General Electric Leg Or Foot

This axle wheel is a replacement drum support component that helps the dryer drum roll smoothly and quietly. Replacing a worn axle wheel restores proper drum alignment and reduces noise or binding during operation. What it does:

• Supports and centers the dryer drum on its axle so the drum turns freely
• Replaces worn or damaged wheel surfaces that cause squeaks, grinding, or rubbing
• Helps prevent drum wobble and uneven wear on the drum seal or rollers
• Works as part of the drum support system to maintain smooth rotation

• One axle wheel

• Disconnect power before starting and work on a cool, empty dryer
• Removing the dryer front or drum may be required to access and replace the wheel
• Inspect other drum support components (rollers, glides, bearings) and replace as needed

The Drawer Roller Asm is an OEM component specifically designed for GE Waste Compactors. This Drawer Roller Asm is responsible for safely guiding the compactor drawer in and out. By assisting the smooth opening and closing of the drawer, it helps reduce strain on the entire compactor system.

Causes of bad rollers can include excessive use over time, improper loading that puts undue stress on the rollers, or damage from impact or pinching. 

Symptoms of bad rollers include: 

• Difficulty opening or closing the compactor drawer 
• Excessive noise or grinding sounds when moving the drawer
• The drawer not sliding freely and securely on its rollers

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore trash compactor models.

This mobility front assembly replaces the worn front caster/roller that helps a refrigerator glide when pulled out for cleaning or service. Restores smooth forward movement and stable front support for safe access. What it does:

• Provides a rolling front support so the appliance moves smoothly on the floor
• Helps stabilize the front of the refrigerator when it is pulled out or pushed in
• Reduces sticking and uneven movement caused by worn or damaged rollers
• Can help minimize scraping or surface damage during repositioning

• One mobility front assembly

• Disconnect power and, if applicable, water supply before servicing
• Empty or secure loose items and have a second person help when tilting or moving the appliance
• Remove the kickplate or access panel as required to reach and replace the front assembly
• Tighten fasteners to OEM torque and test mobility before returning the appliance to normal use

This roller veg pan is the replacement roller assembly that supports and allows the refrigerator crisper/vegetable drawer to slide smoothly. It restores proper drawer movement and helps keep produce accessible. What it does

• Replaces worn or broken roller that supports the vegetable/crisper drawer
• Restores smooth sliding and alignment of the drawer in the refrigerator compartment
• Helps reduce sticking, scraping, or uneven drawer travel
• Commonly replaced when the drawer won't roll or is difficult to open and close

• One roller veg pan assembly (single drawer roller)

• Unplug or disconnect power to the appliance before any service to avoid injury
• Remove the crisper/vegetable drawer and lift or unclip the roller housing per your model's instructions
• Slide the old roller assembly out and snap or screw the replacement into place; test drawer operation before reloading

This roller supports the vegetable/crisper drawer so it slides smoothly in and out of the refrigerator. It replaces worn or broken rollers to restore proper drawer movement and reduce sticking or catching. What it does:

• Replaces a damaged or worn roller that prevents the veg/crisper drawer from sliding smoothly
• Helps eliminate drawer binding, uneven travel, or noisy movement
• Supports the drawer weight and keeps the pan aligned on its track

• Disconnect power to the appliance before starting any repair
• Remove the crisper/veg drawer and housing per your model's instructions to access the roller
• Roller typically snaps into a bracket or slides onto a pin; inspect mating parts and replace any broken clips

This adjustable leveling leg replaces a worn or damaged refrigerator foot to restore stable, level support and smooth door operation. Simple height adjustment helps eliminate rocking and keeps the appliance sitting evenly on uneven floors. What it does:

• Supports the appliance weight and lets you fine-tune height for proper leveling
• Compensates for uneven floors to reduce rocking and wobble
• Helps doors seal and align correctly by allowing height adjustment
• Reduces vibration-related noise when the cabinet sits evenly

• One adjustable leveling leg

• Use gloves and eye protection; unplug the appliance and remove food or shelves near the work area before starting
• Tilt or raise the appliance slightly as recommended by the manufacturer to access the leveling leg; support the cabinet securely
• Turn the leg to raise or lower the appliance; check level and door operation, then recheck after the appliance settles
• If the leg threads or mounting hardware are damaged, replace all affected components before returning the appliance to service

This rear wheel roller replaces a worn or damaged drawer/glide wheel to restore smooth movement and reduce sticking or noise. Durable molded construction fits the rear guide position to help support and steady the sliding drawer or bin. What it does

• Supports and guides the appliance drawer or bin for smooth in-and-out motion
• Replaces cracked, chipped, or worn rear wheel that causes binding or catching
• Helps reduce squeaks and uneven movement from a damaged roller
• Restores proper alignment and load support at the rear glide point

• One rear wheel (roller)

• Disconnect power and remove the drawer/bin per your owner's manual before replacing the wheel
• Typically installs by snapping or sliding into the rear glide bracket; basic hand tools may be needed
• Inspect mating tracks or brackets for damage and clean debris before installing the new wheel

This adjustable leveling leg replaces a worn or damaged support foot to stabilize and level the appliance, reducing rocking and helping ensure even operation. Easy to adjust for a secure, balanced fit under the appliance. What it does

• Provides a stable, adjustable support foot to level the appliance on uneven floors
• Helps stop rocking, vibration, and noise caused by an unbalanced appliance
• Restores correct appliance height for proper door/clearance alignment and drainage
• Compatible with standard screw-in mounting used on many GE laundry appliances

• One adjustable leveling leg

• Turn off and unplug the appliance and empty loads before adjusting or replacing legs
• Raise or tilt the appliance slightly using appropriate tools or a helper to access the mounting point
• Thread the leg in/out to adjust height, then confirm stability and even weight distribution on all legs
• If multiple legs are worn, replace all feet to maintain proper leveling and balance