General Electric Hose Or Tube

This flexible drain tube routes defrost and condensation water from the evaporator to the drain pan to help prevent water pooling and ice buildup in the freezer or refrigerator. Durable, shaped tubing makes routing through the cabinet easier. What it does:

• Channels defrost and condensate water away from the evaporator area to the drain pan
• Helps stop water from collecting inside the fridge or forming ice on the evaporator
• Flexible design eases routing through tight cabinet spaces and around components
• Used when the original drain tube is cracked, clogged, hardened, or leaking

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove food and any panels blocking access to the evaporator housing
• Ensure proper seating and routing of the tube; secure with existing clamps or clips and trim excess only if specified by OEM instructions
• After installation, pour a small amount of water into the evaporator drain area to verify proper flow to the drain pan

This fill tube delivers water from the refrigerator supply to the icemaker so trays fill properly for ice production. Made to match OEM fit and restore normal ice maker water fill operation. What it does:

• Directs water from the supply line to the icemaker fill cup so each cycle fills the ice tray.
• Commonly replaced when the tube is cracked, frozen shut, or damaged and ice trays do not fill.
• Helps prevent unwanted water leaks in the freezer compartment when intact and properly installed.
• Works with the icemaker fill system; does not include water valve or tubing.

• One fill tube.

• Disconnect power and shut off the water supply before starting any repair.
• Remove freezer liners/evaporator cover as needed to access and replace the tube; follow manufacturer disassembly steps.
• Handle the tube carefully to avoid kinks or damage; ensure secure connection to the water inlet and icemaker.
• If you see continued filling issues after replacement, check the water valve, inlet line, and icemaker assembly for faults.

This replacement pressure switch hose routes air/suction from the wash tub to the pressure/water-level switch so the machine can detect fill level and run correctly. It restores reliable pressure signal transfer when the original hose is cracked, split, or blocked. What it does:

• Transfers air pressure from the tub to the pressure/water-level switch so the control senses water level
• Helps prevent overfilling or incorrect fill-level detection caused by leaks or clogs in the hose
• Can resolve symptoms like inconsistent fills, washer not completing cycles, or erratic water-level sensing
• Replaces brittle, collapsed, or hardened tubing that no longer seals

• Disconnect power and water before starting any repair; follow all safety guidance for your appliance
• Inspect hose routing and orientation, then slip new hose onto the same fittings with a secure, snug fit
• Replace any damaged clamps or connectors and avoid kinked or pinched hose routing

This fill hose delivers water from the washer inlet valve to the tub, restoring proper water flow and preventing leaks. Replace a cracked, split, or leaking hose to stop water damage and restore normal fill operation. What it does:

• Carries incoming water from the inlet valve to the washer tub during fill cycles
• Stops leaks and water spraying when the original hose is cracked, swollen, or split
• Helps restore normal water fill levels and cycle performance when the hose is failing
• Fits where a direct OEM replacement hose is required for proper seal and routing

• One fill hose

• Turn off water supply and unplug the appliance before starting work
• Inspect inlet valve fittings and hose ends; replace clamps or fittings if worn
• Hand-tighten fittings, then snug with tools—do not overtighten to avoid damage
• Check for leaks after restoring water and power; recheck fittings after a test cycle

This U-shape drain hose hanger secures the dishwasher drain hose to the cabinet or sink rim so the hose stays in the correct position and helps prevent kinks or improper drainage. A simple replacement that restores proper hose routing. What it does

• Holds the drain hose in a U-shaped loop to maintain proper high-loop or air gap positioning
• Keeps the hose away from sharp edges and hot components to reduce wear
• Helps prevent hose kinking that can cause slow draining or backups
• Useful when existing hanger is cracked, broken, or missing

• One U-shape drain hose hanger

• Turn off power to the appliance before accessing the drain hose area
• Typically installs by clipping or snapping around the hose and attaching to cabinet/sink edge—no special tools required
• Inspect the hose for damage and secure hose routing when replacing the hanger

This hose inlet directs hot water into the appliance and replaces a worn or cracked inlet to restore proper water flow and reduce leaks. It's a direct-fit service part used on compatible GE laundry appliances. What it does

• Provides the hot-water connection point for the appliance's fill valve and water supply hose
• Restores a secure, leak-free inlet when original housing is cracked, split, or damaged
• Helps stop intermittent filling or visible leaks at the water hookup
• Matches OEM fit and mounting locations for straightforward replacement

• Turn off water supply and unplug the appliance before starting work
• Drain remaining water from inlet lines to avoid spills
• Inspect hoses, seals, and fittings; replace damaged components and use thread sealant or new gaskets as specified by the OEM