Need Help?
Call
Washer won't fill or water leaks? This water inlet valve assembly controls water flow during wash cycles. Common DIY repair, typically 30-45 minutes.
Replaced water inlet valve assembly Read more
Fix a washer that won't fill with cold water or continuously runs with a new inlet valve. DIY-friendly repair, typically takes 20-30 minutes to replace.
Removed valve and replaced with new one. Read more
The Water Inlet Valve is an OEM part for GE washing machines. It controls the flow of water into the washer during the fill cycles. The valve opens and closes to allow the correct amount of water to enter the machine based on the selected wash cycle and settings.
You should replace this water inlet valve if it becomes defective. A bad water inlet valve can cause several issues such as improper water levels, slow filling, or no water entering the washer at all. These problems can be due to sediment build-up, electrical faults, or mechanical wear.
Symptoms of a bad water inlet valve include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I reseached these error codes and compared them to others problems. After deciding that I was gonna order the part and fix it myself I was at ease to find out it took 10min to fix! And it actually worked! The washer was pausing during cycles, cloths were soaking wet, spin cycle only worked on drain and spin at the end of the Ioad (it would spin slowly otherwise), soap dispenser still had the soap in it or it would be filled with water after the cycle was over. I watched videos on how to change... Read more
Fix a washer that won't fill with water or shows F-20 error code. This water inlet valve controls hot and cold water flow during wash cycles.
Remove the top panel by removing 3 hex nuts on the back of the washer. Inlet valve was located right underneath the panel towards the back. Remove one screw using a t20 bit and unplug the 2 plugs located on the valve. With a pair of pliers removed a tension clamp and the valve comes right off. Read more
Washer not filling or filling slowly? The water inlet valve controls water flow into your machine. Common DIY repair takes 30 minutes with basic tools.
Replaced the water valve. Easy repair. The repair video was spot-on. Tools needed: Slip joint pliers for removing and attaching the hoses and moving the hose clip. 5/16 nut driver. Phone to take a picture so I could get the wires put back right. Shut off the water and unplug from power. Remove the hoses. Using a 5/16 nut driver remove the single screw that holds the bracket, lift bracket slightly and pull from the washer. There is a little slack in wires and fill hose to work with. Take a... Read more
Fix washer that won't fill, overflows, or fills slowly. This water inlet valve controls water flow into your washer. DIY-friendly repair with video guide.
Watched your repair video. Ordered the part. Fixed it! Read more
Fix a washer that won't fill, has an F20 error, or leaks water between loads. This water inlet valve controls flow during fill cycles. DIY repair.
Saw the drip, ordered the part. Unplugged machine from wall. Torx bit on my DeWalt cordless drill to remove the screws securing the lid to the machine, lifted off top cover. Turned off water supply and removed the water supply hoses from back of the machine, used needle-nosed pliers to remove spring clamps from the defective part, removed mounting screw for defective part at rear of machine. Worked the defective part out of mounting, unplugged the three electrical connectors. Then, plugged in... Read more
Fix NF, OE, or 4E error codes on your washer. This water inlet valve controls water flow into the drum. DIY repair takes about 15 minutes.
The error code implies a faulty fill valve. This was not the case for me. Replacing the main PCB assembly solved the problem. I have run two full loads since the repair with no problems. Read more
Fix washer overfilling, continuous filling, or F8 E1 error codes with this water inlet valve. DIY repair typically completed in under 45 minutes.
Replaced water inlet unit. Read more
Fix low flow error codes or slow filling with this washer water inlet valve. Controls water flow into the tub. Takes about 10-20 minutes to install.
Replaced both hot and cold water inlet valves. Works like a charm, issue resolved. Read more
Water won't shut off or keeps filling when washer is unplugged? Replace the water inlet valve. Easy 30-minute DIY fix for most models. Video available.
Ordered a new inlet water valve . Super fast delivery ordered on a Wednesday afternoon was here Thursday morning , standard shipping , I was impressed !! Removed the old valve , installed the new , checked for leaks no issues , washer is back on line and my Honey is very happy with me . Read more
Fix LF error codes, slow filling, or no cold water issues. This washer water inlet valve controls water flow into your machine. DIY repair in 15-20 minutes.
I ordered this new valve, and voila!!! No more using up all the hot water to wash everything. Now I can do all of my laundry with cold water, like I prefer to. Read more
Fix a washer that won't fill, fills slowly, or leaks at the water connection. This inlet valve controls water flow into the tub. Easy DIY repair.
Replaced broken part with new part. Easy peasy. Read more
Washer slowly filling or dripping when off? A faulty vacuum break allows water to siphon back into the drum. Takes 30 minutes with our video guide.
My 15 year old whirlpool washer top was rotting away and my wife was about to buy a new one. a 1 min search on google brought me to this site and within 5 mins found all the parts I needed, Received my order in 3 days and now we're back in business for a total cost of $159 instead of $500 to $600. Will use this site again and have told a few people already. Thanks Rob Read more
The Hot Water Inlet Valve is an OEM part for Bosch washing machines. It regulates the entry of hot water into the machine, crucial for cycles requiring warm or hot washes. Activated by the machine's control system, this valve opens at the precise moment to allow the correct amount of hot water to mix with the cold, ensuring the selected temperature setting is accurately achieved.
The causes behind issues with the hot water inlet valve often include sediment build-up from hard water, wear and tear from regular use, or electrical failures preventing the valve from operating.
Symptoms of a malfunctioning Hot Water Inlet Valve include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
I wanted to only mess with the washer in a single 30-minute session. So, I assumed both solenoid valves were leaking and purchased replacements. It was a simple project, as well as a good chance for my 13-year-old son to accomplish something practical. Steps/tools used, in order: STEP/TOOL 1: Pull the washer electrical plug from the wall; no tools needed. STEP/TOOL 2: Shut off the hot and cold supply hose valves in the wall; no tools needed. STEP/TOOL 3: Unscrew the hot and cold water female... Read more
Fix no hot water, leaking when washer is off, or weak water pressure. This triple water inlet valve controls hot, cold, and warm water flow. DIY-friendly repair.
Replaced solenoid valve. Repair summary: Turn off H/C water supply, disconnect hoses. Unscrew 3 screws rear of main panel. Slide front panel laterally then pull up to remove. Unscrew 2 screws on solenoid valve part. Disconnect spade electrical connectors and remove defective part. Insert new part and do everything I just said in reverse. It was so easy a drunken monkey could have done it. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.