General Electric Hose Or Tube

This fill tube kit routes water from the refrigerator's inlet to the ice maker, restoring reliable water delivery for ice production and reducing drips from a cracked or damaged tube. Simple replacement for worn or broken factory tubing. What it does:

• Replaces the water fill tube that supplies water to the ice maker assembly.
• Restores proper water flow so the ice maker can fill and form ice.
• Stops leaks or drips caused by split, brittle, or disconnected tubing.
• Helps resolve symptoms like no/low ice production or visible water pooling under the freezer/ice maker area.

• Disconnect power and shut off the water supply before starting work.
• Handle grommets and fittings gently to avoid damage; inspect seals and replace if worn.
• Confirm correct routing and secure mounting to prevent kinks or rubbing.

This plastic extension fill tube continues the water path from the valve to the ice maker, restoring proper water delivery for ice production. It helps ensure the ice maker receives measured water without leaks or misdirection. What it does

• Extends the water fill line to reach the ice maker inlet and maintain proper fill height
• Directs metered water into the ice maker mold to form full, solid ice cubes
• Commonly replaces cracked, kinked, or detached tubing that leaks or reduces fill
• Helps stop intermittent or no-fill symptoms when the ice maker and valve are otherwise working

• One plastic extension ice maker fill tube

• Disconnect power and shut off the water supply before starting work
• Remove only panels or components necessary to access the ice maker and fill tube
• Securely seat tubing on the valve and ice maker inlet; check for kinks or contact with sharp edges
• Test for leaks and proper fill by restoring power and water, then observing one fill cycle

This pump hose channels washer tub water to the drain pump, restoring proper drainage and preventing leaks at the pump connection. Durable flexible tubing designed to match factory fit and routing. What it does:

• Transfers wash water from the tub to the drain pump for normal draining
• Replaces cracked, collapsed, pinched, or leaking pump hoses that cause poor drainage
• Helps stop leaks that can occur where the tub outlet connects to the pump
• Restores reliable water flow when the original hose is brittle or damaged

• Disconnect power and water before installing; follow all safety precautions
• Inspect clamps and surrounding fittings; replace clamps if damaged or corroded
• Ensure proper routing and secure clamps to avoid kinks or contact with moving parts
• Test a short cycle after installation to check for leaks

This vent hose directs dryer exhaust from the appliance to the home vent, helping remove moisture and lint so clothes dry efficiently and the dryer runs safely. It replaces a worn or damaged exhaust connection. What it does

• Channels hot, moist air from the dryer to the exterior vent to prevent moisture buildup.
• Helps reduce drying times when unrestricted and properly installed.
• Prevents lint accumulation at the appliance connection when intact.
• Common symptom: longer drying cycles or dryer overheating when the hose is crushed, disconnected, or damaged.
• Common symptom: visible lint buildup around the dryer outlet or exhaust connection.

• One vent hose.

• Disconnect power (and gas, if applicable) before servicing the dryer.
• Inspect clamps and the vent path; replace any damaged clamps or crushed ducting.
• Avoid sharp bends or kinks; maintain a smooth, short run for best airflow.
• Wear gloves to protect hands from sharp edges and lint; follow all manufacturer safety instructions.

This overflow elbow is a small drain fitting that routes excess water away from the appliance to prevent spills and water damage. It restores proper overflow/drain flow so the unit can safely divert unwanted water. What it does:

• Directs overflow or drain water from the appliance plumbing to the drain path
• Replaces cracked, clogged, or leaking elbows that can cause pooling or leaks
• Helps restore normal draining behavior and reduces risk of water where it shouldn't be
• Fits into the appliance's existing drain/overflow tubing and connections

• One overflow elbow

• Inspect surrounding hoses and clips; replace any damaged components for a reliable repair
• Disconnect power and water supply before beginning work to avoid electrical shock or flooding
• Use appropriate clamps or fittings to ensure a secure, leak-free connection

This sump drain hose carries wastewater from the washer tub to the drain pump, preventing leaks and keeping your laundry cycle draining properly. It replaces worn or cracked hoses to restore reliable draining. What it does:

• Routes water from the washer sump to the drain pump so the machine can pump out used wash water
• Stops leaks caused by splits, cracks, or collapsed hose sections
• Helps prevent standing water and incomplete drain cycles
• Works with the washer's pump assembly to maintain proper water flow

• Disconnect power and water before starting any repair
• Remove the cabinet or access panel only as needed for safe access to the sump area
• Ensure hose connections are seated and clamp(s) tightened to prevent leaks; do not overtighten
• Inspect adjoining seals and the pump inlet for damage while replacing the hose

This water inlet pipe routes water from the refrigerator's supply to the dispenser and ice-making system, helping restore proper water flow and stop leaks at the inlet tubing. Durable molded tube designed to match factory fit. What it does:

• Carries water from the household supply to the fridge's dispenser and ice maker
• Replaces cracked, pinched, or corroded inlet tubing that can cause leaks
• Restores water flow when a damaged inlet pipe prevents dispensing or ice production
• Matches OEM shape to align with mounting points and fittings

• Turn off and disconnect power to the appliance before servicing.
• Shut off the water supply and drain remaining water from the line before removing the old pipe.
• Inspect and replace any worn seals, clips, or fittings; tighten connections to OEM torque specifications.