Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Heating Element

Best Seller
Radiant Element
Genuine Ge part
By: Ge
Part Number: WB30T10099

The Radiant Element is an OEM part for GE ranges and cooktops. This part provides efficient and even heating for cooking. This part uses electricity to heat up and transfer warmth directly to the cookware. The radiant element is encased under the glass surface of the cooktop, offering a sleek and easy-to-clean cooking area while ensuring optimal heat distribution and cooking performance.

Causes of failure might include a burnt-out heating coil, damage to the element's electrical connections, or a malfunction within the control system that regulates power to the element.  

Symptoms of a bad Radiant Element include:

  • The element not heating up, leading to insufficient cooking temperatures.
  • Uneven heating, causing inconsistent cooking results.
  • The cooktop surface not responding or only partially heating, indicating a possible failure in the element's circuit.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Large dual burner   Frederick E. • Athens , AL • September 19, 2014

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

More
$109.46
Compare At:
$142.70
You Save:
$33.24

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Heater Kit
Genuine Speedqueen part
By: Speedqueen
Part Number: 964P3

The Heater Kit is an OEM replacement part for Speed Queen dryers. This kit includes the heating element, which generates the heat necessary to dry clothes during the drying cycle. Rated at 5350 watts and compatible with 240-volt systems, it ensures efficient heating for optimal drying performance.

Causes of a bad Heater Kit can include normal wear over time, damage due to power surges or electrical issues, or overheating caused by restricted airflow. Accumulated lint or obstructions in the venting system can also contribute to heater failure.

Symptoms of a bad Heater Kit include:

  • Dryer not producing any heat
  • Clothes taking significantly longer to dry
  • Burning smell during operation
  • Visible damage to the heating element or wiring

This OEM Speed Queen part is also compatible with Alliance laundry equipment.

Do-It-Yourself Stories from Customers like You Dryer would not heat up clothes not drying   Jerry W. • Greer , SC • September 17, 2025

Replace OEM heating element with the heater kit. Read more

More
$241.43
Compare At:
$287.30
You Save:
$45.87

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Heating Element & Housing Assembly
Genuine Ge part
By: Ge
Part Number: WE11X20397

The Heating Element & Housing Assembly is an OEM part for GE dryers. This assembly includes the heating element, which is responsible for generating the heat necessary to dry clothes, and its housing, which protects and supports the heating element.

Causes of a bad heating element and housing assembly can include overheating, electrical faults, or wear and tear over time. These issues can lead to inefficient drying or complete failure of the heating element.

Symptoms of a bad heating element and housing assembly include:

  • Clothes taking longer to dry than usual
  • No heat being produced during the drying cycle
  • The dryer shutting off unexpectedly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Needed a new heater element   Charles D. • Overland Park , KS • September 26, 2015

Found a video on UTube on how to dissamble the dryer. It was striaght forward and helpful. In the process I found an unusal amount of lint in the pipe from the dryer to the vent pipe to the outside It was nearly blocked about 10" up the pipe.. Read more

More
$144.95
Compare At:
$173.94
You Save:
$28.99

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Heating Element
Genuine Ge part
By: Ge
Part Number: WD05X35098

The Heating Element is an OEM replacement part for GE dishwashers. It is responsible for heating the water during wash cycles and assisting in drying dishes at the end of the cycle. The heating element ensures optimal cleaning and drying performance by raising the water temperature and promoting evaporation.

Over time, heating elements can fail due to wear, mineral buildup, or electrical issues. A malfunctioning element may result in poor cleaning or drying performance.

Symptoms of a bad heating element include:

  • Dishes remaining wet after the drying cycle
  • Water not heating adequately during the wash cycle
  • Error codes related to temperature or heating issues
  • Visible damage, such as cracks or corrosion on the element

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washer kept tripping the gfi.   Steven D. • Skillman , NJ • December 23, 2020

I replaced the heating element and it solved the problem. It was very easy to replace. Read more

More
$46.95
Compare At:
$56.30
You Save:
$9.35

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Bake Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10207398

The Bake Element is an OEM part for Whirlpool ovens, designed to provide consistent and even heating necessary for baking. Located at the bottom of the oven cavity, this element heats up when electricity is applied, radiating heat throughout the oven to bake food evenly. 

The most common cause of bake element failure is wear and tear from regular use. Over time, the element can burn out or become damaged, affecting its ability to heat properly. 

Symptoms of a failing Bake Element include:

  • The oven not heating up properly or taking longer than usual to reach the desired temperature.
  • Uneven baking results, with some areas of food undercooked or overcooked.
  • No visible glow from the bake element when the oven is turned on, indicating it isn't heating.
  • Physical signs of wear or damage on the element, such as blistering, cracks, or breaks.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven would only heat up to 347° f in bake mode   Chris M. • Scottsdale , AZ • October 25, 2021

I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the... Read more

More
$100.95
Compare At:
$120.13
You Save:
$19.18

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Element (3000/1400W) (Right Front)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11517959

The Surface Element is an OEM part for Whirlpool ranges. It is responsible for providing the heat necessary for cooking on the stovetop. Designed to fit seamlessly into the range, this element ensures even heating and efficient energy use, allowing for precise temperature control during cooking.

Causes of a bad surface element can include normal wear and tear, electrical faults, or damage from cookware. Over time, repeated heating and cooling cycles can cause the element to degrade, while physical impacts or spills can also lead to malfunction.

Symptoms of a bad surface element include:

  • Inconsistent or uneven heating
  • The element not heating up at all
  • Visible damage or burn marks on the element
  • Sparks or unusual noises when the element is turned on

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

 

Note: 3000/1400W - Left front element

Do-It-Yourself Stories from Customers like You Half of the burner was dead   Brian S. • Berlin , PA • November 28, 2017

Replaced the burner. Read more

More
$86.95
Compare At:
$115.48
You Save:
$28.53

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Oven Broil Element
Genuine Frigidaire part
By: Frigidaire
Part Number: 316203301

The Broil Element is an OEM part for Frigidaire ovens. This element provides the intense heat necessary for broiling, ensuring that food is cooked evenly and thoroughly from above. It's essential for tasks such as broiling meats, melting cheese, and toasting bread. The element measures 15 3/8 inches from the front to the mounting bracket. It measures 12-1/4 inches wide, and 3 1/4 inches from the bracket to the terminal end. The mounting holes are 11-1/2 inches apart.

You should replace the broil element if it becomes faulty or damaged. Causes of a bad broil element can include regular wear and tear, overheating, or electrical issues that prevent it from heating up properly.

Symptoms of a bad broil element include:

  • The broil element not heating up
  • Uneven heating during the broiling process
  • Visible damage or burn marks on the element
  • Sparking or unusual noises when the broil function is used

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You Top broiler element burnt out   William H. • Cooper City , FL • June 10, 2016

Removed old element , found the part on exploded view diagram of th oven. Got on appliance parts pro web site put in model number , made sure picture on line looked the same and ordered. While I was at it ordered a bottom pan for the oven that needed replacing. Received both parts 3 or 4 days later regular shipping. Installed both parts no problem . Thanks appliance parts pros. Read more

More
$135.42
Compare At:
$162.50
You Save:
$27.08

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Haliant Element
Genuine Ge part
By: Ge
Part Number: WB30T10126

The Haliant Element is an OEM part for GE ranges. It is a high-performance radiant heating element used in the stovetop, designed to provide consistent and efficient heat for cooking. This element heats up quickly and delivers precise temperature control for various cooking tasks.

Over time, the Haliant element can wear out due to repeated heating and cooling cycles, physical damage, or electrical issues. When the element becomes faulty, it can significantly impact the range's cooking performance.

Symptoms of a bad Haliant element include:

  • The burner not heating up
  • Uneven heating or hot spots
  • Visible damage or breaks in the element
  • The element cycling on and off irregularly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You The inner burner was not turning on when using the tri-ring burner   Christian M. • Herndon , VA • April 01, 2014

I purchased the replacement part after seeing how easy it was to fix by watching videos online. Read more

More
$165.29
Compare At:
$197.33
You Save:
$32.04

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Oven Bake Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74003019

This OEM Replacement Part is a bake element designed for Whirlpool electric ovens. It measures approximately 19 1/4 inches wide and 15 1/2 inches deep. The element extends about 3 inches past the bracket to the terminals. The element, positioned at the bottom of the oven cavity, supplies heat for baking. It features male spade connectors with push-on wire terminals. If your oven experiences uneven heating, lack of heat, or minimal heat during baking, replacing this part may be necessary.

Ensure the range is unplugged or the house circuit breaker for the range is shut off before installation. The element provides 2100 watts on 208 volts and 2800 watts on 240 volts. Removal involves unscrewing Phillips screws above the element brackets and detaching the wire harness without losing wires. Inspecting the wire terminals for any signs of arcing or burning during removal is recommended.

This part fixes the following symptoms
  • Little to no heat when baking
  • Oven not heating evenly
  • Oven is too hot
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Oven bake element stopped working   Belle K. • Anaconda , MT • August 29, 2014

I'm a 66 year old woman (on a fixed income) and I'd never before repaired an oven bake element . My stove is 20 years old but I still found it was much more affordable to change the bake element rather than buying a new stove. I called the number on the website and talked to a very informative woman. She answered all the questions I had about my stove. She told me about the repair video on the website which had step-by-step instructions. I ordered a new element - received it within 4 days.... Read more

More
$48.95
Compare At:
$58.74
You Save:
$9.79

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Elmnt-Brol
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760771

The Broil Element is an OEM part for Whirlpool ovens. This element is located at the top of the oven and provides the high heat necessary for broiling food.

Causes of a faulty Broil Element can vary. One indicator is visible damage like blistering, bulging, or breaks in the element. Another sign could be a lack of heat when the broil function is turned on, which might signal a burned-out element. If the element is constantly tripping the circuit breaker, it could point to an electrical issue.

Symptoms of a malfunctioning Broil Element include:

  • Food not broiling or browning properly.
  • The oven not reaching the set temperature or taking longer than usual to heat.
  • Unusual electrical odors or sparks coming from the element area during use.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Little to no heat when broiling
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Broil Heating element shorted.   Noel D. • Palmdale , CA • March 28, 2014

Found a real cool Youtube video by AppliancePartsPro.com. I watched it and learned how easy it was to unhook and replace the part with proper care and precautions. It even included tips on critical steps so the wires won't slip back inside the hole and save you from hours of possible mistake. Then I ordered the part. It came the day after, then I replaced the part, meaning, I DID THE WORK! (My wife was so impressed- lol) Easy as pie... but we made and had a much nicer roast the day after.... Read more

More
$87.22
Compare At:
$103.79
You Save:
$16.57

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Bake Element
Genuine Ge part
By: Ge
Part Number: WB44X10009

The Bake Element is an OEM replacement part for GE wall ovens and ranges. It produces the heat necessary for baking, broiling, and warming functions. Situated at the top or bottom of the oven cavity, the bake element converts electrical current into thermal energy for perfect cooking results.

Causes of a bake element issue can be normal wear and tear over time. The filament may also develop cracks or breaks that prevent it from functioning properly.

Symptoms of a bad bake element include:

  • Inadequate or uneven heating inside the oven
  • Browning/burning of foods occurs too quickly
  • Element does not glow red when set to bake
  • Oven fails to reach desired temperature

This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Oven not heating evenly
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You The baking element quit working....in fact it BURNT in half!!!! My stove is 15 years old and used everyday.   Marsh C. • Waterloo , IN • March 21, 2014

Checking for part replacement.....found your website.....I thought I had the right part, but called the tech/order line. Spoke to a very knowledgable tech, which she checked the stove serial # vs the part I thought I could use. The Tech advised that it WAS NOT and related the findings. I agreed after a short discussion and ordered the new element. The order was placed on Monday afternoon, on TUESDAY the FEDX truck pulled in with the replacement element!!!!!!! I watched the video offered on... Read more

More
$67.95
Compare At:
$81.54
You Save:
$13.59

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Element
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255401

The Element is an OEM part for Frigidaire ovens and ranges, designed to provide reliable and efficient heat for baking and broiling. This heating element converts electrical energy into heat, which is then distributed evenly throughout the oven cavity, ensuring that your food is cooked thoroughly and consistently. 

Causes of a bad Element can stem from normal wear and tear, excessive use at high temperatures, or a sudden electrical surge that can damage the internal components of the element. 

Symptoms of a bad Element include:

  • Uneven or insufficient heating, leading to undercooked food
  • The oven taking longer than usual to preheat
  • Visible damage to the element, such as blistering, cracks, or breaks
  • The element not glowing red when the oven is turned on, indicating it's not heating

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Burned out element   Sean B. • Raleigh , NC • August 27, 2016

Finding the part and getting took less than three days. Installing it was simple and took only a screwdriver and 10 minutes of my time . Read more

More
$192.95
Compare At:
$229.61
You Save:
$36.66

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Bake Element
Genuine Whirlpool part
By: Whirlpool
Part Number: 74004105

The Bake Element is an OEM part for Whirlpool ovens and ranges, designed to provide consistent and even heating for baking. This heating element is located at the bottom of the oven cavity and is responsible for the majority of the heat generated during baking, ensuring that your dishes are cooked thoroughly and evenly. 

Causes of a bad Bake Element can range from normal wear and tear to excessive use or a sudden electrical surge that can damage the internal components of the element. 

Symptoms of a bad Bake Element include:

  • Lack of heat in the oven 
  • The element not glowing red when the oven is turned on 
  • Visible damage to the element, such as blistering, cracks, or breaks
  • Uneven cooking or baking results 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Lower oven would not heat up on maytag gemini electric range   Jason B. • Boylston , MA • October 19, 2014

Replaced lower and upper element. Internet research suggested it was the control board. Thankfully it was a much quicker and cheaper fix. Read more

More
$74.61
Compare At:
$89.53
You Save:
$14.92

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Bake Element
Genuine Ge part
By: Ge
Part Number: WB44X45494

The Bake Element is an OEM part for GE wall ovens and ranges. It generates the necessary heat through a series of exposed coils to bake and brown food consistently.

Symptoms of a failed bake element include:

  • Inability to reach or maintain proper baking temperatures
  • Burned-out coils causing uneven or sporadic heating
  • Error codes relating to sensor detection of element issues
  • Premature element failure can create a hazardous smell or smoke

Causes may be normal wear of the coil material over many use cycles in high heat. Without a functioning bake element, the oven cannot reliably or safely perform its baking function.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You GE range bake element exhibited hot spots   Gary P. • Milo , IA • November 26, 2019

Replaced element. The new element was perfect. The shipping was perfect. Installation would have taken less than 10 minutes if the two range wires attaching to element had been 1 inch longer. Attached thin nosed vice grips to wires at spade terminals to facilitate attachment to element. The repair was simple enough but it would have been perfect if GE engineers had made wires 1 inch longer. Read more

More
$65.95
Compare At:
$79.14
You Save:
$13.19

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Oven Heating Element
Genuine Ge part
By: Ge
Part Number: WB44X5099

This GE oven heating element is an OEM part for GE wall ovens and ranges. The element measures 18” wide x 15 1/2” deep With 1-1/2 inches from the mounting bracket to the end of the terminals that are screw-type. It generates 2585 watts at 240 volts or 1940 watts at 208 volts of heat within the oven cavity. 

Symptoms of a bad heating element are:

  • Inadequate or uneven baking with cold spots
  • The oven taking excessively long to preheat or maintain set temps
  • Tripped circuit breakers indicating element failure

Causes of a bad heating element include deterioration of coil insulation from sustained exposure to temperatures upwards of 500°F. Normal wear reduces heat output over many years of use.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This part fixes the following symptoms
  • Oven is too hot
  • Oven not heating evenly
  • Won't start
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Baking element broke broiler never worked since I moved in 13 years ago and the four burners on the stove top were slowly dying   Marybeth K. • Milltown , NJ • November 13, 2017

With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more

More
$42.95
Compare At:
$56.01
You Save:
$13.06

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Heater
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304535760

The Heater is an OEM replacement part for Frigidaire dryers. It is responsible for generating the heat necessary to dry clothes efficiently during the drying cycle. The heater works in conjunction with the dryer’s thermostat and other components to maintain the appropriate temperature for optimal performance.

Over time, the dryer heater can fail due to wear and tear, electrical issues, or overheating caused by restricted airflow or clogged lint filters. A malfunctioning heater will prevent the dryer from achieving the temperatures needed for effective drying.

Symptoms of a bad dryer heater include:

  • Clothes remaining damp or wet after a full drying cycle
  • The dryer not producing any heat during operation
  • Unusual smells, such as burning or overheating odors
  • Error codes indicating heating issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not heat   Geroy M. • Portsmouth , VA • February 09, 2019

After following troubleshooting steps on the website verified the heating element assembly needed replacing. Since I had to breakdown the entire unit to get to it took the time to clean lint, dust and other buildup from inside and replaced other fuses also. Ordered and replaced the heating element assembly, control thermistor, thermostat, and inlet thermal fuse. Very easy repair following the provided videos on the site. Read more

More
$75.62
Compare At:
$89.99
You Save:
$14.37

IN STOCK
Ships Monday Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store