Belt

The Belt is an OEM replacement part for LG dryers that is responsible for connecting the motor to the drum to allow it to tumble. Over time, dryer belts can stretch, wear out, or even break, leading to a drum that won't turn and clothes that don't dry properly.

Symptoms of a bad Dryer Belt include:

• The dryer motor running but the drum not turning.
• A squealing or thumping noise coming from the dryer.
• The dryer not starting at all.

Causes of failure can include regular wear and tear from the dryer's operation, overloading the dryer beyond its capacity, which puts extra strain on the belt, or a misalignment that causes uneven wear. A damaged belt can prevent your dryer from functioning correctly, leading to inefficiency in drying clothes and potential motor damage due to unnecessary strain.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Transfers motor power to rotate the drum. Replace when belt breaks, stretches, or causes slipping and noise. Confirm fit with your model number.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

Replacement drum drive belt for washers. Transfers motor power to spin the drum during wash cycles. Replace if drum won't spin or belt shows wear.

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.

This belt-drive is the replacement drive belt that turns the dryer drum so clothes tumble evenly during the cycle. It restores drum rotation when the original belt is worn, stretched, or broken. What it does:

• Wraps around the dryer drum and motor/idler assembly to transfer motor torque to the drum
• Restores normal drum rotation when the belt has failed or slipped
• Helps eliminate symptoms like a non-turning drum, rubbing or squealing noises, or intermittent tumbling
• Compatible with dryers that use a single continuous drum drive belt

• One (1) belt-drive

• Disconnect power (and gas supply for gas models) before servicing
• Access the dryer drum per your model's service instructions—usually from the front or rear—before removing the old belt
• Route the belt around the drum and idler/tensioner exactly as shown in the model's diagram; ensure proper tension and alignment
• If you encounter damaged pulleys, idler, or motor issues, inspect and replace those parts as needed

This component is a deck belt used in lawn mowers and lawn tractors. It is attached to the transmission pulley and is responsible for helping drive the machine. The deck belt helps the mower blades turn while in use. If the belt is cracking, it should be replaced before it breaks. When the deck belt breaks, the lawn mower will not operate correctly.Park the lawn mower on a flat surface, turn off the engine and remove the key. Disconnect the spark plug wire to prevent the equipment from starting on accident. Put the mower deck at its highest position and place wooden blocks. Lower the deck onto the blocks. The belt will need to be removed from the engine pulley and the idler arm. If stabilizer and lift arms are present, disconnect them. Pull the hooks on both sides to release the deck. Remove the belt guard to take off the original belt. Install the new one and reverse the above instructions.This deck belt is designed to fit lawn mowers and lawn tractors created by Poulan and Husqvarna. It is an authentic OEM replacement component that is sold on an individual basis. The part is directly sourced from the manufacturer.

Replacement drum drive belt for your washer. Transfers motor power to rotate the drum during wash cycles. Replace if drum won't spin or belt is frayed.