Customer Questions and Answers for Overload/Relay Kit by Whirlpool

Hi Johnny. The blue wire goes to the overload which slides on the single pin on the compressor. Not the 2 that are side by side, it is (formed in a triangle) exactly where the original blue wire /overload connection was. Then use the orange wire to hook to the # 2 terminal on the relay. The capacitor connects at pin # 2 and # 3 of the relay. The jumper was an optional part if one of the orange wire did not fit directly on the relay, on some a narrow female spade terminal was used on the orange wire so the jumper hooked on the small terminal and transferred to a regular 1/4" terminal at the relay end. You can crimp a 1/4 " female spade terminal and hook to the relay at # 2 on the relay. The orange wire is the neutral feed from the adaptive defrost control board. Thank You.