Mattg for Model Number WPRBD245PDS14 Whirlpool/Black Double oven is showing no LED's - Top. Light comes on and all the buttons beep. I have shut it off for 10 minutes - no change. The buttons beep and Light comes on for top/bottom. Once the oven started (without LED) and then it immediately stopped... So, is the control board gone or is it the Thermal fuse on the bottom or the Fuse on the top. Doesn't sound like the control board.. Any help would be appreciated... Thanks, Mattg
Answer Mattg, If the control beeps when you hit the buttons but there is no display then you will want to check the transformer. There should be 120 vac going into the transformer and your test points for the transformer are on the control board Connector P16 pins 5 to 7 for 120 vac. Then check P16 pins 2 to 3 for 12 to 24 vdc. If there is power into the transformer but no power out then the transformer is faulty. If there is no power to the transformer then the control board is the issue. Read More... Answered by AppliancePartsPros.com | Monday, October 7, 2013