Search Results

This agitator cam is the replacement cam that fits under the washer agitator to engage the transmission and help transfer motion. Replacing a worn or broken cam restores secure agitator engagement for reliable washing action. What it does:

• Locks the agitator to the drive so the agitator oscillates and reverses during wash cycles
• Replaces a damaged or worn cam that can cause the agitator to slip, spin freely, or fail to agitate
• Works with the agitator assembly and dogs to maintain proper drive engagement
• Restores proper mechanical linkage between the agitator and the washer transmission

• Disconnect power and water supply before beginning any repair
• Remove the agitator, inspect agitator dogs and splines for wear, and replace if needed
• Install the cam into the agitator and reassemble in reverse order of removal following the OEM service instructions
• After reassembly, run a short test cycle to ensure the agitator engages and functions correctly

This washer agitator is the flex-vane style used in select top-load models. It drives the wash action by rolling clothes through water and detergent. Replacing a worn or cracked agitator restores proper turnover and reduces slippage or noise.

• Transfers drive motion to move water and fabrics during the wash cycle
• Flexible vanes promote load turnover for consistent, thorough cleaning
• Common symptoms of failure: no or weak agitation, clothes not circulating, visible cracks or broken fins, unusual noise, or a loose/wobbly agitator
• Designed to replace the original flex-vane agitator on compatible units

• Unplug the washer and turn off water supply before servicing
• Remove the fabric softener dispenser and agitator cap; remove the center bolt, then lift the old agitator off the splined shaft
• Align the new agitator on the drive hub; reuse the original bolt and cap, and tighten securely
• Run a short test cycle to ensure smooth agitation

This washer agitator assembly mounts on the drive shaft and creates the back-and-forth wash action that moves laundry through water and detergent. Replacing a worn or cracked agitator restores proper turnover and cleaning performance.

• Attaches to the drive shaft/transmission to produce the oscillating wash action
• Circulates clothes for even cleaning and reduced tangling
• Replace if the washer won't agitate, the agitator free-spins or slips, laundry stays on top, or it's visibly cracked/loose
• Can also help address squeaking, clicking, or grinding caused by a damaged agitator

• Unplug the washer and turn off water supply; wear cut-resistant gloves
• Remove the dispenser/cap if present, then the inner cap; take out the retaining bolt or nut
• Lift the old agitator straight up; if stuck, rock it gently to free it without damaging the tub
• Align the new agitator with the drive splines, press down fully, reinstall fastener and cap, then run a short cycle to ensure proper agitation

This agitator mover is the upper auger section of a dual-action agitator. It ratchets in one direction to drive clothes downward for proper turnover, helping restore effective wash action when the original mover is worn or damaged. What it does:

• Creates the one-way, ratcheting motion of the agitator's upper section
• Helps circulate and roll laundry downward for thorough turnover
• Common symptoms of failure: weak agitation, top auger not advancing, clicking/slipping sounds, or visible cracks/stripped splines
• Needed after damage from overloading or long-term wear

• 1 agitator mover (upper auger)

• Disconnect power and turn off water before servicing
• Remove the fabric softener dispenser and agitator cap; take out the center retainer/bolt to access the mover
• Lift off the old mover and seat the new mover fully on the agitator
• Reinstall the retainer/bolt and cap; verify smooth ratcheting action before use

The Infusor Assembly is an OEM part for GE washers. It is responsible for efficiently infusing water into the tub during wash cycles. With a sophisticated internal design, the infusor helps to fully saturate laundry with water in a uniform, controlled manner.  

Causes of a bad infusor assembly can include mineral or limescale buildup interfering with water flow, cracks or breaks in the plastic from repeated use, or damage from large items lodged inside.

Symptoms of a bad infusor assembly include:

• Uneven or inadequate water levels in the tub during fill  
• Reduced water pressure 
• Leaks or water dripping from the assembly area

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

PC-144 agitator that moves and tumbles clothes during wash cycles to help loosen soil and distribute water and detergent. Replacing a worn or damaged agitator restores proper wash action and improves cleaning performance. What it does:

• Uses fins/paddles to lift and move garments so water and detergent reach fabric fibers for better cleaning.
• Promotes even water circulation and load movement to reduce tangling and bunching.
• Common service reasons: cracked or broken fins, missing or worn agitator, noisy operation, excessive vibration, or clothes not coming out clean.
• Designed for top-load agitator-style wash systems that use the PC-144 agitator design.

• Disconnect power (unplug) and turn off water before starting any repairs.
• Typical replacement requires removing the existing agitator cap and any retaining hardware, then sliding the agitator off the drive post and installing the new unit; procedures vary by model—refer to your model's service manual or diagram.
• If a retaining bolt or special fastener is used on your model, have the correct socket or tool ready; follow manufacturer guidance for proper securing.

This impeller cap fits over the dishwasher's wash pump impeller to secure it in place and help maintain proper water flow and spray pressure for effective cleaning. Replacing a cracked or missing cap can reduce noise and restore consistent performance.

• Secures the wash pump impeller and helps prevent wobble or rubbing
• Helps maintain proper water circulation to the spray arms
• Common symptoms of a failed/missing cap: poor cleaning, unusual grinding/rattling noises, or visible damage in the pump area
• Designed for the specific pump/sump design used on select models

• Disconnect power and turn off water supply before servicing
• Access the pump from inside the tub; remove the lower rack, spray arm, and filter/cover as required
• Note cap orientation; press or twist-lock fully onto the impeller (reuse any existing fastener if your model uses one)
• Inspect the impeller and seals while accessible; replace worn parts as needed

This is the washer's agitator assembly with a built-in filter. Replacing a worn or damaged agitator restores proper turnover of clothes and helps capture lint during the wash for cleaner results.

• Drives the back-and-forth wash action that circulates and rolls laundry
• Integrated filter helps collect lint and debris from wash water
• Worn fins or a stripped hub can cause weak or no agitation and poor cleaning
• A missing/damaged filter may lead to excess lint on clothing

• Disconnect power before servicing; turn off water supply for safety.
• Remove the softener cup/center cap; take out the center bolt or retainer if equipped.
• Lift the old agitator straight up; align splines and press the new agitator fully into place.
• Reinstall the fastener and cap; run a short cycle to confirm proper agitation.

This replacement upper agitator restores the laundry-moving action in compatible top-load washers so clothes get cleaned and rinsed more evenly. It installs on the transmission/drive coupling to re-enable proper agitation. What it does:

• Moves clothes and water during the wash cycle so detergent and water contact fabrics for better cleaning.
• Replaces a cracked, stripped, worn or missing agitator that can cause poor cleaning or uneven loads.
• Helps stop wobbling, banging or unusual noise caused by a loose or damaged agitator.
• Works with the washer's drive coupling/drive block to transfer motor motion into agitation.

• Disconnect power and water before starting any repair.
• Remove the agitator cap or fabric softener dispenser, then unbolt/lift the old agitator from the drive coupling per your model instructions.
• Inspect the drive block/agitator dogs and splines for wear; replace those parts if they are damaged to ensure proper operation.
• After installation, run a short test cycle to confirm secure fit and normal agitation.

Impeller cap that fits over the pump impeller to protect moving parts and help maintain proper water circulation. Replacing a cracked or missing cap helps reduce leaks and restore reliable pump performance. What it does:

• Covers and protects the pump impeller from debris and direct contact.
• Helps maintain correct water flow and impeller alignment inside the pump housing.
• A damaged or missing cap can cause reduced circulation, noisy operation, or leaks near the pump area.
• Small, inexpensive replacement that can prevent further pump damage when installed promptly.

• Disconnect power (and water if applicable) before accessing the pump area.
• Access may require removing an access panel or lower kick plate; keep fasteners and panels organized.
• Press the cap onto the impeller until fully seated; avoid forcing if resistance indicates other damage.
• Inspect the impeller and nearby seals while replacing the cap; replace the pump assembly or seals if they show wear.

This cam-agitator is the replacement cam that guides the agitator's motion in compatible top-load washing machines, restoring proper agitation and helping the washer move clothes through the wash cycle effectively. What it does:

• Replaces the worn or broken agitator cam that controls the agitator's directional movement.
• Helps restore normal agitation when the agitator slips, spins freely, or fails to shift between wash and spin.
• Works with the agitator assembly to transfer drive action from the transmission to the agitator.
• Designed to fit and align with the agitator and related fasteners for reliable operation.

• Basic mechanical skill and common hand tools required; your machine's service manual for model-specific guidance.
• Disconnect power and water supply before beginning repairs to avoid shock or injury.
• Inspect related parts (agitator, dogs, bolt, and spline) and replace if worn to prevent repeat failure.

This is a washer agitator assembly. The agitator is an important part of the washing machine. It's the part that moves the clothes inside of the washing tub to help get them clean. it does this by rotating back and forth. If clothes aren't coming out of the washer clean, the agitator may be damaged. If it's cracked, it could also cause damage to the clothing.The washer agitator is made from durable plastic, but it can start to wear down and break with extended use. It could crack and chip. Misusing the machine could also cause it to break prematurely.This washer agitator will work with models from Kenmore, Whirlpool, and Maytag. The part is sold individually. It is a genuine OEM replacement part.

This is the upper agitator that moves laundry through wash water for improved cleaning and rinsing in compatible top-load washers. Restores scrubbing action to help remove soils and distribute detergent. What it does:

• Rotates to move clothes through water, improving mechanical cleaning
• Helps circulate water and detergent for more even washing
• Can reduce clumping and help prevent tangling during the wash cycle
• Common symptom: washer fills and runs but clothes remain heavily soiled or not evenly cleaned

• One upper agitator

• Disconnect power and water supply before starting any repair
• Remove fabric softener dispenser and agitator cap to access mounting bolt
• Tighten to manufacturer torque and ensure proper alignment before testing
• If agitator uses a cam or drive dogs, inspect those components and the agitator spline for wear and replace if damaged

The Wash Plate is an OEM part for Whirlpool washing machines. Located inside the washer tub, the wash plate works with the agitator to gently push clothes up and down in the water during the wash cycle.

Due to the force of the agitator rubbing against clothes, wash plates can wear down over time and use. Microscopic cracks or chips in the plastic material allow contaminants to lodge underneath and cause abnormal vibrations and noises.

Symptoms of a bad wash plate include:

• Excessive shaking or vibrating
• Loud clunking or grinding noises
• Leaks around the tub seal
• Damage or cracks visible on the wash plate surface

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.