Filter

Inline water filter reduces chlorine taste and odor in drinking water and ice. Replace every 6 months or 300 gallons to maintain water quality.

Traps airborne grease and cooking particles to protect your ventilation system. Replace every 6 months or when saturated to maintain airflow and reduce odors. Confirm fit with your hood model.

Captures grease, smoke, and cooking emissions from your range hood. Replace when clogged or discolored to maintain ventilation. Verify dimensions for fit.

This is the air filter sub-assembly that slides into the air conditioner unit to capture dust, debris, and airborne particles before air is circulated into the room. It includes the filter housed within a frame for easy removal and reinstallation. Replace this assembly if the filter frame is cracked or warped, or if the filter material is damaged and can no longer be effectively cleaned.

This is a decorative cover that fits over the air filter compartment inside the refrigerator. It conceals the air filter while allowing airflow to pass through for proper air circulation and freshness. Replace this cover if it is cracked, broken, discolored, or if the clips that hold it in place have snapped off.

Replacement air filter for room air conditioners. Traps dust and lint to maintain airflow and cooling efficiency. Replace when clogged or damaged.

Captures lint and fibers during drying to prevent vent clogs. Replace when torn, damaged, or screen detaches from frame. Confirm fit with your model.

This water filter installation kit contains the fittings needed to install or replace a refrigerator water filter assembly, restoring proper connections and helping prevent leaks at the filter interface. What it does

• Provides the connection fittings and hardware used to attach a refrigerator water filter assembly to the appliance water line.
• Re-establishes sealed water flow where old or damaged installation parts caused leaks.
• Can address issues like reduced or intermittent water flow when caused by missing or broken filter fittings.
• Works with the refrigerator's existing water line and filter housing.

• Turn off the refrigerator water supply before beginning; relieve pressure by dispensing water until flow stops.
• Follow the refrigerator manufacturer's installation instructions and use only parts specified for your model.
• Inspect tubing and connections for damage; replace any worn components to ensure a proper seal.

Traps grease, smoke, and odors from cooking. Replace when clogged or discolored to maintain air quality and ventilation efficiency. Verify fit with your model.

Traps food debris and particles in your dishwasher sump. Replace when clogged with hard water deposits or buildup affects cleaning. Verify fit by model.

Traps grease and odors during cooking. Replace when clogged or discolored for effective ventilation. Verify compatibility with your range hood model.

Removes chlorine and impurities for better-tasting coffee. Replace after approximately 400 cups of coffee or 1000 espresso shots. Verify fit with your model.

This factory replacement filter helps protect your appliance by trapping unwanted debris and contaminants so the system can perform as designed. Replace a damaged or clogged filter to restore proper flow and dependable operation. What it does

• Screens particles to protect internal components and maintain airflow or water flow
• Helps sustain performance and reduce wear on the appliance
• Common signs it's time to replace: reduced flow/venting, lingering odors, or visible damage
• Preventive replacement can help maintain efficiency over time

• 1 filter

• Disconnect power to the appliance; shut off water supply if applicable
• Access and remove the old filter, noting orientation and seals
• Install the new filter fully seated; do not overtighten any fasteners or fittings
• Restore power (and water, if used) and check for proper operation and leaks/airflow

This is a set of three charcoal filters designed for recirculating range hoods that do not vent to the outside. The activated charcoal absorbs cooking odors and smoke as air passes through the filter. Replace these filters every six months or sooner if you notice lingering cooking smells, reduced airflow, or the filters appear visibly dirty or saturated.

Grease filter for range hoods and over-the-range microwaves. Dimensions: 3-7/8" x 8" x 3/32" (3.875 x 8 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.

Holds filter cartridge and routes water to dispenser and icemaker. Replace if dispenser flow drops, stuttering occurs, or leaks develop. Confirm fit.