Steve for Model Number ge washer s1070a1ww The washer has been leaking water. I pulled the front off and found everything dry. I filled the washer tub about a 1/4 way with water ran a cycle and did not see any leaking water. When it got to the rinse cycle it would not fill with water. I set the dial it will not fill with water. I have checked the hoses and disconnected and have water throught the cold and hot water hoses. Please advise. Thanks Steve
Answer Hello Steve. If there is power to the water valve WH13X10024 on the unit, and no water is coming out, you will need to order and replace the water valve on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, October 2, 2013