General Electric Hinge Parts

This bottom hinge pin supports and serves as the pivot for the refrigerator door. An accurate, tight-fitting hinge pin helps the door swing smoothly and seal properly to maintain temperature and reduce wear.

• Serves as the lower pivot point for the door on the bottom hinge
• Helps keep the door aligned for proper closing and gasket contact
• Replacing a worn pin can improve door movement and reduce stress on the hinge

• Unplug the appliance before servicing
• Support the door to relieve weight from the hinge before removing hardware
• Transfer any spacers/shims in their original order to maintain alignment
• Tighten fasteners securely and check door swing and seal after installation

Oven doors utilize door hinges to open and close efficiently. There is a door hinge attached to opposite ends of the door, and the part is also connected to the range. With time, the hinges can wear out, get damaged, or break off. When the hinges are no longer functioning correctly, replacement parts are necessary to continue using the appliance.An indication that there is a problem with the door hinge on an oven door is difficulty opening or closing or a door that partially slips on one side or the other out of position. A visual inspection will determine the condition of a door hinge. The replacement of the piece is simple. Unplug the range from its power source before starting the repair. Wear gloves for protection. Check the condition of both hinges before ordering. This door hinge is an authentic OEM replacement part. It is sourced directly from the manufacturer. The piece is sold as an individual unit. The door hinge fits several different models of ranges. The replacement part is compatible with appliances produced by General Electric, Hotpoint, and RCA. It is manufactured using high-quality, durable metal materials.

Right-side refrigerator door hinge that supports and pivots the door for proper alignment and smooth operation. Replaces a worn or damaged hinge to help restore even closing and reduce door sag or binding. What it does:

• Provides the pivot point that supports and aligns the right-side door for proper sealing.
• Restores even door movement and helps eliminate sagging or drooping that prevents the door from latching.
• Helps stop binding, sticking, or noisy hinge action that can occur with worn pivot points.
• Works with the door mounting points to maintain correct gap and compression for the gasket.

• Disconnect power or unplug the appliance before servicing to avoid electrical hazards.
• Support or remove the door before removing the hinge; doors can be heavy and may contain glass shelves—use a second person if needed.
• Use appropriate hand tools and retain any original screws/fasteners.

This top-closed thimble is a small protective plug that presses into a cabinet opening to cap and finish the hole, helping prevent abrasion and limiting air or moisture leaks for reliable appliance performance.

• Caps and seals an unused hole/opening in the liner or cabinet
• Shields edges to help protect nearby wiring or tubing from chafing
• Helps reduce drafts and moisture migration that can contribute to frost, condensation, or temperature swings
• Replace if cracked, brittle, loose, missing, or if you notice gaps or rubbing noises

• Disconnect power; if applicable, turn off the water supply
• Access the opening, remove the old thimble/plug, and clean the area
• Align and press the new thimble into the hole until fully seated and flush; avoid pinching wires or tubing
• Restore power/water and verify a snug fit

This hinge assembly replaces a worn or damaged refrigerator door hinge to restore proper door alignment and smooth opening and closing. Install this part to stop door sag, rubbing, uneven gaps, or noisy operation. What it does:

• Supports and guides the door during opening and closing for stable operation
• Restores proper door alignment to eliminate sagging or uneven gaps
• Stops rubbing, scraping, and binding that can prevent the door from sealing
• Reduces squeaks or rough movement caused by a damaged hinge

• Always unplug the appliance and turn off the water supply before starting work
• Support the door and remove contents to prevent damage while replacing the hinge
• Use basic hand tools; align the door carefully and tighten fasteners securely but do not overtighten

This door hinge secures and aligns an appliance door to restore smooth opening and closing. It replaces a worn or damaged hinge to help eliminate door sag and improve seal alignment for reliable operation. What it does:

• Provides a stable pivot point so the door opens and closes smoothly
• Keeps the door aligned to prevent dragging, uneven gaps, or improper sealing
• Reduces noise and sticking caused by a bent or worn hinge
• Helps restore proper door fit that can affect temperature control on sealed compartments

• Disconnect power to the appliance before starting any repair
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use appropriate hand tools and tighten fasteners securely but do not overtighten

A direct-replacement left door hinge that restores proper door alignment and smooth opening on compatible appliances. Helps keep doors closing securely to maintain temperature and reduce wear on seals and hardware. What it does

• Supports the left side of the appliance door and provides a pivot point for opening and closing.
• Restores proper door alignment to help ensure an even seal and consistent internal temperature.
• Reduces door sag and uneven wear that can lead to gaps or rubbing.
• Works with existing pins, screws and strike hardware when the original hinge is worn or damaged.

• Basic mechanical replacement; remove power or disconnect appliance if required by your model before starting.
• Retain original fasteners and hinge pins unless replacements are specified by the manufacturer.
• Align door carefully and tighten fasteners gradually to avoid binding or misalignment.

A complete door hinge assembly that restores proper door alignment and secure closing on compatible GE appliances. Replaces a worn or damaged hinge to stop sagging, rubbing, or uneven gaps and help the door operate smoothly. What it does

• Supports and pivots the appliance door so it opens and closes correctly.
• Restores proper door alignment to prevent rubbing, uneven seals, or difficulty latching.
• Stops door sagging or drooping caused by a worn hinge or damaged mounting points.
• Helps maintain an effective door seal by keeping the door flush with the cabinet.

• Disconnect power (and water supply if applicable) before beginning any repair.
• Remove the door per the appliance service instructions to access hinge fasteners; support the door during removal and reinstallation.
• Use the appropriate hand tools and tighten mounting fasteners securely, but avoid over-torquing.
• If hinge mounting holes or door hardware are damaged, additional repair may be required.

This left-hand arm hinge assembly replaces a worn or damaged door hinge to restore proper door alignment and smooth opening and closing. Designed as the left-side support arm for the appliance door. What it does:

• Supports the left side of the door and secures the door to the cabinet during operation
• Guides smooth door movement and helps prevent sagging or uneven closing
• Stops rubbing, binding, or intermittent contact that can cause noise or poor seal
• Restores proper door fit to maintain normal operation and safety

• Disconnect power to the appliance before starting any repair
• Support the door while removing and installing the hinge to prevent dropping
• Use basic hand tools; verify hinge orientation and alignment before tightening
• Retain or replace mounting hardware if damaged; do not overtighten fasteners

The Wireform Hinge is an OEM part for GE washing machines. This hinge is responsible for connecting the washer door to the main body, allowing it to open and close smoothly. The wireform hinge ensures the door remains securely attached while providing the necessary flexibility for regular use.

Causes of a bad hinge can include constant opening and closing, excessive force applied to the door, or rust and corrosion from exposure to moisture.

Symptoms of a bad wireform hinge include:

• Difficulty opening or closing the washer door
• The door not aligning properly with the washer frame
• Squeaking or grinding noises when moving the door
• The door feeling loose or unstable

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This short wireform hinge secures and guides a door or panel so it opens and closes smoothly. It restores proper alignment and reduces binding or sag that can prevent a door from seating correctly. What it does:

• Provides pivot support for a door or access panel to maintain correct motion and alignment
• Replaces bent, worn, or broken hinge hardware that causes uneven closing or door sag
• Reduces noise and binding during opening/closing when the original hinge has lost shape
• Works with existing hinge mounts and fasteners when in good condition

• One short wireform hinge

• Designed for straightforward replacement; verify correct hinge orientation before removing the old part
• Use appropriate hand tools and keep fasteners organized for reassembly
• Disconnect power or gas and follow appliance safety instructions when replacing hinges on powered appliances
• Address those issues before installing the new hinge

This thimble door is the molded trim piece that surrounds the refrigerator/freezer door opening, restoring proper fit and finish. It replaces damaged or worn trim to reduce drafts and improve door alignment and appearance. What it does

• Covers and protects the door opening edge, providing a finished appearance
• Helps maintain a consistent seal by supporting proper door alignment
• Reduces air leaks and drafts at the door opening when installed correctly
• Replaces cracked, warped, or missing trim that can catch or rub during door use

• One thimble door trim piece as shown

• Disconnect power to the appliance before beginning any repair
• Typically secures with clips or screws; inspect existing fasteners and retainers for reuse
• Handle trim gently to avoid cracking; align carefully to ensure a proper fit

This bottom door hinge supports the appliance door and lets it pivot smoothly for reliable opening and closing. It restores proper door alignment to help maintain an effective seal and prevent sagging or uneven gaps. What it does:

• Provides a stable pivot point for the lower edge of the door so it opens and closes correctly
• Restores proper door alignment to improve sealing and temperature retention
• Stops door sagging or misalignment that can cause rubbing or uneven gaps
• Reduces clicking or binding during door movement when worn or damaged

• Unplug the appliance or turn off power at the breaker before starting work.
• Remove food and shelves as needed and support the door while removing fasteners to prevent dropping.
• Keep original fasteners; reuse if undamaged or replace with OEM hardware.

Right Side

The Door Hinge is an OEM part for GE wall ovens. It acts as the pivot point that allows easy opening and closing of the oven door during use. The durable hinge is responsible for securely yet smoothly swinging the oven door into position.

Causes of failure can be normal wear and tear over extended use. Frequent opening and shutting of a heavy oven door places considerable stress on the hinge. Accidental damage from overloading or impact can also negatively affect performance.

Symptoms of a bad hinge include:

• Difficulty opening or closing the oven door
• Excessive friction or resistance at the hinge
• Noises or squeaking emanating from the hinge area
• Visual defects such as cracks, bending, or loose/missing hardware

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Oven door hinge is an OEM part for GE ranges. This right side hinge is responsible for securely and smoothly opening and closing the oven door. It allows for comfortable access in and out of the oven cavity.

Causes of a bad hinge can include wear and tear from repeated opening and closing of the door over time, stress from excessive weight on the door, or damage from impact.

Symptoms of a bad hinge include:

• The door not opening or closing properly
• Increased resistance or hesitation when operating the door
• Loosening or sagging of the door
• Uneven gaps around the door frame

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a replacement door hinge that restores secure, stable opening and closing for compatible appliance doors. It provides a direct-fit repair to stop sagging or misaligned doors and improve safe operation. What it does:

• Supports and guides the appliance door for smooth open/close operation
• Replaces worn or bent hinge hardware that causes door sag or uneven gaps
• Helps stop rubbing, catching, or scraping when the door moves
• Restores proper door alignment that can affect sealing and function

• One replacement hinge

• Disconnect power (or unplug) and shut off water if applicable before starting repairs
• Inspect mounting screws and strike plates; replace any damaged fasteners for secure fit
• Tighten hardware evenly and check door alignment during reassembly