Valve

Removed burners, grates, removed cook top,took screws out from raised trim and wells for burners. Removed electric connection for burner igniters and took gas connection off of valve that goes to burners. Took out screw that holds in gas valve in gas manifold. Replaced gas connections to burners on new valves, installed new valves and trim . Read more

I put in a new water valve Read more

Replaced valve. Paid extra to have it as soon as i could, but it took a week to get here. Read more

This is my go-to site to fix the appliances around the house. The pressure regulator behind the stove was leaking and some of the burner valves would not shut off completely. I ordered the parts here and was able to replace the old parts quickly. Now the stove works as it should with no leaks. Thanks, AppliancePartsPros.com! Read more

Removed cover from icemaker, unplugged refrigerator and tested with meter. Coil of water inlet valve tested open. Ordered part and replaced. Works like a charm. Read more

• Will not fill with water

After researching on line I was able to narrow down the problem to either the cold water of hot water fill valve. These valves are electronically controlled and can go bad thus causing the washing machine to not fill properly. Nf stands for "no fill". I replaced the cold water valve first which was held by two screws and a couple of wires. It literally took me 5 minutes to replace the part. As soon as I started the wash cycle I could tell I had fixed the problem because the humming noise that... Read more

• Little to no heat when baking
• Gas igniter glows, but will not light

From the Appliance Parts website I watched a 3 minute Youtube video. The video actually explained the process on another range but it was enough information for me to do the project myself. The part came 2nd day UPS and I installed it in under an hour. The only hitch was that I didn't see the note (maybe it wasn't there) that explained how the valve is set for Natural gas and that for LP gas I'd need to adjust the jet that goes into the burner tube. Maybe that was on the video. Read more

Watched your repair video and replaced valve in 15 minutes. Read more

• Not dispensing water

Purchased a new valve online, and installed it myself. Removal of the old valve was very simple. I had to slightly modify the water lines to accommodate the new valve. Read more

Bought a new water valve assembly Read more

After researching on line I was able to narrow down the problem to either the cold water of hot water fill valve. These valves are electronically controlled and can go bad thus causing the washing machine to not fill properly. Nf stands for "no fill". I replaced the cold water valve first which was held by two screws and a couple of wires. It literally took me 5 minutes to replace the part. As soon as I started the wash cycle I could tell I had fixed the problem because the humming noise that... Read more

Replace the motherboard and used YouTube to replace float switch. Part ordered was exactly what I needed Read more