General Electric Handle

This handle assembly provides a secure grip for opening a door and installs using the included set screw for a tight fit. It replaces a worn, broken or loose handle to restore normal operation and appearance. What it does:

• Gives a firm, ergonomic grip for opening and closing the door
• Attaches to the door cabinet using a set screw to prevent rotation or wobble
• Replaces handles that are cracked, bent or missing a set screw
• Helps stop handle movement or rattling caused by a loose or stripped fastener

• Disconnect power to the appliance before servicing; follow all safety precautions.
• Position handle, align mounting points, then tighten the set screw with a compatible screwdriver or hex tool.
• Tighten the set screw snugly but avoid over-torquing to prevent stripping or damaging the handle or mounting surface.
• Keep original trim or mounting hardware if it is still serviceable; replace only parts explicitly listed as included.

This tubular door handle assembly replaces a worn, cracked or missing refrigerator door handle so you can open the door easily and restore the appliance's appearance. Durable construction matches original mounting points for a direct fit. What it does

• Replaces a damaged or broken tubular-style door handle
• Restores secure grip and smooth door operation
• Reduces rattling from a loose or bent handle
• Helps maintain the appliance's original look and ergonomics

• One tubular door handle assembly

• No specialized tools required; typically installed with basic hand tools (screwdriver or nut driver)
• Support the door while removing or installing the handle to avoid stress on hinges or gaskets
• Hand-tighten fasteners and avoid over-torquing to prevent damage to the handle or door

This handle base is the mounting support that secures an appliance door handle to the door, restoring proper fit and stable grip so the handle stops wobbling and operates reliably. What it does:

• Secures the door handle to the door frame so the handle stays tight and aligned
• Replaces worn, cracked, or broken mounting support that causes a loose or wobbly handle
• Helps restore safe, consistent opening and closing of the appliance door
• Matches OEM fit where the original handle base has failed

• One handle base

• Disconnect power (or unplug) and follow appliance safety procedures before starting
• Remove the door or access panel as required to reach handle mounting screws; retain original hardware unless replacement hardware is provided
• Use basic hand tools; avoid overtightening screws to prevent cracking the new base

This keeper latch assembly is the replacement latch that secures the appliance door or drawer in the closed position, restoring a proper seal and reliable closing action. It helps stop doors from popping open and keeps contents contained. What it does:

• Acts as the catch that holds the door or drawer closed
• Restores proper latching when worn, broken, or misaligned
• Helps prevent cold air loss and items shifting during use
• Reduces rattling or intermittent opening caused by a damaged latch

• One keeper latch assembly

• Disconnect power (or unplug) and empty the door/drawer area before starting
• Inspect surrounding trim and strike for damage; replace if needed for proper engagement
• Install by aligning latch with mounting holes and securing fasteners; verify proper catch engagement

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

Color: Stainless

This small handle assembly replaces a worn or damaged door handle to restore a clean, secure grip and normal door operation. It's a direct-fit hardware piece used on compatible GE refrigerators and freezers. What it does:

• Provides a finished grip surface for opening and closing the door
• Replaces cracked, loose, or broken small handles
• Helps eliminate rattling or poor door alignment caused by damaged handle hardware
• Restores the original look and functionality of the appliance door

• Basic hand tools may be required;
• Disconnect power and remove food from the door area before starting work to avoid injury
• Handle screws and trim must be tightened to manufacturer torque—do not overtighten to avoid cracking

This is a refrigerator door handle. This particular handle is white in color. If the door handle becomes cracked or broken due to forceful impact with another object, or due to normal wear and tear over a period of time, it will need to be replaced with this part. Another reason that this part will need to be replaced is if it breaks off of the appliance itself and cannot be reattached. Replacing this part is very easy. All that is needed for this procedure is a screwdriver.The door handle is compatible with refrigerators that are made by the GE and Samsung brands. It is sold individually and is sourced directly from the manufacturer.

This extruded refrigerator door handle provides a durable, easy-grip replacement that restores a secure, finished pull on compatible GE refrigerators. Ideal when the existing handle is cracked, loose, or cosmetically worn. What it does:

• Replaces a damaged or broken refrigerator door handle to restore safe opening and closing
• Provides a full-length, extruded grip for comfortable handling
• Matches original mounting points for a direct-fit swap on compatible doors
• Improves appearance by replacing a scratched, faded, or cracked handle

• Typically installs with screws or clips at the door; refer to your model's service manual for exact fasteners
• Power/appliance disconnect not required for handle replacement, but remove contents and support the door to prevent slippage
• Handle surface may have protective film—remove before use

This replacement broil handle restores a clean, functional grip for opening the broiler/oven compartment. Designed to match the original fit and finish, it helps make access to the broiler easier and keeps your range looking complete. What it does:

• Replaces a cracked, faded, or broken broil/oven handle for safe, reliable opening and closing
• Provides a secure grip so the broiler door can be opened without damage to the appliance or user
• Restores the appliance's finished appearance when the original handle is discolored or worn
• Fits the manufacturer's original mounting points for a proper, stable attachment

• Disconnect power to the appliance before beginning any service to avoid injury
• Retain and reuse original mounting screws and brackets unless replacement hardware is specified
• Installation typically requires basic hand tools; handle fastens to the door at the original mounting points

This replacement door strike secures the appliance door latch so the door stays closed and the gasket seals properly. It restores proper door engagement to help maintain temperature and prevent air leaks. What it does

• Provides a secure catch point for the door latch so the door closes and stays latched.
• Helps ensure the door seal engages fully to reduce cold air loss.
• Commonly replaced when the door won't stay closed, the latch slips past the striker, or the strike is cracked or worn.
• Fits into the door frame and aligns with the latch to allow smooth opening and closing.

• One door strike.

• Disconnect power before servicing and remove any stored items from the door area.
• Typical replacement requires removing trim or screws from the door frame; use proper screwdrivers and keep fasteners organized.
• Align the strike with the latch, secure fasteners snugly, and verify smooth latching and proper door seal after installation.