General Electric Handle

This White Door Handle is an OEM replacement part for GE ranges. Located on the oven door, this handle provides a means of safely accessing the cooking cavities. As contact points, this durable handle allows withstanding high-heat openings and closings. 

Causes can be normal wear and tear over many heating cycles, repeated heavy impacts from storage items, or long-term UV exposure breaking down surface finishes.

Symptoms of a bad door handle may include:

• Breaks, cracks, or splits appearing in the plastic or coating
• Discoloration, fading, or peeling removing their clean look   
• Wobble, looseness, or difficulty opening/closing the door due to wear

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Handle Door FF is an OEM part for GE refrigerators. This handle is designed for the refrigerator's fresh food compartment door, providing a sturdy and reliable grip for easy opening and closing of the door. 

You should replace the handle door if it becomes damaged or loose, which can occur due to frequent use, accidental impacts, or wear over time. A faulty handle can make it difficult to open or close the refrigerator door properly.

Symptoms of a bad handle door include:

• Cracks or breakage in the handle
• The handle feeling loose or wobbly
• Difficulty in gripping or operating the handle
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace a worn or broken fresh food door handle with this color-matched bisque handle to restore a solid, comfortable grip and clean appearance on your refrigerator's main compartment door.

• Provides the handhold to open and close the fresh food door
• Worn, loose, cracked, or missing handle can make the door hard to open and detract from appearance
• Color: Bisque, for models that use a bisque fresh food handle
• Restores proper feel and operation when opening the refrigerator section

• Unplug the appliance or disconnect power before servicing
• Open the door to access handle screws; support the handle as you remove fasteners
• Transfer any end caps or mounting screws from the old handle if your model reuses them
• Tighten all screws securely and check for firm, wobble-free fit

This dishwasher door latch secures the door closed and engages the safety interlock so wash cycles can start and run without leaks or interruptions. Replace a worn or broken latch to restore a firm, reliable door closure. What it does:

• Locks the door to compress the tub gasket and help prevent leaks
• Engages the door switch/interlock so the control can start and continue cycles
• Replaces latches that are cracked, bent, or have weakened/broken springs
• Common symptoms: door won't latch/close, cycle won't start, door pops open mid-cycle, water seeping from the top of the door

• 1 door latch

• Disconnect power and shut off water before servicing
• Open the door and remove inner door panel screws to access the latch
• Note spring and linkage orientation; transfer any reused hardware from the old latch
• Align with the door strike and test closure before fully reassembling

The Handle is an OEM part for GE microwaves. This handle provides a secure and convenient grip for opening and closing the microwave door, ensuring easy access to the interior.  

Causes of a bad handle can include regular wear and tear, physical damage from impacts, or exposure to high temperatures.  

Symptoms of a bad handle include:

• The handle becoming loose or wobbly
• Visible cracks or breaks in the handle material
• Difficulty in gripping the handle securely
• The handle detaching from the microwave door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Handle Assembly is an OEM part for GE refrigerators. It provides a sturdy grip for opening and closing the freezer door, ensuring easy access to the freezer compartment. This handle is designed to fit securely on the door, enhancing both functionality and the overall appearance of the appliance.

Causes of a bad door handle assembly can include regular wear and tear, accidental impacts, or improper installation. Over time, these factors can lead to the handle becoming loose, cracked, or broken, making it difficult to open or close the freezer door properly.

Symptoms of a bad freezer door handle assembly include:

• Loose or wobbly handle
• Visible cracks or damage
• Difficulty in opening or closing the freezer door
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door handle assembly replaces a damaged or loose handle and restores a secure, comfortable grip. Finished in bisque to match your appliance, it refreshes appearance and helps the door open and close as intended.

• Provides the exterior grip for opening and closing the freezer door
• Attaches to the door's factory mounting posts/brackets and secures with screws or set screws (varies by model)
• Restores original look with a matching bisque finish
• Common symptoms: cracked, broken, or missing handle; handle feels loose or will not stay tight

• Wear gloves and keep the door closed for stability during replacement
• If present, remove trim caps; loosen set screws or mounting hardware and lift off the old handle
• Position the new handle on the mounting posts/brackets; tighten hardware until snug; reinstall caps
• Do not overtighten; verify the handle is aligned and secure before use

Color: white. It measures about 16 inches wide by 2 inches high by 2 inches deep.

Color: Black

The Door Handle is an OEM part for GE refrigerators. This part provides a secure and comfortable grip for opening and closing the refrigerator door.  

Causes of a bad door handle can include regular wear and tear, accidental impact, or repeated use, which can lead to cracks, breaks, or loosening of the handle.  

Symptoms of a bad door handle include:

• The handle feeling loose or wobbly
• Difficulty in opening or closing the door
• Visible cracks or breaks in the handle
• The handle detaching from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: White

This replacement door handle restores a secure, comfortable grip on your appliance door. A worn or broken handle can make opening the door difficult and unsafe; swapping it returns normal operation and appearance.

• Provides the leverage needed to open and close the door smoothly
• Helps resolve issues like loose, cracked, or missing handle
• Improves safety by giving a stable handhold
• Restores original fit and finish when the old handle is worn or damaged

• Unplug power and let the appliance cool completely before starting
• Support the door and remove mounting screws from the interior side as applicable
• Transfer any end caps or trim pieces from the old handle if required
• Do not overtighten screws to avoid cracking the handle or door panel

This part is a lower tail handle. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached tail handle on multiple different models and brands of refrigerators. The tail handle fixes to the exterior of the refrigerator. A missing or broken tail handle can prevent the door from functioning properly. The tail handle can become detached from the appliance with regular use and may require replacement. Always ensure the appliance is disconnected from its power source before attempting any repairs. Take appropriate safety precautions and wear protective work gloves. Proper tools are needed to install this part. For more accurate installation information on how and where to install this replacement lower tail handle, refer to the original manufacturer diagrams or owner's manual.As an authentic replacement part, this lower tail handle is suitable for use on various models of refrigerators manufactured by General Electric and Hotpoint. Please note that this is a genuine part made of high-quality and durable plastic and is sold individually.

This is an end cap handle intended for use on ovens. This part attaches the rest of the door handle to the range. If the end cap handles are cracked or misplaced, a replacement part is required.A visual inspection will determine the condition of the end cap handle. Replacing the end cap handle is a simple process. Make sure to allow the device to cool completely before starting the repair. Assess the condition of both end cap handles before placing an order. Remove the old end cap if there is one in place and attach the new replacement part.This end cap handle is a genuine OEM replacement part. It is sourced directly from the manufacturer. The end cap handle is sold as an individual unit. The replacement part fits on several different models of ranges. It is compatible with devices produced by General Electric, RCA, and Hotpoint brands.

Restore a secure, comfortable grip with this black door handle. It replaces a damaged or loose handle on your oven, bringing back the original look and making door operation feel solid again.

• Provides the handhold for opening and closing the oven door
• Direct replacement for a cracked, broken, or missing handle
• Helps resolve a loose or wobbly handle and difficulty opening the door
• Refreshes the appliance's front with a clean black finish

• Disconnect power and allow the oven to cool completely before servicing
• Protect the glass and finish; support the door on a padded surface if removed
• Transfer any decorative end caps or spacers from the old handle if your model uses them
• Tighten mounting screws evenly; do not overtighten on glass or trim

This black door handle restores a secure, comfortable grip and a clean, factory look to your appliance's door. Replace a cracked, loose, or damaged handle to keep the door easy to operate and the exterior looking right.

• Provides the handhold used to open and close the door
• Attaches to the door with screws; designed to replace a broken, cracked, missing, or loose handle
• Common symptoms: handle broken, wobbling, missing, or finish damage/scuffs
• Restores appearance without affecting door latch or seal function

• Disconnect power before servicing and allow the appliance to cool completely
• Access handle fasteners per your model (often from the inner door panel); support any glass or trim
• Keep track of spacers and screws for reassembly
• Tighten mounting screws evenly; do not overtighten; verify smooth door operation