General Electric Filter

This is the air filter assembly for select GE room air conditioners. It traps dust and lint before they reach the evaporator coil, helping maintain airflow and cooling performance.

• Captures airborne dust and lint to protect the coil and blower
• Helps maintain steady airflow and cooling efficiency
• Replace if cracked, warped, missing, or won't stay seated
• Common symptoms include reduced airflow and visible debris on the filter

• Unplug the unit before servicing
• Remove the front grille or filter access panel; slide the old filter out
• Install the new filter with airflow orientation matching the original
• Clean surrounding surfaces and reinstall grille before powering on

This grease filter traps airborne grease and cooking particles before they reach the blower and ductwork. Replacing a saturated or damaged filter helps restore vent performance, reduce lingering odors and smoke, and protect the ventilation system from buildup.

• Captures grease and particulates from cooktop exhaust to keep the vent path cleaner
• Helps maintain proper airflow and smoke/steam capture
• Common replacement signs: weak suction, visible saturation, tears/warping, or sagging

• Disconnect power and allow the appliance and filter area to cool before starting
• Open the filter panel/grille; support the filter while releasing tabs or latches
• Note orientation and seating; install the new filter securely without bending it
• Do not operate the vent without a grease filter; test fan operation after installation

Note: This filter is approximately 12" x 17". (Qty of one)

This Grease Filter is an OEM part for GE range hoods. As a key filtration component, this rectangular filter works to capture cooking emissions like grease, smoke and odors above the cooktop. It prevents these contaminants from recirculating back into the kitchen or home.

Causes of a bad filter can include excessive use over time, washing with improper cleaning solutions, or damage during removal/installation.

Symptoms of a bad filter include:

• Reduced airflow and suction from the range hood
• Grease or smoke escaping from the hood despite ventilation usage
• Unpleasant cooking smells lingering in the kitchen

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This air filter assembly traps dust and lint before they reach the evaporator coil, helping your room air conditioner maintain airflow and cooling performance. Replace clogged or damaged filters to protect components and keep cooling consistent. What it does:

• Screens intake air to help prevent debris from coating the evaporator coil and blower
• Helps sustain proper airflow and cooling performance
• A torn, missing, or heavily clogged filter can cause reduced air volume, longer run times, or uneven cooling
• Captures dust and lint that would otherwise accumulate inside the unit

• Includes: 1 air filter assembly

• Unplug the unit before servicing
• Open the front grille to access the filter; note the orientation of the old assembly
• Slide out the old filter and fully seat the new assembly in the same position
• Do not operate the unit without a filter installed

Keep your room air conditioner breathing easy with this replacement air filter. It captures dust and lint to help maintain airflow and cooling performance, while protecting the indoor coil from debris buildup.

• Screens return air to trap dust, lint, and debris before it reaches the evaporator coil
• Helps maintain proper airflow and consistent cooling
• Replace when torn, warped, missing, or heavily soiled
• Common symptoms of a bad/missing filter: weak airflow, poor cooling, longer run times, or frost on the coil

• Disconnect power before servicing
• Access the filter from the front grille or filter slot; slide out the old filter
• Clean the filter track/grille area; install the new filter fully seated and flat
• Operate the unit only with a filter installed to protect internal components

This water filter manifold assembly holds the MSWF cartridge and routes water through the refrigerator's filtration system to the dispenser and icemaker. Replacing a damaged filter head restores a secure seal and consistent water flow.

• Provides the twist-lock mount and seal for the MSWF filter cartridge
• Connects inlet and outlet lines to direct filtered water to the dispenser and icemaker
• Common failure symptoms: leaks around the filter head, low or no dispenser flow, icemaker not filling, or the filter not seating/locking properly
• Designed specifically for refrigerators that use the MSWF filter style

• Disconnect power and shut off the water supply before servicing
• Dispense water to relieve line pressure; place a towel to catch residual water
• Remove the MSWF filter; transfer mounting hardware and line connections to the new assembly one at a time to maintain orientation
• Restore water and power; check all connections for leaks and run water to purge air from the system

This air filter traps dust and lint before they reach the evaporator in your room air conditioner, helping maintain airflow and cooling performance. Replacing a damaged or missing filter protects the coil and keeps the unit running efficiently. What it does:

• Screens incoming air to help keep the evaporator coil clean
• Helps maintain proper airflow and cooling performance
• Replace if torn, warped, or excessively soiled
• Common symptoms: weak airflow, reduced cooling, or a filter that won't stay seated

• 1 air filter

• Disconnect power before opening the front panel
• Open the grille/access panel, remove the old filter, and note its orientation
• Slide the new filter fully into the track; ensure it sits flat and secure
• Do not operate the air conditioner without a filter; follow the owner's manual for care

This replacement air filter for room air conditioners traps dust and lint before they reach the coils and blower, helping maintain airflow and cooling performance when the original filter becomes clogged, damaged, or missing.

• Captures dust and lint from return air to protect internal components
• Helps maintain proper airflow for consistent cooling
• Reduces debris recirculation into the room
• Replace if torn, warped, or permanently clogged; symptoms can include weak airflow, longer run times, and poor cooling

• Disconnect power before servicing the unit
• Open or remove the front grille per your model's design
• Slide out the old filter; insert the new filter in the same orientation until fully seated
• Restore power and check airflow

This grease filter screens cooking vapors drawn through the vent system to capture grease and protect the blower and ductwork, helping maintain clear airflow. Replace a saturated or damaged filter to keep ventilation performance consistent. What it does:

• Traps airborne grease and particulates before they reach the fan and ducting
• Helps maintain proper airflow and vent performance
• Replace if the filter is heavily coated, torn, dented, or deformed
• Smoke or steam lingering more than usual can indicate a clogged filter

• One grease filter

• Disconnect power to the appliance and allow surfaces to cool before service
• Support the filter while releasing the retaining tabs or clip to remove it
• Install the new filter in the same orientation; ensure tabs/clips are fully engaged
• Do not operate the fan without a grease filter installed

This filter uses a dense engineered carbon filter media rated NSF 42 and 53 for the reduction of waterborne contaminants such as asbestos, atrazine, chlorine, cysts, lead, mercury, toxaphene, turbidity, and sediment. It has a filter life of 6 months or 300 gallons and features an easy twist-and-lock style technology that fits easily underneath your sink. Dimensions: 2 inches x 8 1/2 inches. Flow Rate: 1 GPM.

This optional charcoal replacement filter helps reduce lingering food odors and improves interior air freshness in compatible refrigerators. Easy to swap in refrigerators that use an activated carbon air filtration cartridge. What it does:

• Adsorbs and helps reduce common refrigerator odors for a fresher-smelling interior
• Restores air freshness when stale or musty smells develop
• Works with refrigerators equipped with an activated carbon air filter system
• Serves as a direct replacement cartridge when the original filter is worn or saturated

• Remove packaging and slide or snap the new cartridge into the filter housing; secure per the manufacturer's instructions.
• Do not wash or soak the charcoal cartridge—replace when performance declines.
• Dispose of the used filter cartridge according to local regulations.

This manifold assembly routes and distributes incoming wash water to the dishwasher's spray arms and wash zones, restoring proper water flow for effective cleaning. Designed to replace a worn, cracked, or leaking manifold and return consistent wash performance. What it does:

• Directs incoming water to the spray arms and wash chamber for normal wash cycles
• Replaces cracked or damaged manifold that can cause leaks or weak spray performance
• Helps restore proper water flow when one or more spray arms receive little or no water
• Works with the dishwasher's valves and hoses to maintain sealed water pathways

• One manifold assembly

• Turn off power and water to the appliance before beginning repair
• Inspect and replace any worn O-rings, gaskets or hoses when installing the manifold
• Tighten fittings to manufacturer torque recommendations and test for leaks after reconnecting water

This fine mesh dishwasher filter captures food particles to help protect the pump and improve wash performance. It replaces a worn or clogged filter so water can drain and spray properly for cleaner dishes. What it does:

• Traps food debris and large particles from the wash sump to prevent pump and spray-arm clogs
• Helps maintain proper water circulation and drainage for better cleaning
• Reduces recirculation of soil during the wash cycle
• Commonly replaced when the filter is torn, heavily clogged, or causing drainage/noise issues

• One fine mesh dishwasher tub filter

• Turn off power to the appliance before inspecting or replacing the filter
• Remove lower rack to access the filter; follow OEM diagram for correct orientation
• Clean surrounding area and check for trapped debris in the sump before installing the new filter

This duct-free micro filter system replacement helps capture grease and reduce cooking odors in recirculating microwave/hood installations, restoring proper air recirculation and improving kitchen air quality. What it does:

• Replaces the duct-free micro filter assembly used for recirculating ventilation
• Traps airborne grease and cooking particulates to prevent buildup in the unit
• Helps reduce common cooking odors when the oven/microwave is in recirculation mode
• Visible filter discoloration or heavy grease accumulation are signs it may need replacement

• One replacement duct-free micro filter assembly

• Disconnect power to the appliance before servicing
• Typically installs by accessing the filter area per the appliance service instructions
• Handle the filter gently to avoid damage; dispose of the old filter per local regulations

The RFID Water Filter Board is an OEM part for GE refrigerators. It is an electronic component located inside the filter housing that reads the RFID chip in Genuine GE water filters. The board monitors filter life and provides notification when it's time for a replacement. 

Symptoms of a bad RFID water filter board include:

• Inability to detect when a new filter is installed  
• Error codes or filter life indicators not functioning properly
• Water dispenser not working or dispensing unfiltered water

Causes may include damage from moisture or leaks over time, failure of electronic components, or normal wear and tear.

This replacement board is also compatible with Hotpoint, RCA, and some Kenmore models.

This water filter manifold is the assembly the MWF cartridge locks into, sealing the connection and routing water through the filter to your dispenser and icemaker. Replacing a worn manifold can stop leaks and restore normal water flow. What it does:

• Holds and seals the MWF water filter cartridge
• Directs filtered water to the dispenser and icemaker
• Can help resolve leaks at the filter head, slow/low flow, or no water/ice
• Addresses issues where the filter won't seat or keeps popping out

• 1 water filter manifold assembly

• Unplug the refrigerator and shut off the water supply; dispense water to relieve pressure
• Keep a towel handy for residual water and take photos to note tube routing before removal
• Fully seat tubing and connections during reassembly; ensure the filter locks in securely
• Restore water and power, then check for leaks and run water to purge air