Heating Element

Best Seller

Genuine Whirlpool part

Lower Bake Element

By: Whirlpool

Part Number: WP7406P428-60

The Lower Bake Element is an OEM part for Whirlpool ovens. It is positioned at the bottom of the oven and is primarily responsible for producing the heat required for baking. By converting electrical energy into heat, this element ensures consistent and even cooking temperatures, crucial for achieving perfect baking results.

Symptoms of a bad Lower Bake Element include:

Lack of heat in the oven, leading to undercooked food,
Uneven baking with some parts of the food less cooked than others,
Visible damage or breakage in the element itself,
No glow from the element when the oven is turned on.

Causes of bake element failure typically involve burnout from continual use, electrical issues such as faulty wiring or connections, or physical damage.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Won't start

Do-It-Yourself Stories from Customers like You Lower oven would not heat up on maytag gemini electric range Jason B. • Boylston , MA • October 19, 2014

Replaced lower and upper element. Internet research suggested it was the control board. Thankfully it was a much quicker and cheaper fix. Read more

$36.95

Compare At:: $43.60
You Save:: $6.65

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (177)

By: Ge

Part Number: WB44X173

The Broil Element is an OEM part for GE ovens. It is designed to provide the high heat necessary for broiling food, such as meats and vegetables, allowing for a quick cooking process that seals in flavors and creates a deliciously crispy exterior.

Causes of a bad Broil Element can include failure due to internal coil damage, burnout from excessive use, or electrical issues such as short circuits or loose connections that prevent it from heating.

Symptoms of a bad Broil Element include:

The oven not heating up to the set broil temperature.
Uneven cooking or browning of food.
No visible glow from the element during operation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Oven not heating evenly
Won't start
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015

I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns. The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more... Read more

$28.23

Compare At:: $61.01
You Save:: $32.78

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Oven Bake Element

4.9 (416)

By: Frigidaire

Part Number: 5303051519

The bake element is an OEM replacement part for Frigidaire ovens. This element is located at the bottom of the oven cavity and is responsible for providing the heat needed for baking. When the oven is turned on, electrical current flows through the bake element, causing it to heat up and glow red. This process radiates heat evenly throughout the oven, ensuring that food is cooked thoroughly and uniformly.

Causes of a bad Oven Bake Element include visible damage such as blistering or holes, which can occur after years of use or from food spillages that corrode the metal. Additionally, a malfunctioning element may not glow red or may only partially heat, indicating that it's unable to conduct electricity effectively.

Symptoms of a bad Oven Bake Element include:

The oven not heating up properly or at all
Uneven cooking or baking results
The element not glowing when the oven is turned on

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms

Oven not heating evenly
Oven is too hot
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Lower element not getting hot enough on electric range Richard H. • North Lewisburg , OH • February 14, 2020

Ordered spare part that actually fit my oven. Arrived in three days from next state over. Unplugged power cord, removed racks, used 1/4" socket on ratchet with 6 inch extension to remove two sheet metal screws at lower back of oven. Pulled old element out 2 inches then tilted front of element up 45 degrees for spade connectors to clear holes at back of oven. Once clear, pulled element forward until the white #16 wires pulled through the openings in the oven (inside at the back). By hand, gently... Read more

$34.95

Compare At:: $41.59
You Save:: $6.64

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Coil Surface Element

5.0 (227)

By: Frigidaire

Part Number: 316442301

The Coil Surface Element is an OEM part for Frigidaire ranges and cooktops. It is a key component for cooking, providing the heat source directly under pots and pans. This 8 inch element is designed to heat quickly and maintain consistent temperature, which is essential for effective cooking and energy efficiency.

Symptoms of a bad Coil Surface Element include:

The element not heating up when turned on
Uneven heating or hot spots that can cause inconsistent cooking results
The element not turning off or fluctuating in temperature

Causes of a bad coil surface element can include a breakdown of the coil itself due to general wear and tear, electrical connections becoming loose or corroded, or damage from spills or impacts during cooking.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You My frigidaire surface element was burnt out Dong N. • Monterey , CA • November 09, 2014

I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM! Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service. The part fits... Read more

$39.18

Compare At:: $43.10
You Save:: $3.92

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Frigidaire part

Dryer Heater Element

4.9 (102)

By: Frigidaire

Part Number: 134792700

The Dryer Heater Element is an OEM replacement part for Frigidaire dryers. It is a crucial component responsible for generating heat within the dryer drum, enabling the drying process to occur efficiently and effectively.

Symptoms of a bad dryer heater element include:

Extended drying times or failure to fully dry clothes
No heat or insufficient heat production during the drying cycle
Burning odors or visible signs of overheating

Causes of a dryer heater element failure can include general wear and tear over time, electrical issues, or damage from lint buildup or other obstructions preventing proper airflow.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You E64 error Jay M. • Covington , LA • June 12, 2014

I just googled the error code saw how to do the repair and bought the part. It all went much smoother than I thought. Would do again Read more

$97.72

Compare At:: $153.21
You Save:: $55.49

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Heating Element

4.8 (17)

By: Whirlpool

Part Number: W10703867

The Heating Element is an OEM part for Whirlpool dishwashers. This element is for heating the water to the required temperature and for the drying cycle, allowing your dishes come out clean and dry. It's positioned at the bottom of the dishwasher tub, where it heats the water and aids in the drying process by evaporating moisture from the dishes.

Causes of a bad heating element include mineral buildup from hard water, which can insulate the element and reduce its efficiency, or electrical issues such as a burnt-out coil.

Symptoms of a bad heating element:

Dishes not being cleaned properly due to the water not reaching the optimal temperature.
The dishwasher not drying dishes effectively
The dishwasher taking longer to complete cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Heater element not working on dishwasher Bryan Y. • Hudson , IL • January 07, 2018

Followed the Appliance Parts Pros video and it took me about an hour from start to finish. I felt like the job was easy to accomplish. Read more

$77.70

Compare At:: $91.69
You Save:: $13.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Heating Element

4.9 (184)

By: Frigidaire

Part Number: 318255006

The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.

Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.

Symptoms of a bad Heating Element include:

The oven does not heat up
Uneven cooking or baking
Longer cooking times than usual
The element not glowing when the oven is turned on

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Won't start

Do-It-Yourself Stories from Customers like You My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015

One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it... Read more

$146.95

Compare At:: $176.34
You Save:: $29.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Heating Element

4.9 (134)

By: Whirlpool

Part Number: WPW10207397

The Oven Heating Element is an OEM replacement part for Whirlpool ovens. It is a crucial component responsible for generating the heat necessary for baking, roasting, and broiling in the oven cavity.

Causes of a bad oven heating element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.

Symptoms of a bad oven heating element:

Oven not heating up properly or failing to reach the set temperature
Uneven heating or hot spots within the oven cavity
Visible damage or breaks in the heating element coil
Unusual smells or burning odors emanating from the oven

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Burnt out oven coil Donald T. • Bluffton , SC • April 27, 2014

Received new part less than 24Hrs from order placement, installed and operating normally 15 min later. GREAT SERVICE!! Read more

$59.95

Compare At:: $70.74
You Save:: $10.79

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (319)

By: Ge

Part Number: WB44K5012

The Oven Bake Element is an OEM part for GE ovens. This element is located at the bottom of the oven and is primarily responsible for providing the heat necessary for baking. When the oven is turned on, electricity flows through the element, causing it to heat up and glow red-hot. This bake element has ¼” push-on wire terminals. If you are unable to use your old wire connectors, order TJMA02875-1.

Symptoms of a failing oven bake element include:

Oven not heating up properly or taking longer to heat
Uneven cooking or baking
Element not glowing or only partially glowing during operation
Visible signs of blistering, cracks, or holes on the element

Causes of oven bake element failure typically include general wear and tear from regular use, exposure to high temperatures which can weaken the element over time, or electrical issues such as short circuits.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Oven is too hot
Won't start

Do-It-Yourself Stories from Customers like You Element burn into Richard D. • Summerville , GA • April 02, 2014

Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro Read more

$61.64

Compare At:: $73.97
You Save:: $12.33

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Bake Element

4.9 (248)

By: Whirlpool

Part Number: WP74010750

The Oven Bake Element is an OEM part for Whirlpool ovens. This crucial component is responsible for providing the heat necessary for baking. Located at the bottom of the oven, the bake element heats up when electricity passes through it, allowing your oven to reach the desired cooking temperature. This OEM Replacement Part has push-on terminal ends and measures approximately 23-5/8"wide x 15-3/8" long, with 3-3/8" inserts

Symptoms of a failing oven bake element include:

Lack of heat production when the oven is turned on
Uneven baking results
Visible damage to the element such as blistering or splits
A trip in the circuit breaker when the oven is activated

Causes of bake element failure typically include thermal stress causing material fatigue, accidental damage during cleaning, and electrical issues such as short circuits.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

If you are unable to use your old connectors order TJMA02875-1.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Element will not heat
Oven is too hot

Do-It-Yourself Stories from Customers like You The baking element was on fire Charles M. • Bandera , TX • March 30, 2014

I finally found the right serial number and found the part at Appliance Parts Pros. I was skeptical that they would send the element that had the correct rear brace fixture. when it came 2 days later i opened the box the Part was correct and it took about 15 minutes to replace since there are only two screws. My oven works fine now. THX Read more

$39.95

Compare At:: $47.14
You Save:: $7.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Haliant Element

4.9 (53)

By: Ge

Part Number: WB30T10130

The Element Haliant 12 Inch is an OEM part for GE ranges. This radiant heating element is designed to provide even and consistent heat for cooking on your stovetop. It ensures efficient transfer of heat to your cookware, allowing for precise temperature control.

Over time, heating elements can wear out or become damaged due to repeated use, exposure to high temperatures, or accidental impact. If the element becomes faulty, it can result in uneven heating or failure to heat up entirely.

Symptoms of a bad element include:

Element not heating up
Inconsistent or uneven heating
Visible damage or burn marks on the element
Sparking or unusual noises during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Center coil of the large dual burner went out Amy G. • Fordland , MO • July 01, 2014

Two screws in the front, lifted top, removed old burner, replaced with new one. The trickiest part was getting the wires connections loose from the old burner. Read more

$146.95

Compare At:: $174.87
You Save:: $27.92

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

9" Dual Radiant Surface Element

4.7 (29)

By: Ge

Part Number: WB30X24111

The Element Radiant 9" Dual is an OEM part for GE ranges and cooktops. This dual-element radiant burner provides versatile cooking options, offering both a small and large heating area within a single burner. It ensures efficient and even heat distribution for a variety of cooking needs, accommodating different pot and pan sizes.

Causes of a bad radiant element can include normal wear and tear, electrical issues, or damage from heavy cookware or impact. Over time, these factors can lead to the element failing to heat properly or not functioning at all.

Symptoms of a bad radiant element include:

The burner not heating up or heating inconsistently
Only one of the dual elements functioning
Visible damage or discoloration on the element
The burner cycling on and off more frequently than usual

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Burner not working. Peter J. • Dunedin , FL • August 09, 2019

Ordered part, reviewed several videos demonstrating replacement of burner. Read more

$101.79

Compare At:: $122.15
You Save:: $20.36

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Whirlpool part

Oven Bake Element

4.9 (240)

By: Whirlpool

Part Number: 326791

The Oven Bake Element is an OEM part for Whirlpool ovens. This crucial component is located at the bottom of the oven cavity and is responsible for providing the heat needed for baking. The bake element converts electrical energy into heat, which is then distributed throughout the oven to cook food evenly.

Common causes of a bad bake element include excessive use, accidental damage during cleaning, or a power surge that can burn out the element.

Symptoms of a bad Oven Bake Element include:

The oven not heating up to the set temperature.
Visible damage to the element, such as blistering, cracks, or breaks.
Lack of heat when the oven is turned on
An increase in cooking times

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Bottom coil of oven was not heating Charles W. • Suffolk , VA • February 04, 2017

I googled the model number of the oven and came across AppliancePartsPros.com The coil along with replacing video was right at hand. I ordered the part, got it three days later (standard shipping) and installed it. To sum it up, it was a five minute job. Read more

$57.95

Compare At:: $68.96
You Save:: $11.01

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (147)

By: Ge

Part Number: WB44K5013

The Oven Bake Element is an OEM part for GE ovens. This component is located at the bottom of the oven cavity and is responsible for generating the heat needed for baking. By converting electrical energy into heat, the bake element ensures even temperature distribution throughout the oven, allowing for consistent cooking results.

Causes of a malfunctioning Oven Bake Element may involve visible signs of wear or damage, like blistering or holes, a break in the element that hinders proper heating, and burnout or malfunctioning resulting from age or excessive use.

Symptoms of a failing Oven Bake Element include:

The oven not heating to the set temperature
Uneven baking results
No visible glow from the element when the oven is turned on
The oven taking longer than usual to preheat

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014

Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more

$63.95

Compare At:: $76.10
You Save:: $12.15

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

8 Inch Large Surface Element

5.0 (185)

By: Whirlpool

Part Number: WP660533

The 8-inch large Surface Element is an OEM replacement part for Whirlpool induction ranges. It serves as an integral independent heating zone to boil, sauté or simmer large pots quickly.

Symptoms of a bad surface element include:

Inability to power on or heat evenly across the surface
Slow inconsistent heating or hot/cold zones developing
Parts of the coil visibly cracked or disconnected
Tripped circuit breakers upon heat-up that don't reset

Causes stem from normal thermal stress fatigue of coiled elements exceeding thousands of temperature cycles daily. Continuous high wattage energy may cause microscopic metal deterioration developing over a decade plus of use.

This genuine Whirlpool replacement part is compatible with Kenmore, Roper and Jenn-Air ranges.

For matching 6-inch element order WP660532.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You The burners on my drop in stove would not work the connections and the surface elements were in bad shape Luise C. • Worth , MO • November 23, 2014

I lucked out my nephew was here to deer hunt and he helped me. I do believe I could have done it on my own but was more confident with his help. I will say the videos did help. Read more

$35.54

Compare At:: $53.59
You Save:: $18.05

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Heating Element

4.8 (217)

By: Whirlpool

Part Number: WP4391960

The Dryer Heating Element is an OEM part for Whirlpool dryers. This component is responsible for generating the heat needed to dry clothes efficiently. Situated in the rear or bottom of the dryer, the heating element heats the air before it enters the dryer drum, providing the warmth necessary for drying garments.

Common causes include overheating due to restricted airflow from a clogged vent, a break in the heating coil from wear and tear, or electrical issues such as short circuits. It's crucial to maintain proper dryer venting to prevent overheating and to ensure the longevity of the heating element.

Symptoms of a bad Dryer Heating Element include:

Clothes taking longer than usual to dry
Dryer not heating up at all
Increased energy bills due to the dryer running longer
A noticeable difference in drying efficiency

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

No longer includes terminals and adapter leads. You can purchase the wire separate, part number 279457. Another common Whirlpool dryer element is 279838. Use our model number search to be sure you're getting the correct element for your dryer.

This part fixes the following symptoms

No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You Old Whirlpool dryer model LE8650XWW0 would not heat purchase in 1993. Byron V. • Huntsville , AL • December 08, 2017

Since the dryer was 24 years old I opted to replace all the possible problem components, instead of just the bad one. The parts aren't that expensive and do to their age I figured it was worth it to avoid having to go back into the dryer in a few months. The repair was surprisingly easy and went pretty much as the video instruction AppliancePartPros provided with one exception. Because, my model was much older than that used in the video, I had a more difficult time replacing the Heating... Read more

$31.95

Compare At:: $49.85
You Save:: $17.90

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Heating Element

Lower Bake Element

Oven Broil Element

Oven Bake Element

Coil Surface Element

Dryer Heater Element

Heating Element

Heating Element

Oven Heating Element

Oven Bake Element

Oven Bake Element

Haliant Element

9" Dual Radiant Surface Element

Oven Bake Element

Oven Bake Element

8 Inch Large Surface Element

Dryer Heating Element

Appliance Type

Brands