General Electric Handle

This is an end cap handle intended for use on ovens. This part attaches the rest of the door handle to the range. If the end cap handles are cracked or misplaced, a replacement part is required.A visual inspection will determine the condition of the end cap handle. Replacing the end cap handle is a simple process. Make sure to allow the device to cool completely before starting the repair. Assess the condition of both end cap handles before placing an order. Remove the old end cap if there is one in place and attach the new replacement part.This end cap handle is a genuine OEM replacement part. It is sourced directly from the manufacturer. The end cap handle is sold as an individual unit. The replacement part fits on several different models of ranges. It is compatible with devices produced by General Electric, RCA, and Hotpoint brands.

This part is a lower tail handle. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached tail handle on multiple different models and brands of refrigerators. The tail handle fixes to the exterior of the refrigerator. A missing or broken tail handle can prevent the door from functioning properly. The tail handle can become detached from the appliance with regular use and may require replacement. Always ensure the appliance is disconnected from its power source before attempting any repairs. Take appropriate safety precautions and wear protective work gloves. Proper tools are needed to install this part. For more accurate installation information on how and where to install this replacement lower tail handle, refer to the original manufacturer diagrams or owner's manual.As an authentic replacement part, this lower tail handle is suitable for use on various models of refrigerators manufactured by General Electric and Hotpoint. Please note that this is a genuine part made of high-quality and durable plastic and is sold individually.

This microwave door handle provides a solid, comfortable grip to open and close the door. Replace a cracked or loose handle to restore easy access and keep the door operating as intended.

• Provides the pull point for opening and closing the door
• Helps ensure a secure grip and smooth door operation
• Common failure signs: broken or missing handle, cracked mounting posts, loose/wobbling handle, door hard to open
• Restores the appliance's appearance and usability

• Disconnect power to the appliance and allow it to cool before starting
• Access the mounting screws from inside the door by removing the inner trim as directed in your model's service information
• Transfer any end caps or trim pieces from the old handle if applicable
• Tighten screws evenly and verify proper door alignment and latch operation

This part is an upper tail handle. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached upper tail handle on multiple different models and brands of refrigerators. This upper tail handle attaches to the outside of the refrigerator and forms the handle used to open the door. A detached or faulty tail handle can prevent the door from functioning properly. If the tail handle becomes detached, opening and closing the door can be difficult. Always ensure the appliance is disconnected from its power source before attempting any repairs. Proper tools are needed to install this part and protective gloves should be worn. For more accurate installation information on how and where to install this replacement upper tail handle, refer to the original manufacturer diagrams or owner's manual.As an authentic replacement part, this upper tail handle is suitable for use on various models of refrigerators manufactured by General Electric and Hotpoint. Please note that this is a genuine part made of high-quality and durable plastic and is sold individually.

Handle assembly replaces a damaged oven door handle to restore a secure, comfortable grip for opening and closing the door. Matches OEM fit to keep the door operating safely and reliably.

• Provides a sturdy grip for opening and closing the oven door
• Replaces cracked, loose, bent, or missing handles that affect safe access
• Restores proper mounting and alignment of the door handle for everyday use
• Fits OEM mounting points for a straight swap with the original part

• Always disconnect power and allow the appliance to cool before working on the door
• Handle installs using the door's existing fasteners; keep original screws or verify correct replacements

This replacement door lock hook secures the appliance door latch assembly so the door stays closed during cycles, preventing interruptions and ensuring proper operation. Fits into the door/latch mechanism to engage the lock. What it does:

• Captures and holds the door strike so the door remains firmly closed during operation
• Helps the door lock switch engage properly to allow cycle start and prevent mid-cycle door openings
• Commonly replaced when the door won't stay closed, the latch feels loose, or the door intermittently unlocks
• Works as the mechanical mating piece for the door lock assembly

• Disconnect power and water before starting any repair
• Requires access to the door/latch area—some disassembly of the door or console could be needed
• Use basic hand tools and keep track of fasteners; avoid forcing plastic tabs to prevent breakage

This tail handle is the replacement end piece for a refrigerator door handle assembly, restoring a finished grip and proper handle fit. It helps maintain a secure, comfortable hold and keeps the door handle aligned. What it does:

• Replaces a cracked, broken or missing tail/end piece on a refrigerator door handle
• Restores proper fit and finish so the handle sits securely and functions normally
• Helps eliminate looseness, wobble or sharp edges caused by a damaged tail piece
• Matches OEM shape to maintain original handle appearance

• One tail handle piece as shown

• High-level installation: access the door handle ends, remove any retaining screws or clips, swap the damaged tail piece for the replacement, and reassemble
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking
• If the handle is painted or scratched, handle replacement part carefully to avoid surface damage
• Disconnect power only if working near electrical components or lights; otherwise no electrical disconnection is typically required

This genuine replacement door handle restores a secure, easy-to-grip opening for refrigerators and freezers, refreshing the appliance's appearance and usability. Designed to match OEM fit and finish for a factory look. What it does:

• Replaces a cracked, broken, loose, or missing door handle
• Provides a secure grip for opening and closing the door
• Restores proper alignment and appearance of the appliance front
• Helps prevent further damage from using a compromised handle

• Basic hand tools required; handle typically mounts with screws or clips behind the door liner
• Remove food and shelves from the door area as needed for access
• Tighten fasteners securely but avoid overtightening to prevent cracking

This small door handle assembly (22 in) replaces a damaged or worn refrigerator/freezer door pull to restore a secure grip and smooth opening. Fits inline with factory trim for a clean, original appearance. What it does:

• Replaces a broken, cracked or missing small door handle to restore safe gripping and door access.
• Stops wobbling or loose handles that affect door opening and closing.
• Matches factory trim finish to maintain original look and feel.

• Disconnect power and empty the door area before beginning any repair.
• Remove retaining screws or clips from the inner door panel to access the handle fasteners.
• Align handle to mounting holes, then secure with the original hardware; do not overtighten to avoid cracking.

The Door Handle is an OEM part for GE dryers. It provides a mechanism for users to grasp and open or close the dryer door. 

Causes of a bad door handle include normal wear from many openings and closings throughout its use life. Accidental damage during cleaning is also possible.

Symptoms of a bad door handle include:

• Difficulty opening or closing the dryer door 
• Looseness, wobbling, or other signs the handle is not securely attached
• Visible cracks or broken areas that compromise the integrity

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This handle cap is the replacement end cap that finishes and secures a refrigerator door handle, restoring a clean, finished look and helping keep the handle seated. Durable molded finish matches the original part. What it does

• Covers and secures the exposed end of a door handle for a finished appearance
• Helps keep the handle properly seated and aligned during normal use
• Replaces cracked, chipped, or missing end caps that affect appearance and fit
• Restores a clean seal against dirt and moisture at the handle end

• High-level, no-specialty tool install: typically snaps or screws into the handle end; inspect fasteners before reassembly
• Work with the door open and supported; avoid pinching fingers when seating the cap
• If access to electrical components is required during disassembly, unplug the appliance or disconnect power before starting
• Do not force parts; verify correct orientation and seating to prevent damage