John Doe for Model Number SHE44C02UC / 46 All cycle times are longer (Power scrub wash 158, regular wash 146, quick wash 52, rinse 9). Water heater does not appear to be heat water. Diagnostic Procedures (press and hold regular wash / rinse buttons, then press power switch) cycle count down states PO, quick wash light is on solid, rinse light blinks. If continue to press buttons, additional lights come on and off. How can I determine if i need a thermistor, heater or control module?
Answer Hello Jon Doe. You can test this with a multi-meter TJMA-DMT3. The heater should read closed. Thermistor ohm value needs to be correct. If so, replace the board. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, November 15, 2013