General Electric Spring Parts

This replacement spring hook secures a door/spring assembly to restore proper tension and alignment so the door closes and operates as intended. Fits the OEM spring mounting location and installs in minutes with basic hand tools. What it does:

• Latches and anchors a door or tension spring to maintain spring tension and proper door movement
• Helps stop door from sagging, not fully closing, or coming loose when the hook has worn or detached
• Durable stamped metal construction for reliable holding strength under normal use
• Works as the direct replacement piece for the corresponding OEM spring attachment point

• One spring hook replacement part

• Disconnect power (and gas or fuel if applicable) before starting repairs
• Relieve spring tension carefully; springs can be under high load—wear eye protection and gloves
• Use common hand tools (screwdriver, pliers) to remove and attach the hook; retain any clips or fasteners

This spring sleeve is a small replacement part that supports and guides a spring assembly, restoring proper spring alignment and tension so the appliance operates quietly and reliably. It's a simple, low-cost wear item. What it does

• Guides and protects the spring to prevent binding or wear.
• Maintains correct spring alignment and tension for consistent operation.
• Can help reduce noise, rattling, or uneven movement when worn or damaged.
• Used where a spring needs a durable sleeve or spacer to run smoothly.

• Disconnect power and water before beginning any repair.
• Inspect adjacent components (spring, clips, mounts) and replace any damaged parts.
• Use basic hand tools; avoid forcing parts to prevent breakage.
• Test the appliance through a short cycle after reassembly to confirm correct function.

This suspension assembly stabilizes and supports the washer tub, absorbing movement during wash and spin. Replacing a worn suspension can reduce vibration and banging, helping restore smooth, balanced operation and quieter performance. What it does:

• Supports and centers the wash tub within the cabinet
• Dampens vibration, sway, and rocking during spin
• Helps prevent thumping, "walking," and off-balance interruptions
• Common symptoms of failure include excessive shaking, banging noises, frequent off-balance stops, or a tub that leans/sits low

• 1 suspension assembly

• Disconnect power and turn off water supply before servicing
• Wear gloves; components may be under spring tension—support the tub when removing the old assembly
• Access location varies by model; follow your model's service/diagram guidance
• After installation, level the washer and run a test spin to verify balance

This spring wheel is a replacement plastic pulley used in appliance hinge and tension assemblies to restore smooth movement and proper tension. It helps reduce noise and prevents binding from a worn or broken wheel. What it does:

• Guides and retains the hinge/tension spring for smooth opening and closing motion
• Restores proper tension and alignment when an original wheel is cracked or worn
• Helps eliminate scraping, grinding, or binding noises caused by a damaged wheel
• Keeps moving hinge components from slipping or catching during operation

• One spring wheel (LE022C4 / WR02X11233)

• Disconnect power to the appliance before beginning any repair
• Basic hand tools are typically required; follow the OEM service instructions
• Inspect surrounding hinge/spring components and replace any damaged parts

A small replacement push-button spring that restores reliable button return and control feel on affected appliances. Replaces worn or broken button springs so controls snap back and operate more consistently. What it does:

• Provides tension behind a push button so the button returns to its original position after pressing
• Restores proper button feel and prevents buttons from sticking or remaining depressed
• Helps resolve intermittent or unresponsive control-button action caused by a weak or broken spring
• Used in push-button/control-panel assemblies where a compact compression spring is required

• Disconnect power to the appliance before accessing controls to reduce shock risk
• Remove the control panel or button assembly per your model's service instructions; keep small parts secure
• Note spring orientation and seating; use needle-nose pliers if needed to position the spring carefully

This short vertical spring provides the tension needed for the appliance's vertical hinge or mounting assembly, restoring proper movement and alignment for smooth operation and secure closure. What it does:

• Supplies vertical tension to a hinge or mounting assembly to maintain proper positioning
• Helps restore even, controlled movement of doors, panels or drawers
• Reduces sagging, slipping or uneven closing caused by a worn spring
• Minimizes rattling or misalignment during normal use

• Disconnect power to the appliance before beginning any repair.
• Springs can be under tension — wear safety glasses and use appropriate tools.
• Inspect mating hardware (clips, pins, brackets) for wear and replace if needed.

This rear rod assembly supports and stabilizes the dryer drum so it spins smoothly and stays aligned. Replacing a worn or bent rear rod restores proper drum tracking and reduces rubbing, noise, and vibration. What it does

• Provides a mounting/axle point at the back of the drum to keep rotation centered
• Helps prevent drum wobble, scraping noises, and uneven wear on drum seals or glides
• Commonly replaced when the drum is hard to turn, noisy, or visibly misaligned
• Works with existing rollers, bearings, and retaining hardware to maintain drum stability

• One rear rod assembly as shown

• Disconnect power (and gas if applicable) before beginning any repairs
• Access typically requires removing the dryer cabinet or back panel and the drum — follow the OEM service manual
• Inspect related rollers, bearings, and seals and replace if worn to avoid repeat failure

This is a replacement top burner spring that secures the burner head and helps maintain stable alignment for reliable ignition and even flame. Restores proper seating for many gas cooktop burner assemblies. What it does

• Holds the burner head/assembly in place so the cap and burner stay aligned
• Helps ensure consistent spark/ignition by keeping electrode and burner properly positioned
• Prevents burner wobble or uneven seating that can cause poor heating or flame irregularities
• Small metal coil designed for use with compatible gas cooktop top burner assemblies

• One top burner spring

• Disconnect power and shut off the gas supply before attempting any service; allow the appliance to cool completely.
• Remove burner grates and caps, then replace spring in the burner base per your model's service instructions.
• Use basic hand tools; keep parts organized and avoid damaging electrodes or gas fittings.

This is the left side broiler door spring. For right side use WB9K2.