Dispenser Parts

The Detergent Box Assembly is an OEM replacement part for LG washing machines. This assembly is responsible for holding and dispensing detergent and other laundry additives during the wash cycle. It ensures that the correct amounts of detergent, bleach, and fabric softener are released at the appropriate times, contributing to effective cleaning and care of your clothes.

Over time, the detergent box assembly can become worn out or damaged due to continuous exposure to water and detergent. Buildup of detergent residues can clog the compartments, and the mechanical parts of the assembly can also degrade. 

Symptoms of a bad detergent box assembly include:

• The detergent, bleach, or fabric softener not dispensing properly
• Visible cracks, warping, or damage to the box
• Residues remaining in the compartments after a wash cycle
• Leaks from the detergent box area
• Error messages related to dispensing issues

This OEM LG part is also compatible with some Sears/Kenmore washing machine models.

The Dispenser Assembly is an OEM part for Frigidaire refrigerators. It is responsible for dispensing water and ice from the refrigerator door, providing easy access to chilled water and ice cubes.

Causes of a bad dispenser assembly can include electrical issues, wear and tear over time, or physical damage to the dispenser mechanism or housing. Additionally, problems with the water inlet valve or ice maker can impact the dispenser's performance.

Symptoms of a bad dispenser assembly include:

• Water or ice not dispensing
• Leaks or drips from the dispenser area
• Inconsistent or no ice production
• Unresponsive dispenser controls

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dispenser Drawer Handle is an OEM part for Frigidaire washing machines. It is designed to provide a sturdy grip and easy access to the detergent dispenser drawer. It allows for the convenient adding of detergent, fabric softener, or bleach to the dispenser. 

A bad Dispenser Drawer Handle can occur due to regular wear and tear, accidental damage, or excessive force applied during use. If the handle becomes loose, cracked, or broken, it can make it difficult to open or close the dispenser drawer smoothly.

Symptoms of a bad Dispenser Drawer Handle include:

• Difficulty in opening or closing the drawer.
• Loose or wobbly handle.
• Visible cracks or breakage in the handle.
• Inability to securely grip the handle.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Refrigerator Display Assembly is an OEM replacement part for GE refrigerators. It is the user interface component that displays important information, such as temperature settings, operational modes, and any error codes or notifications. NOTE: Control board is NOT included. Must be ordered separately.

Symptoms of a faulty refrigerator display assembly include:

• No display or a blank screen
• Erratic or flickering display
• Difficulty reading or interpreting the information on the display

Causes of a bad display assembly can include electrical malfunctions, physical damage from impact or moisture exposure, or simply normal wear and tear over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

The Dispenser Drawer is an OEM replacement part for Whirlpool washing machines. This component holds and dispenses laundry detergent, fabric softener, and bleach into the washer during the appropriate cycle. It ensures accurate distribution of cleaning agents, contributing to effective washing performance.

Symptoms of a bad Dispenser Drawer include:

• Detergent, bleach, or fabric softener not dispensing properly
• Residue buildup in the drawer after the cycle
• The drawer being stuck, difficult to open or close, or visibly damaged

Causes of a failing Dispenser Drawer can include clogs from detergent residue, warping or cracking from long-term use, or mechanical issues with the drawer’s sliding mechanism. Regular cleaning can help prevent issues but eventual wear may require replacement.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dispenser Assembly is an OEM replacement part for Whirlpool dishwashers. This component is responsible for releasing detergent and rinse aid during the wash cycle at the appropriate time, ensuring efficient cleaning and drying of dishes. Its precise design integrates seamlessly with the dishwasher’s system for optimal performance.

Causes of a bad Dispenser Assembly can include clogging from detergent residue, damage to the dispenser door or latch, or failure of internal electronic components. Prolonged exposure to moisture and heat may also contribute to wear over time.

Symptoms of a bad Dispenser Assembly include:

• Detergent or rinse aid not dispensing properly
• The dispenser door not opening or closing
• Visible leaks or cracks in the dispenser compartment
• Poor cleaning or rinsing results after the wash cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dispenser Assembly is an OEM part for Whirlpool dishwashers. It is responsible for holding and releasing detergent and rinse aid during the wash cycle, ensuring dishes come out clean and spotless. This assembly is designed to fit seamlessly into the dishwasher's detergent compartment, coordinating with the dishwasher’s cycles for optimal performance.

Over time, the dispenser assembly can suffer from wear and tear, clogs, or damage to its components. Such issues can impede the proper dispensing of cleaning agents, negatively affecting the dishwasher's cleaning efficacy.

Symptoms of a bad dispenser assembly include:

• Detergent or rinse aid not dispensing properly
• The dispenser door not opening or closing correctly
• Residual detergent left in the dispenser after the wash cycle
• Leaks from the dispenser area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Refrigerator Ice Route Cover Assembly is an essential component for maintaining the efficiency of your Samsung refrigeratorGÇÖs ice system. This genuine OEM part ensures a perfect fit and seamless integration with your appliance, providing reliable protection for the ice route. Designed for durability, the cover assembly helps prevent leaks and keeps the ice-making process smooth and uninterrupted. Installing this part is straightforward, allowing you to restore your refrigeratorGÇÖs functionality without hassle. By replacing a cracked, missing, or damaged ice route cover, you can enhance the overall performance of your fridge and enjoy consistent ice production. Compatible with a range of Samsung refrigerator models, this genuine OEM part guarantees quality and longevity. Investing in the Refrigerator Ice Route Cover Assembly not only prolongs the life of your appliance but also ensures that your ice needs are met efficiently, offering you peace of mind and a well-functioning kitchen.

The Detergent Lid is an OEM part for Bosch dishwashers, designed to cover the detergent dispenser compartment. This lid ensures that dishwasher detergent is contained and released at the correct point in the wash cycle, contributing to efficient and effective cleaning. 

Causes of a malfunctioning detergent lid can range from physical damage, such as cracks or warping that prevent a proper seal, to mechanical failure in the latch mechanism that prevents it from staying closed during the wash cycle. 

Symptoms of a bad Detergent Lid include:

• Detergent not being dispensed properly during cycles
• Water leaking from the dispenser area
• Dishes not being cleaned effectively due to the detergent not releasing at the correct time

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Ice Door Center is an OEM part for Frigidaire refrigerators. This component is part of the ice dispenser system, managing the release of ice through the dispenser chute. It helps prevent cold air from escaping the freezer, maintaining energy efficiency and preserving the ice supply.

You should replace the ice door center if it becomes damaged or fails to seal properly. Causes of a bad ice door center can include regular wear and tear, damage from repeated use, or build-up of ice and debris obstructing its movement.

Symptoms of a bad ice door center include:

• Ice dispenser not working correctly
• Ice build-up around the dispenser area
• Warm air entering the freezer, causing ice to melt or clump
• Increased energy consumption due to poor sealing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dispenser Cover is an OEM part for LG refrigerators. It covers and protects the dispenser area where water and ice are dispensed, ensuring the components remain clean and functional.

Over time, the dispenser cover can become damaged due to repeated use, exposure to moisture, or accidental impact. A compromised cover can affect the appearance of the refrigerator and lead to difficulties in using the dispenser.

Symptoms of a bad Dispenser Cover include:

• Cracks or breaks in the cover
• Difficulty in operating the dispenser
• Water or ice leaking from the dispenser area

This OEM LG part is also compatible with Sears/Kenmore.

Note: This is just the cover and does not include any other components. For the entire assembly, order part number ACQ85430239.

The Ice Chute Door is an OEM part for LG refrigerators. It is located in the ice dispenser area on the front of the refrigerator. It opens and closes automatically when ice is dispensed, ensuring a controlled release of ice cubes or crushed ice into the user's glass or container. The door helps to prevent frost buildup, maintain proper insulation, and protect the ice inside the dispenser.

Causes of a faulty ice chute door can include wear and tear over time, damage due to regular use or accidental impact, or a malfunctioning door motor or solenoid.

Symptoms of a bad ice chute door may include:

• Difficulty in dispensing ice
• Frost or condensation forming around the ice chute area             
• The door not opening or closing smoothly or completely

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Soap Dispenser Lever is an OEM part for GE dishwashers. It operates the soap dispenser door, releasing detergent into the dishwasher at the appropriate time during the wash cycle. This lever ensures that detergent is dispensed efficiently for optimal cleaning performance.

Causes of a bad soap dispenser lever can include wear and tear over time, accumulation of detergent residue, or damage due to accidental mishandling or impact. When the lever malfunctions, the detergent might not be released properly, leading to poor cleaning results.

Symptoms of a bad soap dispenser lever include:

• The detergent not being dispensed during the wash cycle
• The dispenser door not opening or closing correctly
• Residual detergent left in the dispenser after the cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dispenser Assembly is an OEM part for LG front-loading washers. It is responsible for dispensing detergent and fabric softener at the appropriate times during the wash cycle. The dispenser assembly contains separate compartments for detergent and fabric softener, as well as timed mechanisms that release each additive when needed for cleaning and softening results.

Causes of a bad dispenser assembly can include issues with the dispensing mechanisms like clogging, jamming, or malfunctions preventing the timely release of detergent and softener. Damage to compartment seals or lids could also cause improper dispensing.

Symptoms of a bad dispenser assembly include:

• Residue or buildup of detergent in the drum or tub
• Strong detergent or fabric softener odors that won't come out of clothes
• Dispenser drawers, lids, or seals that do not close or lock securely

This OEM LG part is also compatible with Sears/Kenmore.

The Detergent Cup Latch is an OEM part for GE dishwashers, specifically designed for certain models. It is located on the detergent dispenser assembly. When the detergent cup is loaded with detergent, the latch holds it in place and prevents it from accidentally opening or spilling during the wash cycle.

Causes of a faulty or damaged detergent cup latch can include regular wear and tear, misalignment, or breakage. These factors can result in issues such as the detergent cup not staying closed, detergent not being dispensed properly, or leaks from the detergent compartment.

Symptoms of a bad detergent cup latch may include:

• The detergent cup not staying closed during the wash cycle
• Detergent not being released or dispensed into the dishwasher
• Leaks or spills from the detergent cup area

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Fabric Softener Dispenser is an OEM part for GE washing machines. This dispenser ensures the accurate distribution of fabric softener into the wash cycle, allowing for even softening of your laundry. It releases fabric softener at the appropriate time, enhancing the washing process and leaving clothes feeling soft and fresh.

Causes of a bad dispenser can include clogs or blockages from fabric softener residue, wear and tear from frequent use, or mechanical failure within the dispenser components.

Symptoms of a bad fabric softener dispenser include:

• Fabric softener not dispensing during the wash cycle
• Residue or buildup in the dispenser compartment
• Leaks or drips from the dispenser area
• Clothes not feeling as soft as usual after washing

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.