with electrical connections.
Cleaned and lubricated the motor and the small drum bearing, replaced the upper front bearing mount, slide pads and lower felt bearing pad and the light bulb. Read more
Protective cover shields internal wiring and electrical terminals in your dryer. Replace if cracked, broken, or missing to prevent accidental contact.
This is a cover assembly that fits over the water dispenser area on the front of the refrigerator. It protects the internal dispenser components and provides a finished appearance on the exterior of the door. Replace this cover if it is cracked, broken, discolored, or if it no longer snaps securely into place.
There was a little tiny black part inside of where the water comes out. I took a photo of that part, then I studied the tech specs for the make and model of my fridge for almost 2 hours until I found a part that looked very similar to my photo of the little black part. It was a limit switch. Sure enough, that was it!!! Water now dispenses, and even better, when you pull the glass away, the water stops coming out! Read more
This cover fits over the lint screen opening on the top or front of the dryer, serving as a protective grille that allows airflow while keeping the lint filter accessible. It snaps or screws into the dryer housing and helps direct air through the lint screen properly. Replace this part if it is cracked, broken, or missing, which can allow lint to bypass the filter and reduce drying efficiency.
Secures the water filter in its housing and provides a handhold for removal. Replace if cracked, broken, or missing to maintain a proper seal.
Using the videos and some dismantling of the unit, I was able to identify and order all the parts from this site. I cross-checked other sites and they were cheaper here. All the parts came within 48 hours and I was able to install them. The unit works like new now. thanks Read more
Bypass cap allows your refrigerator to dispense water without a filter installed. Replace when using external filtration or RO systems. Confirm fit with your model.
Replaced water reservoir and water valve assembly. This corrected both problems. Before attempting this repair I used the Appliance Parts Forum for info on how to make these repairs. I had no idea where the valve and reservoir were located before I started. It became a very easy repair thanks to AppliancePartsPro.com. Read more
Replaces the water filter in your refrigerator to bypass filtration. Installs in the filter housing to maintain water flow when a filter isn't needed.
Easy fix, just like replacing an old water filter. Read more
This is a small white plastic plug that fills the hinge sleeve hole on a refrigerator or freezer door. It covers unused hinge mounting holes to provide a clean, finished appearance, especially after reversing the door swing. Replace this plug if it has cracked, fallen out, or gone missing, leaving an exposed hole in the door.
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more
Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.
I opened the front cover (breaking the spear that holds it in place on the right hand side), easily removed the defective reservoir and replaced it with the new one. I also replaced the front cover with a new cover to make up for the broken spear. Took less than 10 minutes. Read more
Replaces a cracked, broken, or missing evaporator door flap in your refrigerator. Controls airflow from the evaporator to maintain stable temperatures.
Plastic cap that snaps over refrigerator door handle ends to cover mounting screws and finish the handle. Replaces lost, cracked, or broken caps.
I ordered replacement plugs. The order went smoothly and expeditiously Read more
Covers the detergent dispenser drawer opening on your washer. Replace this plastic cover if it's cracked, broken, or missing to restore a clean appearance.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.