Search Results

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

Dryer drum shaft that supports the drum and connects to the bearing. Replace if worn, damaged, or causing squeaking noises. Verify fit with your model.

This ball bearing consists of an outer and inner race, balls, and shield. The primary purpose of this ball bearing is to allow the mandrel assembly to rotate. The mandrel assembly should move as smoothly as possible since the blade or spindle relies on this component to function. After extensive use, the ball bearing will fail. Typically, a broken ball bearing will squeal before it completely fails. If the warning noise is ignored, the bearing will eventually cease or break down completely. Often when the bearing completely fails, it will not only damage the mandrel but the mandrel housing as well. If so, a more expensive mandrel assembly replacement will be needed. The tools needed to replace a mandrel's ball bearing include a screwdriver set, nut driver, mallet, and wrench. It is recommended to remove the spark plug to prevent unintentional engine start-up. To reach the mandrel assembly, remove the spindle assembly from the body. Then, take out the carrier plate, guard, mounting assembly, and the pulley. This genuine ball bearing replacement will work with snowblowers, trimmers, tractors, and mowers made by Husqvarna, Weed Eater, Poulan, Craftsman, and Murray. This brand-new bearing is sourced from Husqvarna. It is sold individually.

Plastic wheel bushing enables smooth wheel rotation on lawn tractors. Replace if wheels wobble or don't turn smoothly. Verify fit with your model number.

Steering bushing kit holds the steering wheel shaft securely on your lawn tractor. Replace if steering feels loose or wobbles. Confirm fit with your model.

This steering bushing is a genuine MTD part, sold individually. This steering bushing can be used as a replacement part in a lawn mower. The purpose of the steering bushing is to mitigate and prevent the excessive vibration and shocks that could result from the steering wheel during the operation of the lawn mower.The steering bushing in a lawn mower might have to be removed and replaced by this genuine OEM replacement part if it can no longer serve its function of minimizing vibration. It is a simple replacement process that will require only basic tools to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steering bushing is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, Ariens, and Dixon.

This is an auger shaft bearing that is used on many snowblowers created by Husqvarna. The auger shaft bearing connects to the auger plate. A bearing helps the shaft rotate easily inside of a snowblower. Through use or time, the auger shaft bearing can become damaged or break and will need to be replaced. If the bearing is damaghed, it can cause vibrating, wobbling, or binding and may prevent the shaft from rotating. Failed bearings also sometimes create a squealing sound coming from the snowblower.If any of these things are occurring with a snowblower, the auger bearing will need to be replaced. Place the blower on a flat, stable surface and disconnect the spark plug wire before beginning. The belt cover and auger belt will need to be removed along with the roller bracket. Remove the auger housing to get access to the auger shaft bearing to replace it. Reassemble the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual unit. The auger shaft bearing is made to be used with several snowblowers manufactured by Husqvarna.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

Dryer drum bearing guide supports smooth drum rotation. Replace if drum wobbles, makes noise, or doesn't rotate freely. Confirm fit with your model number.

Bearing cup works with cone to provide stability and support radial/axial loads in your lawn tractor. Replace if worn or damaged. Verify fit with model number.

Hex flange bearing for lawn tractors and riding mowers. Replace if you notice wheel wobble, rough rotation, or grinding noise. Confirm fit with your model.

Flange bearing restricts movement and prevents shifting in lawn tractor components. Replace if you notice wobbling or unusual noise. Verify fit with your model.

The bearing sleeve is an authentic part designed for use with lawn tractors of the riding variety. This bearing sleeve is located on the transmission shaft and used to assist in securing the bearing in its place. The location of this part means that it is susceptible to constant vibrations and other threats. This part can wear down over time and eventually require a replacement, or need to be replaced as a result of damage or a direct impact. Using a genuine product like this replacement bearing sleeve will provide an exact fit for compatible models. This genuine OEM bearing sleeve is manufactured to specific standards by MTD. It is compatible with tractors from MTD, RYOBI, Bolens, Yard Machines, Cub Cadet, HUSKEE, Yard Man, and Troy-Bilt. There are hundreds of tractors that can use this specific bearing sleeve. It is made of durable metal and sold as an individual unit. A wrench will be required for this part replacement, but it is an easy task that should not take a lot of time. Always disengage the engine before starting any repairs and ensure that it is not hot to avoid burns or causing potential damage.

This ball bearing assembly has a wide variety of uses in a number of gasoline-powered yard tools. Bearings are used to provide smooth, friction-free motion between the rotating parts of equipment where pieces fit together and move. The weight and momentum of the rotating motion are distributed to the ball bearings, which prevents wear on the equipment and allows smooth, repetitive motion. Ball bearings are used in equipment such as tillers and lawn tractors, as well as other power equipment that is self-propelled. The bearings will wear out over time since they are on the receiving end of all the angular momentum of the equipment being used. One of the chief locations where bearing assemblies need to be replaced are the drive wheels of the riding mowers and lawn tractors. The bearings are located in brass housings specifically machined to hold them. Since it can be difficult to remove the old ball bearing assemblies from these housings, it is worth considering simply replacing the entire housing as well as the bearing. These bearings are genuine OEM manufactured replacement parts. They are compatible with MTD, Yard-Man, Troy-Bilt, Husky, Cub Cadet, and Yard Machine lawn tools.