Brian for Model Number WTMC4321US-06 Hi - My dryer does not heat and yet my heater element has a resistance of about 10 Ohms. Is this a normal resistance, and if so what else could be the problem?
Answer Hello Brian. It is a little low, but if it is closed for continuity, it should be good. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter MA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, March 11, 2014