Brandon B. for Model Number WTA3510UC/13 I press the start button but the dryer won't start light comes on but does not start the drying cycle.
Answer Hello Brandon. Check and make sure the heater and fuses are good. They should read closed for continuity. Also the door switch should read closed with the door closed. If so, and it does not start, you will need to replace the control module 00481590. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, November 28, 2011