Need Help?
Call
The Dishrack Track (Right) is an OEM part for Whirlpool dishwashers. It is responsible for supporting the third-level dishrack and allowing it to glide in and out smoothly during the loading and unloading process. This track is designed specifically for the right side of the third-level rack.
Causes of a bad track include damage from heavy use over time, such as dulling or bending of the metal track surface from repeated loading/unloading of dishes. Debris or residue buildup along the track can also cause issues.
Symptoms of a bad track include:
This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Controls drum movement and reduces vibration during the spin cycle. Replace if worn, cracked, or causing excessive bouncing to restore stability.
Removed the rear panel, top lid and found burnt belt and what appeared to be worn out plastic dampers/shocks on bottom of drum. I had called several repairmen and they were all 7-10 days behind. I live in a small town, 60 miles from a metro area and there are very few qualified techs to work on my washer dryer, i was told. A Google search found this site and i was able to EASILY FIND the parts I needed and they WERE IN STOCK. I hoped to get the parts quick and even paid for next day delivery,... Read more
Suspension rod for top load washers. Supports the tub and absorbs vibrations during wash and spin cycles. Replace if cracked, bent, or worn from use.
My less than 2-year-old Frigidaire washing machine started to spin violently on the final spin. Thanks to appliance parts pro I was able to find the diagrams and parts easily. I ordered the parts I needed and they arrived quickly in a couple of days. I was able to repair the machine for about half the price in probably would have been if I had a repair service do the work. Read more
Secures the upper spray arm assembly in the dishwasher tub. Replace if cracked, broken, or worn causing the spray arm to droop or become misaligned.
Replaced wash arm mount Read more
Covers and protects the dishwasher pump assembly. Replace if cracked, broken, or if plastic guides are stripped causing spray arm support issues.
The cover was easy to remove with 3 star head screws. I entered my model number on AppliancePartsPros.com dreading the cost I was about the encounter. However, the parts were very cheap, in stock, and shipped within an hour of my order. I had a question about the tracking number and received an email back in less than an hour. The cost for both parts and standard shipping was under $30. Once I received the parts, the new cover was installed, the rest of the assembly was put back back... Read more
Replaces a cracked or broken front drawer support on your range. This plastic guide installs on the front of the warming drawer to stabilize movement.
Ordered new part & snapped into place. Read more
Suspension rod absorbs shocks and reduces vibration in top-load washers. Replace if worn, damaged, or causing excessive movement during spin cycles.
This damper (shock absorber) assembly mounts between the washer's outer tub and the base frame to absorb vibration during the spin cycle. It helps keep the tub centered and reduces excessive movement and noise. Replace this part if your washer shakes violently, walks across the floor, or makes loud banging sounds during spin, especially with unbalanced loads.
Support bracket that holds the crisper drawer cover in place. Replaces broken, cracked, or missing supports to restore drawer stability and function.
I ordered the shelf from the website at around 3:00 in the afternoon. To my surprise it was at my doorstep at 10:00 the next morning. I opened the box and put the new shelf in and my refrigerator was like new except for a door shelf that I still needed to replace. I was so pleased with my order that I checked out the part number and ordered the door shelf immediately.....again the next dayit was at my door by 10:00 in the morning. It was so amazing that I had to check out the address only... Read more
Dishrack track rail for dishwashers. Mounts inside tub to guide rack smoothly in and out. Replace if cracked, broken, or causing rack misalignment.
Mounts in the washer's drive mechanism to support the shift fork. Replace if the assembly is cracked, broken, or worn to restore proper gear shifting.
Replacement drawer support bracket for your range's storage or broiler drawer. Installs on the drawer rail to prevent sagging, crooked alignment, or binding.
Secures the middle wash arm manifold tube in your dishwasher. Replace if cracked, broken, or split from age or heat damage. Installs on manifold tube.
Good but it says the tube holder doesn't come with it but it actually does Read more
Mounts the mid-level spray arm to its supply tube. Replace if cracked, worn, or broken to keep the spray arm centered and spinning freely on the rack.
The middle sprayer sheared off our GE Power 3 dishwasher, ruining the hub in the process. We removed the rack from the dishwasher to make it easier to access the sprayer hub, otherwise it's awkward. The biggest challenge was finding the right tool in our garage (we used a 1/4" wrench as we did not have the right socket size). Once the screw was removed, it was quite easy to remove the hub and attach the new one. The rest was simply attaching the new sprayer to the hub using the included... Read more
The Shock Absorber is an OEM part compatible with Whirlpool washing machines. It is a crucial component that helps reduce vibrations and dampens movement during the spin cycle. The shock absorber absorbs mechanical stresses to prevent the washer tub, suspension springs, and other components from wearing out prematurely.
Causes of a bad shock absorber include wear and tear over time, cracks or breaks from heavy loads, or damage due to impact.
Symptoms of a bad shock absorber include:
This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Secures the upper spray arm to the water feed. Replace if cracked, broken, or loose to restore proper arm alignment and rotation for the top rack.
Replaced all leaky parts including the wash arm that send water to the top rack. Most parts are just snap-in and one required a single screw. Very easy job. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.