General Electric Motor

This freezer evaporator fan motor assembly drives the fan that moves cold air across the evaporator coils and circulates it through the cabinet. Replacing a weak or failed motor restores airflow for more consistent, reliable cooling performance.

• Circulates air across the evaporator coil to remove heat from the freezer
• Helps distribute cold air to maintain stable temperatures
• Common symptoms: fan not running, intermittent operation, loud squealing/rattling, weak or no airflow from vents, warmer-than-normal temperatures
• Supports proper defrost airflow around the evaporator area

What's included: 1 freezer evaporator fan motor assembly Install notes:

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove freezer contents/shelves and the rear panel to access the motor
• Note wire connector orientation and routing; keep wiring clear of the fan path
• After mounting, ensure the fan spins freely; restore power and verify airflow

This is the left-side freezer evaporator fan motor. It spins the fan to draw air across the evaporator coil and circulate cold air, restoring proper airflow, quieter operation, and stable temperatures when the original motor is weak, seized, or noisy.

• Circulates air across the freezer evaporator coil to move cold air through the compartment
• Supports even cooling and temperature recovery after door openings
• Helps limit frost buildup on the back panel by keeping air moving
• Failure symptoms include weak or no airflow, loud or intermittent fan noise, rising freezer temperature, or soft/melting ice

• Disconnect power before servicing; wear cut-resistant gloves
• Remove freezer drawers/shelves and the rear panel to access the motor
• Note wire orientation; transfer the existing fan blade and any reusable mounting hardware from the old motor
• Ensure the blade spins freely and the shroud is clear before restoring power and checking airflow

This is a blower motor assembly intended for use with range hood fans. The blower motor assembly powers the fan that circulates air over the stove. With use, the blower motor assembly may malfunction or fail. When this part becomes damaged or stops functioning correctly, a replacement part is required to continue the effective use of the fan in the range hood.Signs that the blower motor assembly needs to be replaced include a fan that doesn't turn on or a fan that makes unusual sounds when operating. The replacement of the blower motor assembly is simple. Disconnect the range from its power source before starting the disassembly of the appliance. Wear gloves for protection. A screwdriver and a nut driver are necessary to complete the repair. The blower motor assembly is located inside the range hood. Lower the fan unit, disconnect the old blower motor and connect wires to the new motor for installation.This blower motor assembly is a genuine OEM replacement part. It is sold as an individual piece. The blower motor assembly is made of durable materials. It can be installed in several different models of ranges. The blower motor assembly is compatible with appliances produced by General Electric, RCA, and Hotpoint.

This tangential blower moves cooling air through the appliance to protect internal components and the control area from excess heat. Replace a noisy or non-running fan to restore proper airflow and safe operating temperatures. What it does

• Circulates air across the appliance cavity and control compartment during and after heating cycles
• Helps prevent over-temperature shutdowns and protects electronic controls
• Reduces heat at the control panel and vent area
• Common symptoms: fan won't run, runs intermittently, or makes loud scraping/rumbling noises

• One tangential blower

• Disconnect power and allow the appliance to cool completely before servicing
• Access location varies by model; document wire connections and mounting orientation before removal
• Transfer any brackets, screws, or insulation from the original part if needed
• The fan spins freely and matches the original airflow direction before reassembly

A single-speed convection fan motor that circulates hot air for more even oven cooking and consistent temperatures. Replacing a worn or failed motor restores convection airflow and helps reduce uneven baking. What it does:

• Circulates heated air inside the oven cavity to support convection bake and roast modes
• Restores consistent oven airflow for more even cooking and baking results
• Helps when the convection fan doesn't run, runs intermittently, or makes unusual/grinding noises
• For use where a single-speed convection blower motor is specified by the manufacturer

• Disconnect power to the appliance before servicing to avoid shock hazard
• Allow the appliance to cool completely before accessing the oven cavity
• Verify wiring connections and mounting orientation match the old motor; transfer fan blade or bracket if required

This damper motor assembly controls the refrigerator air damper to help regulate airflow between compartments, restoring proper temperature balance and reducing uneven cooling when the original motor fails. What it does:

• Moves the air damper to open or close airflow between freezer and fresh-food sections
• Allows the fridge control to direct colder or warmer air as needed for temperature regulation
• A faulty unit can cause symptoms like warm or inconsistent fresh-food temperatures, reduced cooling performance, or unusual clicking/noise at the damper area

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Access typically requires removing interior panels or shelving to reach the damper housing
• Align the motor drive and damper linkage; don't force gears or clips when installing
• After installation, restore power and verify damper movement and temperature control operation

This evaporator fan motor assembly circulates cold air through the refrigerator compartment to help maintain even cooling and proper temperature control. Replacing a failed fan restores airflow and helps the appliance cool correctly. What it does:

• Moves air across the evaporator coil so the refrigerator/freezer can cool efficiently
• Commonly replaced when there is little or no airflow from the fresh-food or freezer section
• Can stop excessive frost build-up on the evaporator caused by poor circulation
• May reduce unusual noise if the original motor bearings have failed
• Helps prevent uneven temperatures that can cause food spoilage

• One evaporator fan motor assembly as shown

• Disconnect power to the appliance before starting any repair
• Access may require removing interior panels or the evaporator cover
• Handle the fan blades carefully to avoid bending or cracking; ensure proper blade seating on the motor shaft

This fan motor assembly replaces a worn or failed motor to restore proper airflow in your appliance. Designed to run the fan blade that circulates air for cooling, drying, or venting depending on application. What it does:

• Spins the fan blade to move air through the appliance for proper cooling, ventilation, or heat distribution
• Restores normal airflow when a burned-out or noisy motor causes weak airflow or overheating
• Reduces abnormal noises when a failing motor is the source of grinding, whining, or rattling sounds
• Helps prevent performance issues tied to poor air circulation, such as temperature inconsistencies

• Disconnect power to the appliance before beginning any service.
• Follow OEM disassembly steps; this motor may require removing a cover, fan blade, or mounting bracket.
• Handle the motor and wiring harness carefully; avoid pulling on wires and ensure connectors are fully seated.
• Replace or re-seat rubber grommets or brackets to reduce vibration and noise.

This blower and motor assembly moves air through the appliance to support proper ventilation and heating. Replacing a worn assembly restores airflow and can reduce noise or overheating caused by a failing blower. What it does:

• Spins the blower wheel to circulate air through the appliance's airflow path
• Restores normal ventilation and heat distribution when the blower stops working
• Reduces rattling, grinding, or whistling noises from a worn motor or fan
• Helps prevent overheating or poor performance caused by restricted or non-moving airflow

• One blower and motor assembly as shown

• Disconnect all power before beginning service to avoid shock or injury
• Handle the assembly carefully to avoid bending the blower wheel or damaging wiring
• Basic hand tools typically required; follow appliance service manual for disassembly steps

This condenser fan assembly circulates air across the condenser coils to help remove heat from the refrigerator, improving cooling efficiency and system performance. Replaces a worn or noisy condenser fan to restore proper airflow. What it does:

• Spins the condenser fan blade to move air over the condenser coils, aiding heat rejection
• Commonly fixes symptoms like reduced cooling, warm interior, or a loud/grinding fan noise
• Prevents condenser overheating and helps maintain compressor efficiency
• Operates whenever condenser cooling is required (fan cycles with system demand)

• Disconnect power before servicing to avoid electrical shock
• Handle metal edges and fan blades carefully to prevent cuts
• Verify connector orientation and secure mounting to eliminate vibration or noise

This ventilation motor circulates exhaust and cooling air inside your oven or range, helping maintain proper airflow for safe operation and consistent cooking performance. It replaces a worn or failed blower motor to restore ventilation. What it does:

• Spins the blower to move air through the appliance housing and vent channels
• Helps cool internal components and reduce overheating during use
• Restores proper oven exhaust and ventilation when the original motor is noisy or not running
• Can eliminate humming, grinding, or no-spin symptoms caused by a failed motor

• Disconnect power to the appliance before starting any repair
• Handle the motor and wiring carefully; match connector type and mounting orientation
• Some disassembly of the rear or bottom panel may be required

This circulation motor drives the refrigerator/ freezer evaporator fan to keep cold air moving through the appliance, helping maintain even temperatures and efficient cooling. Replaces a failed or noisy evaporator fan motor. What it does

• Spins the evaporator fan blade to circulate cold air through the freezer and refrigerator compartments.
• Restores proper airflow when a unit is warm or cooling unevenly.
• Stops or reduces excessive noise when a worn or failing motor is replaced.
• Helps prevent frost buildup caused by poor air circulation.

• Disconnect power to the appliance before beginning any repair.
• Handle the fan blade and motor shaft carefully to avoid bending or damaging components.
• Verify mounting orientation and electrical connector fit before final assembly.