General Electric Motor

A 45 mm tangential blower that restores directed airflow in heating and cooling cavities to help maintain even temperatures and protect internal components. Fits factory blower mounts and connects to existing wiring harnesses. What it does:

• Moves air along the oven/cabinet cavity to promote even heat distribution and help vent hot spots
• Cools nearby electronics and components to reduce overheating risk
• Replaces worn or noisy blowers to restore proper airflow and reduce unusual motor noise
• Helps maintain designed airflow for venting and exhaust paths

• Disconnect power at the breaker before starting any repair
• Handle with care; blower edges and surrounding sheet metal may be sharp
• Verify blower orientation and wiring match the original before securing
• Basic hand tools typically needed; follow for panel removal and reassembly

This lower cooling fan assembly circulates air to cool internal components and help maintain proper airflow in the appliance. Replacing a worn fan restores quieter operation and helps prevent overheating of electrical parts. What it does:

• Moves air through the appliance cabinet to aid component cooling and temperature regulation.
• Reduces hot spots around controls, electronics, and motors that can cause premature failure.
• Commonly used when you hear unusual noise from the lower area or detect reduced airflow.
• Supports overall appliance performance and reliability by maintaining designed ventilation.

• One lower cooling fan assembly as shown

• Disconnect power before attempting any service to avoid electric shock.
• Inspect surrounding mounts and ducts for damage; replace any broken clips or supports.
• Use basic hand tools; confirm correct orientation and secure mounting before restoring power.

Stirrer motor

This motor assembly kit replaces the dryer's drive motor so the drum turns smoothly and reliably. Restores normal tumbling and helps stop motor noise or a drum that won't rotate. What it does:

• Powers the dryer drum so clothes tumble during operation
• Replaces worn or seized motors that cause the drum to stop turning
• Stops loud grinding, squealing, or humming noises from the motor area
• Helps eliminate intermittent starting or unresponsive drum rotation

• Disconnect power before beginning any repair to avoid shock or injury
• Basic installation involves removing the dryer front or rear panel, disconnecting wiring harnesses, and replacing the motor assembly
• Check belts, idler pulley, and drum support rollers while servicing; replace if worn

This motor ventilation part is the replacement vent fan motor that moves air through the appliance for proper cooling and exhaust. Replacing a failed vent motor restores airflow and helps the appliance maintain safe operating temperatures. What it does

• Spins the ventilation fan to move air for cooling or exhaust
• Helps prevent overheating by promoting proper airflow
• Can stop symptoms such as reduced or no exhaust, weak airflow, or abnormal motor noise
• Works as the airflow drive component in the appliance's ventilation system

• Disconnect power to the appliance before starting any repair
• Basic mechanical skill and common tools are usually required; refer to the service manual for disassembly instructions

This motor and pulley kit replaces a dryer's failed drive motor and pulley assembly to restore drum rotation and normal drying performance. Designed as a direct-fit service kit for compatible GE dryers. What it does:

• Replaces the dryer drive motor and pulley to restore drum tumbling.
• Restores proper belt drive and helps recover normal drying and ventilation.
• Can stop or reduce symptoms like a drum that won't turn, loud grinding, or a dryer that runs but doesn't tumble.
• Designed to work with the dryer's existing belt and mounting hardware when applicable.

• One motor and pulley kit

• Disconnect power to the dryer before starting any repair.
• Basic hand tools are typically required; remove the dryer cabinet or access panel as needed.
• Support the drum while replacing the motor; follow the appliance's service manual for routing the belt and aligning the pulley.

This 1-speed dryer motor drives the drum and blower to circulate air and tumble clothes for drying. It replaces a failed motor to restore normal drum rotation and airflow in compatible dryers. What it does:

• Spins the drum and powers the blower to move air through the drum and venting.
• Starts and maintains consistent tumble speed for even drying.
• Can resolve symptoms such as no drum rotation, a humming motor, intermittent spinning, or burning/motor smell.
• Works with the dryer's clutch or idler assembly when applicable.

• Disconnect power at the breaker or cord before starting any repair.
• Access typically requires removing the dryer front or back panel and disconnecting wiring harnesses; keep screws and fasteners organized.
• Inspect and replace any worn belt, idler, or clutch parts while the unit is open to prevent repeat failures.
• If you smell burning or see damaged wiring, stop and address electrical concerns before reinstalling the motor.

The Blower Motor is an OEM part for GE ranges. Within the oven cavity, it circulates air to help distribute heat evenly for thorough cooking.

Causes of a bad Blower Motor include wear from long term use, residue buildup on fan blades inhibiting air movement, or electrical issues such as loose wiring connections or a burned out motor coil.

Symptoms of a bad Blower Motor are:

• Inconsistent or improper baking and broiling
• Hot and cold spots inside the oven cavity
• Extended cooking times needed for foods

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This evaporator fan motor circulates cold air from the evaporator coil throughout the refrigerator's fresh-food and freezer sections to help maintain even temperatures. Reliable airflow prevents hot spots and uneven cooling. What it does:

• Spins the evaporator fan blade to move air over the evaporator coil for consistent cooling
• Helps prevent frost buildup and uneven temperatures caused by stalled or noisy fans
• Commonly replaced when the motor hums, does not start, or the fan blade doesn't spin
• Reduces excessive noise from a worn or failing motor bearing

• One evaporator fan motor assembly

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover and support the fan blade while detaching the motor
• Match wiring harness connections and secure mounting screws; do not force components
• Test fan operation with power restored and verify airflow before reassembling covers

The Turntable Motor is an OEM part for GE microwaves. It is responsible for rotating the glass turntable plate during cooking, ensuring food is evenly heated throughout the microwave cavity. 

Symptoms of a bad turntable motor include:

• The turntable not spinning at all or rotating unevenly
• Loud grinding or clicking noises coming from the motor area  
• The turntable plate wobbles excessively during the operation

Causes can be normal wear and tear over time from continuous use, failure of electronic components in the motor, or damage from heavy loads or impact. This GE replacement motor restores even cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today before a minor problem becomes a major repair bill. Continued use without a properly functioning turntable can damage other microwave components.
 

The Motor Assembly is an OEM component specifically designed for GE laundry machines. This assembly contains the motor and blower wheel that are responsible for forcing air through the dryer and circulating hot air around clothes during the drying cycle. 

Causes of a bad motor assembly can include wear and tear over time, exposure to high heat cycles that can depreciate motor insulation or bearings, or damage due to impact or mishandling. 

Symptoms of a bad motor assembly include:

• The dryer not heating or only heating intermittently  
• Loud grinding or knocking noises originating from the motor area
• The blower wheel no longer spins or turns slowly
• Extended drying times 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.