General Electric Filter

Color: metallic. Measures about 5 inches wide by 7-1/2 inches deep.

The Grease Filter is an OEM Replacement Part designed to maintain the cleanliness and efficiency of your GE microwave. This filter measures 7 3/4 inches x 9 1/8 inches and is specifically designed to collect grease particles from the air while cooking. B

Causes of a bad grease filter can include regular wear and tear from frequent use, buildup of grease and cooking residues, or physical damage from cleaning or handling. Over time, the filter can become less effective at trapping grease, leading to reduced performance.

Symptoms of a bad grease filter include:

• Noticeable grease buildup on the range hood or microwave surfaces
• Reduced airflow or ventilation efficiency
• Visible damage, tears, or holes in the filter
• Unpleasant odors due to trapped grease and food particles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Filter Housing and Tube Assembly is an OEM part for GE refrigerators. This assembly is responsible for securely holding the water filter in place while directing water through the filter and into the dispenser or ice maker. Approximate dimensions: 18" x 14.7" x 3.3"

Over time, the water filter housing and tube assembly can become damaged due to regular use, exposure to high water pressure, or mineral deposits building up inside the tubes. Such damage may lead to leaks or reduced water flow, affecting the performance of the refrigerator's water and ice systems.

Symptoms of a faulty water filter housing and tube assembly include:

• Water leaks around the filter area
• Low water flow to the dispenser or ice maker
• Difficulty installing or removing the water filter

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This activated charcoal filter restores odor reduction for recirculating range hoods. Replacing a saturated filter helps your hood control cooking smells and maintain effective performance in non-ducted installations.

• Adsorbs cooking odors when the hood is set to recirculate (non-ducted)
• Helps maintain capture performance; replace when odor removal declines
• Common signs it's due: lingering odors, heavy discoloration, or musty smell when the fan runs
• Not washable; designed for periodic replacement only

• Disconnect power to the hood before servicing
• Remove the grease filter to access the charcoal filter location/retainer
• Seat the new filter fully and secure per your hood's design; follow any airflow markings if present
• Reinstall the grease filter, restore power, and test the fan

Water filter head and tubing assembly holds the water filter and connects the water lines to the water filter. Approximate dimensions: 13.6" x 12.7" x 4.6"

Color: metallic. It measures about 10 inches in diameter.

This charcoal filter removes cooking odors in appliances configured to recirculate air instead of venting outdoors. Replacing a saturated or damaged filter helps restore odor absorption and maintain effective airflow. What it does:

• Adsorbs cooking odors and some smoke in non-vented installations
• Helps maintain airflow and fan performance when replaced as the filter becomes saturated
• Common symptoms of a spent filter: lingering odors, reduced airflow, darkened or crumbling media
• Designed for recirculating setups; typically not used on externally vented installations

• Charcoal filter

• Disconnect power before service and allow the appliance to cool
• Open the front grille or bottom access panel and release any tabs or screws holding the old filter
• Install the new filter in the same orientation and secure it
• Wear gloves; nearby metal edges can be sharp

This charcoal filter captures odors and fine particles from the air as it recirculates through the microwave, helping keep your kitchen fresher and reducing buildup inside the unit.

• Adsorbs cooking odors when the microwave is set up for recirculating operation
• Helps maintain airflow by trapping grease and fine particulates
• Replace when saturated or damaged; common signs include lingering odors, reduced capture of smoke/steam, or a visibly dirty filter
• Regular replacement supports effective ventilation and protects internal components

• Disconnect power before servicing
• Access panel/grease filter removal may be required to reach the charcoal filter
• Note airflow orientation and seat the new filter securely
• Do not wash; replace at recommended intervals for best performance

This in-line water filtration system reduces water contaminants and improves taste of drinking water and ice. Reduces the taste and odor of chlorine through high quality carbon block media without removing minerals beneficial to your health. The filter should be replaced every six months or 300 galleons for best performance. The Quick Connect feature makes filter replacement fast and easy. Flow rate: 0.5 gpm/1.9 lpm. 1/4" quick connect fittings on both ends.

Color: metallic. Measures about 6 inches wide by 9-1/2 inches deep.

This whole house carbon filter is used in water pumps to reduce the number of contaminants found in water. This filter removes odors, rust, sediment, and sand that is often found in well water and some city-provided water. These impurities can affect the taste of drinking water and, in turn, affect the taste of coffee, tea, and foods cooked using water. It may also have an odor if the area has a high concentration of sulfur or iron. The manufacturer suggests replacing the filter every 30,000 gallons or every three months. This carbon filter is used on an in-line water filter that supplies water for the whole house. It is often used in combination with water softeners. If the water begins to taste or smell before the filter's three-month recommended life, a new filter should be installed. If the water quality is bad, the filter may need to be changed more often than recommended. This is normally indicated by smell and taste in foods and beverages made with water. This whole house carbon filter is sold individually. It is an authentic OEM replacement part sourced directly from the manufacturer. It is designed for use in water filters manufactured by General Electric.

This microfilter sits in the dishwasher sump to capture fine food particles so water recirculates cleanly. Replacing a torn or clogged filter can help restore wash performance and protect the pump and spray arms from debris.

• Screens out fine debris to keep recirculating wash water cleaner
• Helps prevent redepositing and spray-arm clogs
• Common signs include gritty residue on dishes, poor cleaning results, visible tears/warping, or a filter that won't lock securely

• Disconnect power at the breaker before servicing.
• Open the door and remove the lower rack.
• Twist to unlock and lift out the old filter; clear any debris from the sump (locking direction varies by model).
• Seat the new filter fully and rotate to lock; ensure it's flush and secure.

This is a genuine OEM replacement grease filter for use on cooktops. The air filter is used during cooking to filter smoke, grease, and other air contaminants from the air. When food is overheated, and smoke fills the kitchen, the air filter will pull the smoke from the air through the filter and out the exhaust. This helps to keep the air in the house odor and smoke-free. Odors can alter the way food tastes, so keeping the air and grease filter changed can help when serving food and how it is received. This filter also catches grease particles when cooking food in oil. These spatters will eventually clog the filter and necessitate the need to remove and replace it. If the filter is not removed, the air will not be able to circulate through it, and the filter will not work efficiently. Removal does not require tools. The filter is simply pulled out of the cavity and a new one placed in the cavity. The old filter should be discarded; this is not a filter that can be washed and reused. This filter is a black metal part that is sold individually. It is designed for stovetops and ranges manufactured by General Electric.

This charcoal filter set restores odor removal for ductless range hoods. In recirculating mode, the carbon media adsorbs cooking smells and smoke so your kitchen air stays fresher and the hood performs as intended.

• Traps odors and smoke during recirculating operation
• Helps maintain airflow and ventilation performance
• Replace when saturated or damaged to keep odor removal effective
• Common signs it's time: lingering cooking odors, reduced smoke capture, heavily discolored filter media

• Disconnect power and allow the hood and lamps to cool before service
• Remove grease filters to access the charcoal filters; release clips/tabs, swap in the new set
• Seat filters securely; align any arrows or tabs as marked
• Charcoal filters are not washable—replace when saturated

Cylindrical filter that helps trap sediment and debris to protect your appliance's internal components and maintain water flow. Replacing a worn filter restores filtration and helps prevent clogging-related performance issues. What it does:

• Captures sediment and particulates to reduce debris reaching valves, pumps, and dispensers.
• Helps maintain consistent water flow by preventing buildup in flow paths.
• Reduces risk of clogs that can cause noisy operation or degraded performance.
• Common symptom: reduced water flow or visible particles in water/dispensed liquids.

• Turn off power to the appliance and shut off the water supply before starting.
• Relieve pressure and drain water from the lines where applicable to avoid spills.
• Inspect and replace any worn O-rings or seals; ensure the filter seats properly.
• After installation, restore power/water and run a short cycle or check for leaks.

Filter sub-assembly replaces the refrigerator's water-filter housing, holding the cartridge and directing water to the dispenser and ice maker. Restores secure cartridge seating and consistent water flow when the housing is damaged. What it does:

• Holds and seals the cartridge to help prevent leaks at the filter location.
• Directs filtered water to the dispenser and icemaker plumbing.
• Commonly replaced for leaks at the filter area, reduced water flow, or a loose/ill-fitting cartridge.
• Intended for cartridge-style refrigerator water-filter systems.

• Turn off the refrigerator water supply and relieve dispenser pressure before removing the old filter housing.
• Use basic hand tools; inspect and replace any worn O-rings or seals to ensure a proper seal.
• After installation, restore the water supply, check carefully for leaks, and run/flush water per refrigerator guidance.