Search Results

This control panel mounts on the appliance's door and provides the push-button interface for selecting cycles and options. Replacing a cracked or unresponsive console restores reliable button operation and a clean, factory look. What it does:

• Houses the user-interface buttons and indicator windows used to select cycles/options
• Provides a rigid mounting surface for the door's UI components
• Helps protect internal wiring at the top of the door
• Typical symptoms: buttons don't respond or work intermittently, unit won't start when Start/Resume is pressed, selections change unpredictably, or the console is cracked/loose

• One console assembly

• Disconnect electrical power; turn off the water supply if needed
• Open the door and remove the inner-door perimeter screws to separate the console from the inner panel
• Note and transfer any reusable parts from the old console as required; make secure, straight ribbon/harness connections
• Reassemble the door, restore power, and run a quick function check before final tightening

This control panel is the user-interface assembly on the front of your appliance. It provides the labeled button area to choose cycles and settings and replaces a worn, cracked, or unresponsive console.

• Interfaces with the appliance's main control to register your selections
• Houses the keypad/buttons and cycle/option labels
• Common symptoms include unresponsive or intermittent keys, cracked or warped panel, and worn/peeling labels
• Can help resolve moisture-damaged or sticky/stuck button issues

• Disconnect power at the breaker before servicing
• Support the console while removing screws to avoid straining wiring
• Transfer any brackets, trim, nameplate, or overlay from the original if applicable
• Align tabs and fully seat any ribbon/plug connectors; avoid pinching wires and test operation before final reassembly

This access panel service cover replaces a damaged or missing cover to protect internal components and give technicians safe access for diagnostics and repairs. It restores a finished appearance while preventing dust and debris from entering service areas. What it does:

• Covers and protects internal components, wiring and controls from dust and damage.
• Provides a removable service access point for diagnostics and repairs.
• Common symptoms: cracked, bent, loose or missing panel; exposed components; rattling or drafts near the service area.
• Replacement helps restore safety, reduce drafts and eliminate noise caused by a loose or damaged panel.

• Disconnect power (and water if applicable) before removing or installing the panel.
• Wear gloves to protect hands from sharp sheet-metal edges.
• Reuse existing screws or mounting clips when possible; basic hand tools typically required.

This control panel replaces a worn, cracked, or cosmetically damaged console surface and restores clear button markings and access to controls. Fits the factory console opening and preserves the appliance's original look. What it does

• Provides the visible console surface that houses the control buttons and display
• Replaces cracked, chipped, or faded panels that make controls hard to read or use
• Restores a clean appearance and correct button/overlay alignment
• Helps prevent dirt and moisture from reaching the internal controls

• Disconnect power to the appliance before starting any work
• Handle the panel carefully to avoid scratching or bending during installation
• Installation typically requires removing console screws and any trim pieces; keep fasteners organized

This white drawer panel is the exterior front of the appliance's drawer. Replace a dented, cracked, or discolored panel to restore a clean look and ensure proper alignment, secure handle mounting, and smooth opening and closing. What it does:

• Forms the visible drawer front and mounting surface for the handle or badge
• Helps the drawer sit flush and operate smoothly when correctly aligned
• Replaces panels that are dented, scuffed, cracked, or rusted
• Can address a loose handle, misaligned drawer front, or scraping when closing

• One white drawer front panel

• Disconnect power and allow the appliance to cool; shut off gas before servicing
• Remove the drawer to access fasteners; retain all screws and hardware
• Transfer the handle/trim from the old panel, align the new panel, and secure fasteners without overtightening
• Wear cut-resistant gloves and use caution around sharp metal edges

This part is a genuine OEM replacement control panel intended for use with dishwasher models.The control panel allows the user to select the desired cycles of the dishwasher. It houses the buttons and the display. The control panel could become broken or start to malfunction over time, which might include the buttons getting stuck or jammed, or the display failing to light up. When replacing any appliance part, the appliance should be turned off and unplugged from power to prevent potentially serious injuries from occurring. This part was manufactured by Whirlpool. This control panel is sold individually. It is intended for use with dishwasher models manufactured by Whirlpool, Maytag, Jenn-Air, Amana, Admiral, Norge, and other brands.

The Dishwasher Front Door Panel is an OEM part for Whirlpool brand dishwashers. Forming the outer surface of the door, this stainless panel provides a protective barrier and the surface for mounting handle components. 

Causes of a bad front door panel can include damage from repetitive closure stresses, impacts from loaded dishes, or cracks developing from regular cleaning chemicals.

Symptoms of a bad front door panel include:

• Cosmetic damage detracting from appearance
• Obstructions preventing proper latching of the door  
• Leaks forming at the door gasket sealing surface

This OEM replacement is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models. 

The Control Panel is an OEM part for Whirlpool ranges. As the interface between the user and appliance, the control panel is responsible for housing all of the electronic controls and display that allow for selection and monitoring of oven functions like temperature, bake time, locks, and timers.

Causes of a bad control panel can include cracked or worn buttons or displays that no longer register touch input properly. Splashing liquids or steam exposure over time can cause internal circuitry issues as well.

Symptoms of a bad control panel include:

• Unresponsive or malfunctioning buttons
• Fading or inaccurate displays
• Error codes indicating electrical faults
• Inability to properly turn elements or functions on/off

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This console cover graphic is the labeled overlay that mounts on the appliance control console, restoring clear, readable control markings and the console's finished appearance for easier control use and improved cosmetics. What it does:

• Replaces faded, cracked, or peeling control labels so settings and icons are legible
• Restores the visible markings around buttons and knobs for accurate operation
• Covers and protects the underlying console surface from everyday wear
• Improves the appliance's appearance by replacing damaged or discolored graphics

• Disconnect power to the appliance before starting any repair
• Typically installs using the console's existing screws or clips; align carefully before fastening
• Handle the graphic by the edges to avoid fingerprints or damage to the printed surface
• After installation, restore power and verify all controls operate and labels align correctly

The Dishwasher Front Lower Cover is designed to protect and enhance the front appearance of your Samsung dishwasher. This genuine OEM part ensures a seamless fit, maintaining the integrity and aesthetic of your appliance. Crafted from durable materials, the front lower cover provides robust protection against scratches, stains, and everyday wear, extending the life of your dishwasher. Its precise design allows for easy installation, enabling you to restore your dishwasher's functionality without any hassle. The Dishwasher Front Lower Cover not only improves the visual appeal of your kitchen but also helps in maintaining the efficiency of your appliance by safeguarding internal components. Compatible with a wide range of Samsung dishwasher models, this genuine OEM part guarantees compatibility and reliability. If your original front lower cover is cracked, missing, or damaged, the Dishwasher Front Lower Cover is the perfect solution to keep your appliance looking and working like new, providing you with peace of mind and a better kitchen experience.

This replacement panel restores your appliance's finished look and helps protect internal components. Replacing a cracked or loose panel eliminates gaps and rattles while keeping nearby trims or controls secured and aligned. What it does:

• Covers and shields internal areas, providing a clean, finished exterior
• Helps retain and align adjacent parts
• Restores proper fit when the original is cracked, warped, or discolored
• Common symptoms: broken mounting tabs, won't stay attached, vibration or rattling, visible gaps

• 1 panel

• Disconnect power to the appliance before servicing
• Wear cut-resistant gloves; edges can be sharp
• Retain and transfer any screws, clips, or badges from the original panel
• Align tabs/holes and secure fasteners evenly—do not overtighten

This part is the outer panel for the drawer on a trash compactor. This part protects the wiring and other components inside of the drawer and also provides a decorative finish for the face of the unit.In the event that the stainless steel finish becomes scratched, dented, or damaged in any way, this is a high-quality replacement part. The screws may need to be reused when installing the new part, so keep those in a safe place so they do not get lost. Before replacing this part, unplug the unit from the electrical outlet or turn off the house circuit breaker. Wears gloves for safety during this process.This outer panel is compatible with trash compactors that are manufactured by the Whirlpool and KitchenAid brands. It is sold individually and sourced straight from the manufacturer as a genuine OEM part.

Color: White. Includes insulation. Other colors: For almond use WP3384157, for biscuit use WP3384157, for black use WP3379920.

The Control Module Front Cover is an OEM part for Bosch dishwashers. This front cover protects the internal control board governing all dishwasher functions.

Causes of a bad control module front cover can include cracked or broken plastic from overtightening, damage due to impact or handling, or warping over time.

Symptoms of a bad control module front cover include:

• Lights and controls malfunctioning or not responding
• Water or debris entering the control area
• Loose or missing front cover exposing internal parts
• Damage allowing for short circuits or shock hazards

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Color: White.

This replacement dishwasher door forms the hinged front of the tub. Replacing a bent or damaged door restores proper alignment and latching so cycles can run correctly and the wash chamber remains properly contained.

• Creates the front barrier of the wash chamber and supports the latch/handle area
• Aligns with the door gasket to promote a proper seal
• Restores correct closing and latching so the cycle can start
• Common symptoms: difficulty closing, cycle won't start due to door not latching, visible dents/warping, poor seal along the gasket

• Disconnect power and turn off the water supply before servicing
• Support the door and carefully relieve hinge spring tension during removal
• Transfer any reusable components from the old door to the new one as needed
• Run a test cycle to ensure proper latching