General Electric Filter

The Water Filter Housing Assembly is an OEM part for GE refrigerators. The water filter head holds the water filter and connects the water lines to the water filter. Includes the filter head and water lines.

Causes can involve cracks, deformities or wear to sealing surfaces over time. Accidental dents or impacts may compromise housing integrity.

Symptoms of a bad housing assembly include:

• Leaks or drips around the filtration compartment
• Inability to properly seat replacement cartridges
• Failure of water lines to engage the filtration system

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Grease Filter is an OEM part for GE microwaves. It is responsible for trapping grease and other particles from the air as it circulates through the microwave's ventilation system.

You should replace this grease filter if it becomes clogged, damaged, or worn out. Causes of a bad grease filter include prolonged use without cleaning, accumulation of grease and food particles, or physical damage to the filter mesh.

Symptoms of a bad grease filter include:

• Reduced ventilation efficiency
• Lingering cooking odors
• Excessive grease buildup on surrounding surfaces

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Air Filter is an OEM part for GE microwaves. This filter is designed to remove grease, smoke, and odors from the air that passes through the microwave's ventilation system, particularly in over-the-range models.The filter measures about 5 inches wide by 7-1/2 inches deep.

Over time, regular cooking can cause buildup on the filter, reducing its effectiveness. Regular maintenance is essential to ensure proper air filtration.

Symptoms of a bad Air Filter include:

• Persistent cooking odors in the kitchen
• Reduced ventilation performance
• Visible grease buildup on the filter
• Smoke not being effectively filtered during cooking

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE refrigerator water filter is an OEM replacement part responsible for removing impurities and contaminants from the water supply in the refrigerator. The filter is specifically designed to effectively filter out various potentially harmful contaminants. The water filter connects to the water line, ensuring that the water dispensed from the refrigerator's water dispenser or used for ice making is clean, clear, and free from unwanted particles or odors.

The GE refrigerator water filter can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms:

• Foul odor or unpleasant taste in the dispensed water or ice cubes
• Reduced water flow from the dispenser
• Visible discoloration or particles in the water
• Decreased effectiveness in filtering out contaminants
• Filter replacement indicator light or message appearing on the refrigerator display
• Filter lifespan reaching its expiration date

The Charcoal Filter is an OEM replacement part for GE microwaves. It helps control odors within the microwave by filtering the air during the cooking process. As microwaves heat up food, vapors, and smells can get trapped inside. The charcoal filter works to absorb and neutralize these odors before they are released back into the air.

Causes of a bad filter include exceeding the recommended replacement schedule or exposure to extremely pungent cooked foods on a regular basis.

Symptoms of a charcoal filter that needs replacing include:

• Noticeable odors emitted from the microwave when in use or just after cooking
• Food taking on smells from previous meals
• The filter material appears exhausted or completely dark/black

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lint Filter Assembly is an OEM part for GE dryers. This part captures lint and debris from the air flowing through the dryer, preventing these particles from clogging the vent and ensuring efficient airflow.  

Causes of a bad lint filter assembly can include physical damage such as cracks or breaks, wear and tear from regular use, or clogging from excessive lint buildup that can't be cleaned effectively.

Symptoms of a bad lint filter assembly include:

• Lint buildup on clothes after drying
• Longer drying times
• The dryer overheating
• Visible damage or warping of the filter assembly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grease Filter is an OEM part for GE range hoods. It is designed to trap grease and other particles from the air that circulates through your cooking appliances, preventing buildup within the ventilation system. 

Causes of a bad Grease Filter can include saturation from accumulated grease and debris, which can limit its effectiveness and airflow. Over time, the filter can also become damaged or corroded, reducing its ability to capture and hold grease particles.

Symptoms of a bad Grease Filter include:

• Visible grease buildup on the filter surface.
• Reduced effectiveness in venting smoke or cooking odors.
• Increased smoke and odors lingering in the kitchen during and after cooking.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Lint Filter is an OEM replacement part for GE dryers. This lint filter is designed to trap lint and debris from clothing during the drying cycle, preventing it from entering the dryer's exhaust system. By capturing lint, the filter helps maintain airflow efficiency, ensuring optimal drying performance and reducing the risk of fire hazards.

Over time, lint filters can become worn, torn, or clogged due to regular use. A damaged or ineffective filter may allow lint to bypass the trap, potentially clogging the vent system and impacting dryer efficiency.

Symptoms of a bad lint filter include:

• Visible tears or holes in the filter mesh
• Excessive lint buildup in the dryer drum or vent
• Longer drying times or reduced drying efficiency
• Difficulty fitting the filter securely into its slot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The 36" Filter is an OEM replacement part for GE range hoods and ventilation systems. It is designed to capture and remove grease, smoke, and odors from the air, ensuring a clean and fresh kitchen environment.

Symptoms of a clogged or faulty range hood filter include:

• Reduced airflow and poor ventilation performance
• Visible buildup of grease or residue on the filter surface
• Strong cooking odors lingering in the kitchen

Causes of a bad filter can range from normal accumulation of grease and grime over time, exposure to high heat or humidity, or physical damage from improper cleaning or handling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore range hood models. 

The 30" Filter is an OEM part for GE range hoods and microwaves, specifically designed to ensure a clean and efficient ventilation system. This filter is essential for trapping grease, smoke, and cooking odors, creating a cleaner kitchen. 

Causes of a faulty 30-inch filter may vary. Grease buildup and debris reduce airflow and efficiency, while damage like bending or tearing can hamper contaminant trapping. Regular use and cleaning may weaken the filter, increasing the risk of failure.

Symptoms of a bad 30" Filter include:

• Odors or smoke lingering in the kitchen longer than usual.
• Increased noise from the ventilation system
• Visible signs of saturation or damage to the filter

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Filter is an OEM replacement part for GE built-in range hoods. It captures grease, smoke, and other cooking emissions before safely venting air outside. This filter measures approximately 23 1/2" X 6".

Causes of filter clogging generally involve accumulated residue after periods of frequent cooking. Not cleaning or replacing as use requires also accelerates blockages.

Symptoms of a blocked filter may include:

• Reduced suction power and airflow
• Difficulty seeing through a dirty filter grate
• Excessive grease buildup on interior surfaces and appliances below

This GE replacement is also compatible with brands like Hotpoint, RCA and select Kenmore hoods

This charcoal filter is used on microwave ovens to filter grease and other air contaminants during cooking. This filter contains charcoal for added filtering and is not washable. When the filter becomes clogged, it must be removed and replaced. If the air filter is clogged, smoke and fumes will not be cleaned, and the room will fill with odors during cooking. The charcoal filter catches grease spatters, and if greasy foods are cooked often, the filter will need to be changed more often. The filter should be removed and replaced regularly and anytime that it is not working efficiently. Removing the filter does not require tools. Pull the old filter straight out and push the new one in place.This charcoal filter is a silver metallic part that is sold individually. It is designed for use in microwave ovens designed by General Electric.

This drain pump filter traps lint, coins, and small debris before they reach the pump, helping your washer drain properly and protecting the pump from damage. Replace a broken or clogged filter if you notice slow draining or a leak at the filter access.

• Screens out debris before it reaches the drain pump
• Helps maintain proper draining performance
• Common symptoms of a failed or missing filter: not draining/slow drain, leak at the filter access, or pump noise from debris
• Prevents hard objects from entering the pump and causing damage

• Disconnect power and turn off water before servicing
• Expect residual water; place towels or a shallow pan under the filter area
• Access the filter, unscrew and remove the old filter, and clear any debris from the housing
• Install the new filter and hand-tighten to seal; run a short drain cycle and check for leaks

Comes with two grease filters in a pack. Color: metallic. Each filter measures about 5 inches wide by 8 inches deep.

This filter reduces contaminants and removes chlorine taste and odor to provide cleaner, fresher water. The coconut carbon activated filtration media removes microscopic particles down to 0.5 microns. Compatible with select GE side-by-side and bottom-freezer refrigerators. Simple twist and lock design provides easy, tool-free, no-mess filter replacement. For best filtration results, filter cartridge should be replaced every six months or 300 gallons. Filter Media: Coconut Carbon Block. Micron Rating: 0.5. Filter Type: Canister. Flow Rate: 0.5 gpm. Approximate dimensions: 5 x 3.5 x 3.5 inches. Temp. Range: 33 - 100 °F. Press. Range: 30 - 120 PSI. Meets NSF Standard: 42. Approved for WQA Gold Seal. This part replaces the MWF filter.

Color: metallic. Measures about 5 inches wide by 7-1/2 inches deep.