Handle

Reviewed repair via youtube. Disconnected the dishwasher power and water. Removed dishwasher from under the cabinet. Removed and disassembled the door and then made the repair. The last step reinstalled the door and dishwasher. Read more

• Won't start
• Door latch failure
• Door won't close

With the power to the dishwasher on, I removed the six or seven screws holding the door panel together. With the door separated, I manually moved the switch which should close when the dishwasher latch closes. This illuminated and activated the control panel telling me that the problem was in the door latch. I purchased a new latch from appliance parts pros and installed it. Very easy fix for a homeowner, taking thirty minutes. Read more

Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle. Read more

Replaced them both within 10 min.very fast and reliable customer service.thanks Read more

Replaced handle after watching your repair video. Read more

Installation of the new handle after receiving a very timely shipment from appliance parts pros was simple. I lined up the top of the handle (hooked 90 degrees over the door) and then swung the handle down to meet the corresponding lower screw. The bottom slid and locked into place, then I screwed the top bolt in. Voila! Read more

I ordered the parts which was easy to order through the internet and received them in a matter of days. I replaced them myself following the video instructions which were easy and simple to understand. Read more

My Granddaughter fixed in about 5 minutes, she was proud and I was happy. Read more

Ordered new freezer arm Read more

Removed 2 outer screws that held on handle and 4 inner screws which held on handle to outer panel. Installed new handle with 4 screws and installed outer 2 screws with spacers which were in door. Read more

Ordered new handles with help from a call to Appliance Parts Pros. Read more

Could not clean yellowed door handles. Knew re-paint would look cheap. Bought both GE factory handles with shipping for a very fair price and had them in 2 or 3 days during the Christmas rush. I will definitely buy from this company again. Read more

Ordered new handle. Removed old handle. Replaced handle. Still nothing interesting in there to eat. Read more

Ordered new parts Read more

The part took way too long to arrive ! it was the size of a nickle and was sent by fed x. after 3 days it went to the post office for delivery. should have been sent usps in the first place........the first woman who helped me was terrific. it was just delivery that was the problem. Read more

Tried bending the strike to get a firmer grip, but no luck. Replaced the door latch and strike. Washer is about ten years old. You can feel the new catch has a more positive engagement. When you replace the strike, be sure not to tilt it downward in front. It will go in the way but it will keep the door from closing. Not sure I needed to replace the strike but didn't want to risk more downtime. Read more