Need Help?
Call or text
White plastic timer knob for dryer control panel. Replaces cracked, broken, or stripped knobs that prevent you from selecting drying cycles.
The thermostat knob on my dryer broke and I couldn't find it in any of the stores in my area. I looked online and it was very expensive. I found your website when I went to Lowes. The gave me a card with your site. The knob was very reasonable, came within a week and I was able to put it on in a second! It was a very rewarding experience. Read more
Replacement timer control knob assembly for washers. Installs on control panel to select cycles and settings. Needed when knob is cracked, broken, worn, or won't grip timer shaft.
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more
Replace a cracked, broken, or missing control knob on your washer or dryer. This plastic dial installs on the front control panel for cycle selection.
Found the part through appliancepartspros.com The part was the cheapest of several web sites. although shipping for such a small part was steep ($7.95 If I was purchasing bigger parts or heavier parts..the flat rate cost would be a bargain. The part arrived the next day and fit perfectly. In additon; obviously the original manufactured part was not holding up well as the new part had a metal reinforcement band that will prevent the cracking in the future. Read more
Timer knob assembly for dryers. Mounts on the control panel timer stem. Replace if knob is cracked, broken, stripped inside, or missing for proper cycle control.
I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more
Control knob and clip assembly for dryer or washer. Attaches to control shaft to set cycles and settings. Replace if cracked, broken, or missing.
Replaced rear bearing, upper and lower felts, drive belt. Have repaired dryer before for same problem years ago, knew what to do, on line diagrams helped to move memory. Cleaned all accumulated lint out of machine.Belt was changed only out of age.Looked good but thought to be on safe side. Read more
The Control Knob with Clip is an OEM part for GE washing machines and dryers. This knob allows users to select and control various settings and cycles on their appliance with ease. Causes of a bad Control Knob with Clip can include constant use leading to wear and tear, accidental impacts that may crack or break the knob, or exposure to harsh cleaning agents that can cause the knob's material to degrade over time. Symptoms of a bad Control Knob with Clip include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I first received the quality parts in less than 2 days. It took me 5 minutes to change out the timer and 2 of the minutes were finding where my fiancée put the Phillips head screwdriver. Unplug dryer first, remove top three screws from back panel. Pull old timer up and out, have new timer in hand and transfer one wire at a time. Once all wires are transferred, snap the new timer in its place. Replace your three screws, put knob on timer. Plug in dryer and test. Once completed, cleanup your... Read more
Replacement timer knob for dryer control panels. Installs on the timer shaft to set drying times and select cycles. Order if original is cracked or broken.
Live chatted with AppliancePartsPros to verify the correct replacement part. Ordered on line and received the knob the following day! So easy and saved $15. Read more
Replace cracked, melted, or peeling burner control knobs on your range. This plastic knob installs on the control shaft to adjust heat settings.
Went to the AppliancePart Pros website, found the OEM replacement parts and at a price that was better than any of the other sites I had looked into. Ordered the parts and they arrived within 2 days. Excellent service. Read more
Timer dial knob for washers. Installs on control panel to select wash cycles. Replace if knob spins freely, teeth are worn, or it won't engage cycles.
Timer knob assembly for dryers. Installs on the control panel to operate the timer dial. Replace if cracked, broken, stripped, or won't grip the shaft.
Remove and replace Read more
The Burner Knob is an OEM replacement part for GE ranges. It serves as the primary control for adjusting the heat output of individual burners.
Causes of a faulty burner knob can include wear over time, physical damage, or issues with the internal valve or wiring connections.
Symptoms of a need to replace the burner knob:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
So, after looking for replacement parts, I found these. I was delighted. My original knobs were plastic with a silver finish. They had blistered from the heat of the stove over the years. The replacement knobs were all metal. Price was right. Very happy. Read more
Replacement timer knob assembly for washers. Installs on the control panel timer shaft. Needed when original knob is cracked, broken, or missing.
Easily replaced the knobs Read more
The Humidity Control is an OEM part for GE refrigerators. This component regulates the humidity levels within the crisper drawers, ensuring optimal conditions for preserving the freshness and longevity of fruits and vegetables. By controlling the humidity, it helps to prevent produce from drying out or becoming too moist.
Causes of a bad humidity control can include mechanical failure, damage from spills or impacts, and wear and tear over time. Additionally, issues with the connecting cables or electronic controls can also lead to malfunction.
Symptoms of a bad humidity control include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced two drawers, one shelf front, and the grille base Read more
The Selector Knob is an OEM part for GE washing machines. This knob is used to choose different wash cycles and settings on the control panel, allowing users to customize their laundry preferences. It is designed to fit securely onto the control shaft and provide smooth operation for selecting various options.
Over time, selector knobs can wear out or become damaged due to frequent use or accidental impacts. Causes of a bad selector knob can include cracked or broken plastic, stripped or worn-out internal components, or a loose fit on the control shaft.
Symptoms of a bad selector knob include:
I ordered a new knob and it arrived very quickly. The repair was simple and I will use appliance parts pros again should I need to. Thank you. Read more
Dryer timer knob control for selecting drying cycles. Replace if your original knob is cracked, broken, stripped, or missing from the control panel.
Amazing story of speed & quality! Ordered on Friday 4pm, had parts in hand on 2pm on Sat, finished repair by 4pm ... 24hrs! The repair video was 100% on target. Replaced the rear drum bearing, front slides/glides, and the belt (cheap insurance!). All parts were exactly as described on APP.com. I (and my wife) couldn't be happier with the repair, and the exceptional service of APP! Do not be timid about trying this repair yourself. Take your time and watch the video. Priceless! Recommend... Read more
Burner control knob for gas ranges. Installs on the control panel to regulate cooktop temperature. Replace if cracked, broken, or worn from heat and use.
I bought the replacement knobs from Appliance Parts Pros.com and they were much better knobs that what originally came with the unit. They are actually metal and the plastic posts that connect with the range are a much higher grade plastic. To be honest I think the stove works better than it did when it was new. Some of the original knobs may have been broken when we purchased the unit. Replacement took under 5 minutes for all of the knob. Oh....and by the way....they appear to be the same... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.