By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
Need Help?
Call
Hinge cable connects the dishwasher door to the tension spring. Replace if broken, frayed, disconnected, or causing door to drop when opened.
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more
Connects the washer drum to the drive system. Replace if hub is cracked, worn, or causing grinding noises during spin. Mounts at base of wash basket.
This repair was performed on a Whirlpool Cabrio clothes washer Model # WTW5640XW0 which has the digital electronic controls rather than the older style timer, electro/mechanical controls. This washer was made in 2010. Simply having the diagnostic programs on this machine is wonderful and they work remarkably well and led me to the shifter/rpm sensor component straight away. It was a simple replacement by tipping the washer onto its front and accessing through the bottom. The machine was put... Read more
Fix a washer that won't drain or leaves standing water with a new drain pump assembly. Common DIY repair that restores proper water removal each cycle.
Had to replace the drain pump and the PSB main board. Read more
Secures suspension springs at the washer base to absorb vibrations. Replace if cracked, worn, or broken to restore proper drum stabilization.
I started with the suspension pad kit and the tub suspension pads. I do have to say if you have an older model washer (mine is approx 17 years old) be prepared to let the inner tub sit in penetrating oil for a few days before attempting to take the tub out. I was able to get to this point on my own and then it wouldn't budge. My husband ended up buying some direct drive tool (it was pretty cool) and was able to break the tub free after two days. Yay! From there he took the the inner tub and put... Read more
Fix a washer that won't start or door that won't stay locked with a new door latch. Common when the lid unlocks during cycles or clicks but opens easily.
OK this is one of those stories that can't help but encourage those of us who have absolutely no idea how appliances work and yet by simply refusing to pay such ridiculous repair prices can honestly get it done with a "FRACTION" of the cost. So here is my story & the scary unknown(s) BUT the incredible help offered to me to successfully win the ( I won't allow you to take advantage of me ) anymore conclusion. I had a 2 1/2-year-old Maytag coin wash machine that just quit working; after... Read more
Fix a washer that won't advance cycles, spins continuously, or has erratic operation. This timer controls wash, rinse, and spin cycles. 10-minute DIY.
Replaced timer. Read more
Replacement drain hose for dishwashers. Carries wastewater from the tub to household plumbing. Replace if cracked, leaking, or develops pinholes.
This was a dishwasher swap out. I first turned the water off to the inlet hose of the dishwasher from underneath the sink. Removed the inlet water hose from sink to dishwasher. (use wrench or adjustable wrench) Then removed the screws securing old dishwasher from the cabinetry. I then pulled out the dishwasher from the cabinetry hole it was in. I unplugged the power cord from the wall of the old dishwasher. Then Ii removed the other end of inlet hose still attached to old DW (braided stainless... Read more
The Latch is an OEM replacement part for Whirlpool washing machines. This component ensures the washer's door or lid is securely closed during operation, preventing water spillage and ensuring the safety of the user by halting operation when opened.
Causes for a malfunctioning Latch can include mechanical wear from frequent use, damage from forceful closing or opening, or electrical issues affecting its signaling capability to the washer's control system.
Symptoms of a bad Latch include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Watched a quick YouTube video. Read more
The Lid Lock Assembly is an OEM replacement part for GE washing machines. This assembly ensures the washer lid remains securely locked during operation, preventing accidental openings and ensuring safety during high-speed spin cycles. It also helps the machine operate only when the lid is properly closed.
Causes of a bad lid lock assembly can include wear from frequent use, electrical issues affecting the locking mechanism, or damage to the lock's housing or wiring. These issues can impair the washer's ability to lock and operate properly.
Symptoms of a bad lid lock assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Washer not filling or overfilling? This water level pressure switch monitors water levels and signals when to stop filling. Easy 10-minute DIY repair.
The LG Model LG Washer model WM2487HRMA ISSUE: Washing Machine was filling very slowly. Overnight it would fill about 1 or 2 gallons. I would clear the tub by pushing a) Power b) set spin to None c) push Start. That would empty the tub. REPAIR SOLUTION: That did not solve the problem. Second, I replaced both the single (1) Water inlet valve assembly Part Number:5220FR2006H and also the Water Level pressure switch Part Number:6601ER1006E That solved the problem. I can't tell you which... Read more
Suspension rod kit connects the outer tub to the washer base for support and stability. Replace when rods are worn, broken, or causing excessive movement.
Rebalanced the load but noticed the drum was sitting lower and the springs were wore out and it went out of balance easy, so i got the suspension rod kit and installed it and it works much better. It took me 2 hours because i didnt have adequate room to move around. Hour job if you have room. Read more
The Washer Circulation Pump Motor is an OEM replacement part for LG washing machines. It is a vital component responsible for circulating and pumping water through the wash tub during the various wash and rinse cycles.
Symptoms of a faulty circulation pump motor include:
Causes of a bad circulation pump motor can range from normal wear and tear over time, electrical malfunctions, blockages or obstructions in the pump impeller, or physical damage from foreign objects or debris.
This OEM LG part is also compatible with Sears/Kenmore washing machine models.
Replaced the drain pump and circulating pump units. Read more
Fix fabric softener not dispensing properly with this washer dispenser cup. Replaces broken or cracked dispensers. Easy 20-minute DIY installation.
Received repair parts very fast delivery. Easy fix! Read more
Replace your washer's cracked or broken lid. This top-loading washer lid installs over the drum opening. Order a new lid if yours is cracked at hinges.
Replaced lid and hinges. Read more
Three-pad kit that cushions and stabilizes the wash tub assembly. Replace when pads are worn, compressed, or missing to restore proper vibration dampening.
I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick Read more
The PUMP MOTOR is an OEM part for LG washing machines. It is an electric motor that powers the pump responsible for circulating water inside the washing machine tub and through hoses during all wash cycles. Efficient water flow is necessary for proper cleaning and rinsing performance.
Causes of a bad pump motor can include mineral buildup inhibiting smooth rotation, worn motor windings affecting current flow, or damage from water damage into the motor housing.
Symptoms of a bad pump motor include:
This OEM LG part is also compatible with Sears/Kenmore.
First off I want to say Appliance Part Pros rock! I have used them for purchasing repair items for other appliances in the past, so when my washer started making weird noises this was my go to source. I thought my problem was likely pump motor related as the water wasn't draining and I could hear the sound of the pump trying to work. After reviewing what others who had similar situations found to be the problem I took a gamble and decided to get the drain pump. Some who had that problem... Read more
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.