Washer Support Parts

The Shock Absorber Kit is an OEM part for Frigidaire washing machines. It is a comprehensive kit that includes 2 shock absorbers, 1 locking pin, 4 lock nuts, and a set of instructions. These shock absorbers play a vital role in reducing vibrations and absorbing shocks during the washing cycle, providing stability and minimizing excessive movement.

Causes of a bad shock absorber can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling.

Symptoms of a bad Shock Absorber include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or walking during the operation
• Leaks due to increased stress on the tub and other components

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods that support the washer tub and help absorb vibrations during the spin cycle. These rods ensure the tub remains balanced, providing smooth and quiet operation.

You should replace the suspension rods if they become worn or damaged. Over time, heavy loads, unbalanced loads, or general wear and tear can cause the rods to lose their ability to stabilize the tub effectively. This can lead to excessive vibrations and noise during the wash cycle.

Symptoms of a bad suspension rod kit include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or knocking noises
• Washer tub not staying centered
• Washer moving or walking during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Shock Absorber is an OEM part designed for Whirlpool washing machines. This part helps to dampen the motion of the tub during the spin cycle, reducing vibrations and noise. By absorbing the energy produced during operation, the shock absorber contributes to the stability and longevity of the machine. A well-functioning set of shock absorbers is essential for maintaining the washer's performance and preventing damage to other components.

Causes of a bad shock absorber can include wear and tear from regular use, excessive load sizes or unbalanced loads, and structural damage from moving or improper handling.

Symptoms of a bad Shock Absorber include:

• Increased vibration and noise during the spin cycle
• The washer moving or "walking" across the floor
• Unusual wear on other components due to excessive movement

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rod and Spring Assembly is an OEM part for GE washing machines. It works to suspend the wash basket and absorb shocks during the agitation cycle.

Causes of failure can include prolonged usage, heavy loads, or accidental impact damage. Worn springs lose their absorption abilities over time.

Symptoms of a bad suspension rod and spring assembly include:

• Excessive vibration or shaking of the washer tub
• Noise or banging sounds coming from inside the washer
• Difficulty spinning or wobbling of the wash basket out of alignment
• Cracks, fractures or damage to internal washer components over time

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Left Rod & Spring Assembly is an OEM part for GE washing machines. This assembly is designed to support and stabilize the washing machine tub during the wash and spin cycles. The rod and spring work together to absorb shocks and vibrations, ensuring smooth operation and reducing noise.

Over time, the left rod and spring assembly can become worn out or damaged. Causes of a bad assembly can include regular wear and tear, heavy or unbalanced loads, or damage from impacts. A faulty rod and spring assembly can lead to increased vibrations, noise, and instability during operation.

Symptoms of a bad Left Rod & Spring Assembly include:

• Excessive shaking or vibrating during the wash or spin cycles
• Loud banging or thumping noises
• The washing machine tub being off-balance or misaligned
• The washer moving or "walking" during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Washer Flange Shaft Assembly is an essential component designed to ensure the smooth operation of your Samsung washer. This genuine OEM part guarantees a perfect fit and reliable performance, matching the quality standards of your original appliance. Crafted from durable materials, the assembly flange shaft provides stability and support to the washerGÇÖs drum, reducing noise and preventing unnecessary wear and tear. Installing this part helps maintain the balance and efficiency of your washing machine, leading to longer appliance life and better cleaning results. The Washer Flange Shaft Assembly is specifically compatible with a variety of Samsung washer models, making it a versatile choice for your repair needs. Its straightforward installation process allows you to quickly replace a damaged or faulty flange shaft, minimizing downtime and restoring your washerGÇÖs functionality. By choosing this genuine OEM part, you ensure that your Samsung washer operates smoothly and effectively, providing you with the dependable performance you expect from your appliance.

The Shock Absorber is an OEM part for Whirlpool washing machines. This component is essential for reducing vibrations and stabilizing the washer drum during operation, particularly during the spin cycle. It helps to absorb shocks and minimize excessive movement, ensuring the washing machine runs smoothly and quietly.

Note: The unit requires a quantity of 4. Package includes 1 only; order as needed.

Symptoms of a failing Shock Absorber include:

• Excessive shaking or vibrating of the washing machine, especially during the spin cycle
• Loud banging or thumping noises during operation
• The washing machine moving or "walking" across the floor
• Visible damage or wear to the shock absorber

Causes of a bad shock absorber can include wear and tear from regular use, heavy or unbalanced loads that put extra strain on the absorbers, or physical damage from impacts or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Suspension Spring Kit is an OEM part for Whirlpool washing machines. This kit includes multiple springs that support the washer tub, helping to absorb shocks and reduce vibrations during the wash cycle, ensuring smooth and stable operation.

Causes of a bad suspension spring can include wear and tear over time, heavy loads, or unbalanced loads that put excessive strain on the springs. Damaged or worn springs can lead to increased movement and instability, affecting the washer’s performance and potentially causing damage to other components.

Symptoms of a bad suspension spring include:

• Excessive shaking or vibrating during the wash cycle
• The washer tub appearing out of alignment or sagging
• Loud banging noises during operation
• The washer moving or "walking" across the floor

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spider is an OEM replacement part for LG washing machines. The spider is a central part located inside the washer tub that the inner tub spins on during the washing cycle. It plays an important role in evenly distributing load vibration across the washer tub and chassis.

Causes of a bad spider can include cracks or wear to the plastic housing over time due to continuous use and load stress, or damage from heavy impacts during transport or installation.

Symptoms of a bad spider include:

• Excessive vibration and noise during spin cycles
• The inner tub wobbling or becoming imbalanced
• Cracks or breaks in the spider housing
• Premature wear of other internal components like bearings

This genuine LG OEM replacement part is also compatible with some Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods and springs, which are essential for supporting the washer tub and ensuring it remains balanced during operation. The suspension rods help absorb vibrations and reduce the movement of the tub, providing stability throughout the wash and spin cycles.

Causes of a bad suspension rod kit include wear and tear over time, heavy or unbalanced loads that strain the suspension system, or physical damage to the rods or springs.

Symptoms of a bad suspension rod kit include:

• Excessive shaking or vibrating during the wash cycle
• Washer tub banging against the sides of the machine
• Unbalanced loads causing the washer to stop mid-cycle
• Loud noises during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Spider and Shaft Assembly is essential for maintaining the smooth operation of your washing machine. This genuine OEM part is specifically designed to ensure compatibility with a wide range of Samsung washer models, providing a secure and precise fit. Crafted from high-quality materials, the spider and shaft assembly offers exceptional durability and reliability, minimizing the risk of unexpected breakdowns. By replacing a worn or damaged assembly with this genuine OEM part, you can restore your washers performance, enabling efficient and balanced spin cycles. Installation is straightforward, allowing you to quickly get your appliance back up and running without the need for professional assistance. Additionally, this assembly helps extend the lifespan of your washer, saving you time and money on potential repairs. Choosing the Washer Spider and Shaft Assembly ensures that your Samsung washer functions optimally, delivering the best cleaning results for your laundry needs. Trust in this quality replacement part to enhance the performance and longevity of your appliance.

The Damper Pad Kit is an OEM part for Whirlpool washing machines. The kit includes three specially designed pads made of durable materials. These pads effectively dampen vibrations, providing cushioning and stability to minimize noise and ensure a smoother operation of the washing machine. Additionally, the kit includes three tubes of poly-lube grease. This grease lubricates the contact points between the damper pads and the machine's framework.

Causes of a faulty damper pad kit can include wear and tear over time, damage due to heavy loads or mishandling, or degradation of the pads and lubrication.

Symptoms of a bad damper pad kit may include:

• Excessive noise or rattling during washing or spinning
• Increased vibrations or movement of the washing machine
• Visible wear or damage to the existing pads

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes rods that connect the washing machine drum to the chassis, helping to absorb vibrations and prevent excessive movement during operation.

Causes of a bad Suspension Rod Kit can include deteriorating springs, worn mounts, or damage from excessive vibration over multiple cycles. 

Symptoms of a bad Suspension Rod Kit include:

• Unusual noises during the spin cycle, such as banging or thumping sounds.
• The washing machine drum appearing off-balance, especially during the spin cycle.
• Excessive vibration or "walking" of the machine during operation.
• Clothes coming out more wrinkled than usual due to an unsteady spin.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washers. This kit contains the suspension rods that connect the outer tub to the base of the washing machine, providing support and stability during the wash cycles. Each rod measures 23-1/4"L x 1-1/2" in diameter, designed to handle heavy loads.

Symptoms of worn or damaged suspension rods may include:

• Excessive vibration or shaking during spin cycles
• Loud banging or thumping noises
• Leaks due to increased stress on tub components
• The washing machine walking or moving excessively

Causes of suspension rod failure can include normal wear over time, impact or damage from overloading, or improper leveling and installation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

The Washer Support Damper Rod Assembly is an essential component for maintaining the optimal performance of your Samsung washer. This genuine OEM part ensures proper damping and stability during your wash cycles, effectively reducing excessive vibrations and noise. Designed specifically for Samsung washers, it provides a reliable solution to enhance the smooth operation of your appliance. The durable construction of the Washer Support Damper Rod Assembly guarantees long-lasting performance, helping to extend the lifespan of your washer. Easy to install, this assembly allows you to restore your washerGÇÖs functionality quickly and efficiently. Whether your current damper rod is worn out, damaged, or malfunctioning, this genuine OEM part is the perfect replacement to keep your washer running smoothly. Trust in the quality and compatibility of this Samsung part to deliver a better laundry experience and ensure your appliance operates at its best.

The Suspension Rod Assembly is an OEM part for LG washing machines. This assembly includes multiple rods designed to support the washing machine drum and minimize vibrations during the wash and spin cycles. By stabilizing the drum, the suspension rods help ensure smooth and quiet operation, preventing excessive movement that could damage the appliance.

Causes of a bad suspension rod assembly can include wear and tear from regular use, imbalance due to overloading the washer, or physical damage from accidental impacts. When the suspension rods are compromised, the washing machine may become unstable and noisy.

Symptoms of a bad suspension rod assembly include:

• Excessive shaking or vibrating during wash cycles
• Loud banging or thumping noises
• The washing machine moving or "walking" during operation
• Uneven or incomplete washing due to an unstable drum

This OEM LG part is also compatible with Sears/Kenmore models.