Garcia for Model Number NFW7200TW I have an Amana front load washer. It will not spin. The door was locked and I had to pry it open to get the clothes out. It makes a noise as if the spin cycle wants to starts but then it quits. Spin never starts. I took off the back panel and put the control to spin only and it makes a noise but nothing is turning...The drive motor or the tub. The belt is nice and tight but the motor is not turning the belt. Any advice you can give me will help. Thanks
Answer Hello Garcia. Test the motor. If good, replace the board. Normal resistance is approximately 3.0 O between any 2 pins (1,2 or 3) on motor. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, September 29, 2017