Kent for Model Number FRT18KG3CW2 Hi: I just added the IM15 icemaker kit to a Frigidaire FRT18KC3CW2 refrigerator. The icemaker works and seems to cycle properly for the first few batches of cubes. However, when the water valve cycles, the water volume/pressure is high enough that a portion of it overflows and splashes out of the fill cup and drains into the ice bucket. It still makes ice cubes, but I end up with a solid block of ice in the bucket. I originally installed a braided steel icemaker supply line and thought perhaps it was delivering too much water. I replaced that with 1/4" copper per the installation instructions but the problem persists. Any ideas?
Answer Hello Kent. Remove the cover on the icemaker and adjust the cube size down some and see if this stops the over flow issue. If not, the pressure to the unit may be to high and you will need to reduce house hold water pressure. Sometimes turning the water shut off half way closed will help with this also. Read More... Answered by AppliancePartsPros.com | Monday, August 3, 2015