General Electric Filter

This water filter manifold is the assembly the MWF cartridge locks into, sealing the connection and routing water through the filter to your dispenser and icemaker. Replacing a worn manifold can stop leaks and restore normal water flow. What it does:

• Holds and seals the MWF water filter cartridge
• Directs filtered water to the dispenser and icemaker
• Can help resolve leaks at the filter head, slow/low flow, or no water/ice
• Addresses issues where the filter won't seat or keeps popping out

• 1 water filter manifold assembly

• Unplug the refrigerator and shut off the water supply; dispense water to relieve pressure
• Keep a towel handy for residual water and take photos to note tube routing before removal
• Fully seat tubing and connections during reassembly; ensure the filter locks in securely
• Restore water and power, then check for leaks and run water to purge air

Note: This filter is approximately 12" x 14". (Qty of one)

This Grease Filter is an OEM part for GE range hoods. As a key filtration component, this rectangular filter works to capture cooking emissions like grease, smoke and odors above the cooktop. It prevents these contaminants from recirculating back into the kitchen or home.

Causes of a bad filter can include excessive use over time, washing with improper cleaning solutions, or damage during removal/installation.

Symptoms of a bad filter include:

• Reduced airflow and suction from the range hood
• Grease or smoke escaping from the hood despite ventilation usage
• Unpleasant cooking smells lingering in the kitchen

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

Approximate dimensions: 15.3" x 4" x 4"

This D filter is the dryer lint screen that traps lint and debris from the drying drum, helping maintain proper airflow and reduce lint build-up for more efficient drying. Fits dryers that use a D-shaped lint screen. What it does:

• Captures lint, fibers and small debris to prevent them from re-entering the drum or vent
• Helps maintain airflow to avoid longer dry times and poor drying performance
• Reduces lint buildup that can contribute to overheating or vent blockages
• Works as the removable screen you clean between cycles to keep the dryer running efficiently

• One D filter

• Disconnect power before inspecting or replacing the lint screen
• Remove the old screen by pulling it out of the housing, clean the housing, then insert the replacement until it seats fully
• Clean the screen after each load; replace if cracked, warped or damaged
• If dryer still shows poor airflow after replacement, inspect the venting system for blockages or damage

Water filter removes contaminants and turbidity from the water supply to improve quality. For optimal performance, filter should be replaced regularly. Quick, simple installation requires no special tools.

The Grease Filter is an OEM part for GE range hoods. It is responsible for trapping grease and other particles from the air as it is drawn through the hood, helping to keep the kitchen environment clean and free of contaminants.  The filter measures approximately 9" x 16".

Causes of a bad grease filter can include clogging due to accumulated grease and debris, damage from cleaning or mishandling, and general wear over time that reduces its effectiveness. 

Symptoms of a bad grease filter include:

• Reduced airflow through the range hood
• Unpleasant odors lingering in the kitchen
• Grease buildup on kitchen surfaces
• Visible dirt and debris on the filter

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

When replacing the original metal canister design (Water by Culligan) filter for the first time, this adapter needs to be installed. The adapter is reusable, so there is no need to replace it the next time you replace the filter. For filter order MWFP.

This shower replacement filter can be used with the GE GXSM01HWW shower filter unit. Reduces the effects of chlorine on skin and hair and has a filter capacity of 10,000 gallons or six months. This shower replacement is NSF/ ANSI Standard 177 Tested and Certified. Carbon spun fiber filtration. Flow rate: 3 to 10 gallons per minute.

The GE Filter, Baffle is an OEM part for GE range hoods. This baffle filter plays a role in maintaining clean air in your kitchen by trapping grease and other particles that arise during cooking. Its design not only improves ventilation but also helps protect the range hood's motor and interior components from damage caused by grease buildup.

Regular maintenance, including cleaning and, when necessary, replacement of the baffle filter, is essential to keep your range hood working efficiently. Over time, filters can become so saturated with grease and debris that they cannot be effectively cleaned, necessitating replacement.  

Symptoms of a bad GE Filter, Baffle include:

• Decreased airflow or efficiency in venting smoke and odors out of the kitchen.
• Visible grease buildup or damage to the filter, indicating it's no longer functioning properly.
• Unusual noises from the range hood, which can be caused by air struggling to pass through a clogged or damaged filter.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.